Search the Community
Showing results for tags 'controls system'.
Found 36 results
-
PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc. It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems). For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices. (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc. All the MB public/native function codes are supported. 32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic. Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later. Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services -Other Non-AB communication drivers for serial or TCP -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
-
Hi, Doses anyone know how I can move data from Metasys Data Base to another database using MatrikonOPC. Thanks..
-
Spectrum Controls 2080sc-IF4u Analog Module
Damica posted a topic in Allen Bradley / Rockwell Automation
Has anybody used the Spectrum Controls 2080sc-IF4u analog module? This is a 4 channel analog module for the Micro800 series? I'm trying to set input 4 to (0-5v, x10(format)2-wire, 60HZ). I need someone to help me figure out the bit setting. This is what I have LSB=44 and MSB=44 could some else confirm this? Thanks -
Looking for Senior Controls Engineer
rmlewisgg posted a topic in For Sale, Employment, Services or Wanted
In need of Senior Controls Engineer for a privately owned consumer goods company in PA. Duties *Maintain DCS's, PLC's, HMI's servo systems, motor drives, sensors *Perform high level trouble shooting *Leads Controls Support *Provide technical and operating training to production, warehouse and other personnel as needed *Provides training of Control Technicians with new control equipment or schedule outside training to enhance troubleshooting skills Requirements *8 years experience *BA in Electronics/Electrical Engineering, computer science or related field *5 year supervisory experience *Hands on *High speed manufacturing environment -Tech intensive *Leader/good mentor Please Contact me at 1-800-966-8095 ext 203 and send emails to rob@grevenandassociates.com Thank you, Rob Lewis Executive Recruiter Gregg Greven and Associates rob@grevenandassociates.com -
Updating PanelView C600 Clock from Micro850
bainsteven posted a topic in Allen Bradley / Rockwell Automation
Hiya Guys, New here (first post!) - and I'm fairly new to Connected Components Workbench, so apologies for the mammoth post! I am currently developing a System using one Micro850 PLC and one PanelView C600 HMI. I am able to update the current HMI time by sending Unsigned-Integers to Global Connection Tags: System Clock – Hour ($SysClockHour);System Clock – Minute ($SysClockMinute);System Clock – Second ($SysClockSecond);However, if using the same “update time” more than once, this method does not work as the HMI is looking for a “change” in a Tag before an update occurs (Tag-specific). For example, we require to be able to receive a “synchronisation signal” on a digital-input on the PLC each day at 15:00:00. This will only work once as, even though the HMI’s current time updates every second, I will still be sending the values “15”, “0”, and “0” to the above Tags (which will therefore not force an update – as they haven’t changed). I cannot reset these Tags without updating the current Time – as any number “out of range” causes an error (incidentally the errors are shown on the HMI to occur on Tags “SysClockSecondTimed”, “SysClockMinuteTimed”, and “SysClockHour” – note the omission of the word “Timed” on the Hours error…). There appears to be no reference to these “Timed” Tags anywhere in CCW, and I have no idea why the “Hour” update errors on a different (the correct?!) Tag. It’s a pretty confusing problem and difficult to explain… it took me a while to get my head around it – and I can see what the code is doing! J I've looked for documentation on how these Global Connection Tags work, but I can't find anything. Everything I (think I) know so far is from extensive testing... so if anyone knows of any documentation, or has any suggestions as to how I can achieve the required result - that would be massively helpful! Thanks for taking the time to read all this! Cheers, Steve. -
Hello Experts, Good day to you all. I just can’t figure how I will integrate five S7-300 PLC. CPU 315-2dp. (1.Blow moulding-> 2. filler-> 3. labeller-> 4. packer-> 5. Palletizer) I just want to get the speed of its machine, the output rate and the alarm, this is purely monitoring, archiving, no need to control anything here. I planning about SCADA system. I’m thinking if I could do the same way in my previous project, which I’ve done in profibus master/slave for two s7-300. But this time the five PLC’s already set the profibus as master to the danfoss drive, sew drives, ET200s and many more profibus slave. I plan to buy 1 PLC as master and I will set all as slave, but how since all the five existing PLC, its profibus already configured as master. Thank you very much. All your inputs is really appreciated.
-
Hello all, I am experiencing an unusual (and what appears to be an unheard of) behavior in my CompactLogix L18ER controller. I am setting the date/time of the controller from my work station, however when I GSV WallClockTime, it is reporting 4 hours different. I have asked our local resources as well as done some forum and knowledgebase searching without result. Has anyone encountered this before? Attached is a screenshot of the controller time vs. the wall clock time. This isn't mission critical since it can be manually adjusted however I would like to understand what is taking place that would cause this behavior. Thanks!
-
Hi everyone, I want to develop a logic for security alert system. I have to generate an alarm at irregular time intervals. No one should know the time interval. PLC has to give a digital output at any time. How to create this logic? Regards Joshua
-
I have helium cylinder. I want to have a control application where the process should stop when the pressure in the cylinder decreases to certain level. Can any one help me to find the right sensor? or application to do this. Thank you, SKR.
-
Hi, I have a problem with my BC9020 and hope that someone can help me. I managed to set the IP adress of my PLC in the 10.2.5... add a root, run a program and make the PLC working for a while. I then tried another program, a new one... and now that I want to re-read the first program, Twincat System Manager doesn't allow me to enter in the "run mode" and stays in "config mode". It also has lost the IP address I set (10.2.5.....) and came back to the 172.16.22... (manufacturer settings) I cannot determine if the problem is in the PLC Control or In System Manager... This is my method to change the IP *** IP config *** 1) Reset the PLC First I place the end terminal next to the PLC. I set the DIP switches 1,6,7 to ON, power on the PLC and power off. I set the DIP switches 2,6,7 to ON, power on the PLC and power off. I set the DIP switches 1,2,6,7 to ON, power on the PLC and power off. 2) Set my PLC on the same AMS than my own IP (172.16.22...1.1) 3) In System Manager, add a new route 4) change the setting in I/O Configuration -> I/O Device -> Device 2(BX9000) -> clic on BX9000 define "set IP Address" to Manual define " IP Address" to 10.2.5...., the AMS change automatically. Press the configuration button and then Ctrl+F4 (run mode) This method worked but seems not to be the best... If you have any Ideas ? or questions? Thank you in advance Gregi
-
I currently have a NT21HMI that does not have the system software loaded. I do not have any system programs with the *.21 extension. Where can I find the NT21 system software?
