Search the Community

Showing results for tags 'connection between cx-programmer and advanced hmi'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 178 results

  1. version incompatible

    I'm supposed to send the software from one machine to the other. The Dwonload but who does not want to open with the CX Programmer: comes version incompatible. But I do not want to pay 700 € for an update I just want a tool that allows me to send this data in the other machine. Weir has an idea or who helps me I pay the service. The machines are in Austria in Saint Pölten.
  2. CX-Simulator

    Hi guys, Do you have experience or know any good guides to set up a simulation case like this: - Simulating a PLC program such that the "PLC" is accessible on the Ethernet (for example just locally). - In addition, setting up the PLC settings with FINS protocol such that it is possible to write to the PLC with FINS protocol from another device. The first part is  most important. Best regards PC_VS_PLC
  3. Program help

    So I need some help with a program I am currently making, and wodnered if there was an easy way to make it. The function I need help with is this: There are 4 pumps, and 1 of them is going to start, after 10 sec shall the next start, so 10 sec after that the third one. And so like this it continues. But heres the clue. The pump which have been used the least is going to start first, if it is pump 1 that have been used the least, or if pump 3 has been used the least. If you know of any function block, or other way I can do to make this work, I would love the help.   (I know of the comparison blocks less than and more than, but with these I only can think of 1 way to make this work. And it would be over 48 function blocks, which I personally think is too much)
  4. "This type of PLC is not supported", this is the error which appears when I try to connect cx programmer V9 to CJ2M-CPU11 using a USB (A type - B type) cable. Please help me resolving this error.
  5. CP 1E NA ANALOG INPUT PROBLEM

    Hello Friends I am using  Omron PLC  CP 1E NA series, i have connected 4-20 mA input source to its first inbuilt analog I/P channel, I am uanble to programm the channel no 1,  how to get readings of the same? can anybody help?
  6. Hello. I have some issues with starting cx-programmer. It wont start. The start up screen shows, then closes, says that cx-programmer is running, but it is not, it is an empty window. When I look in task manager it says the program uses 0% of the processor, but it uses ram. Do you have any idea of how get the program to start the program again.
  7. Profibus Function Blocks for Q2ASCPU for Melsec ST Lite RIO inter-connection. Please assist in advising the attainment of such blocks - if any existing. Thanks
  8. I want to unify my programs and select only configuration words (the same program for many applications) . My problem is with the assigned outputs by the high-speed pulse output like PLS2, ACC, ORG ... I thing that the instructions JMP/JME may allows to use these outputs as normal outputs when HSPO functions is not required. Is it right ?
  9. Hi all, I will be starting on my MSc in automation in a couple of days so for that reason i have obtained a S7-1200 series 1211AC/DC/RLY PLC. This is a new area for me as i have been working in offshore since i graduated from my BSc a couple of years ago. I watched some Youtube tutorials on how the programming is done and i am ready to try it out for myself, but i have encountered a little problem.   Problem: I am using the X1 P1 PROFINET (LAN) port as a connection to my PC, this turns the Green Link light on and the Rx/Tx lights blinks orange. Now to the problem, i cannot connect to the PLC through the TIA portal, no matter what settings and connection types i use in the PG/PC interface box. I have had no luck finding leturature adressing how to configure the PC/software and get a connection to the PLC. Do any of you have a PDF or link which can help me through this problem?  Hardware: S7-1200 series 1211AC/DC/RLY 6ES7 211-BE40-0XB0 S C-J5PN 1614 2017 FS:05 Software: TIA Portal Version 13 STEP 7 Professional V13 WinCC Basic V13   Thanks   Best regards   Dennis    
  10. Hi all, I have a S7-1200 CPU 1214 DC DC DC and Cm 1241 6ES7241-1AH32-0XB0 communication module.I'm using TIA Portal 14 and i connected cpu but i couldn't connect cm 1241 communication module.When i looked diagnostic i saw" Diagnostics data are not available because the current online configuration data differ from the offline configuration data.".Then i looked for what was the difference.But i didn't see.Are there anyone can help me? Thank you
  11. All, I am looking to hire either a full time PLC programmer or contract programmer that will develop systems in Ignition.  Experience with Ignition is preferred, but if you have other experience that is related, that is also acceptable. Python scripting is prevalent throughout Ignition, so that experience is required.   PLC knowledge is required. ERP system knowledge would be a major plus, as well as how to connect Ignition to it. All are SQL based.  
  12. Is CP1H with Ethernet option board (CP1W-CIF41) is capable to communicate More than one client? If yes what settings I need to be Done?  
  13. On-Off Temperature control

    Hi, i'm actually working on a project with a CPU33 CJ2M and a external analog output CJ1W-AD04U I'm trying to read the informations coming from a PT100 sensor and control a valve which act on the temperature. i'm kind of lost in this project because it's my "first time" with Omron ! Which function block must i use or how must i program this would you show me example ?  Thank you for the help guys.
  14. CJ2M-CPU32 and CJ1W-TC002 help

    Hi everyone. l have a project with omron plc but l dont know omron. l have CJ2M-CPU32 and CJ1W-TC002 also input and output units. do you have a example temperature control programme for this device ? 
  15. Dear all I am new please help me to find out how i can do electrical connection plus control of softstarter ATS48C48Q Schneider brand.I am using this softstarter for 200kw motor heavy duty.i need control this motor beacuse it is taking high torque at starting time.
  16. Hi   I'm all new to using omron but "stuck" with a project. I find the CX Programmer software (version 9.35) a bit confusing. Used Siemens a lot.  What I'm trying to do is to display date and time on a HMI showing cpu startup time. I use a "First cycle flag" that triggers once when CPU starts and then I understand that the date and timestamp is in the system variables A352 and A353. But how do I format them as a normal text? I only manage to display them as #hex-numbers. I have tried googeling but have not found an answer to my questions. edit: CPU type is: CJ1M CPU12 //Morten
  17. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  18. In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  
  19. Hi everyone, now i am doing a project related to communication between c++ and Omron PLC CP1E. Anyone have a way to connect the cx programmer and visual studio c++? Thank.
  20. Hello, attached below is what i have attached above is what i have done so far for the ladder logic when controlling a pump stroke but i cant seem to get it to work  Im using an OMRON CP1LE-EL with CX programmer i use an analog extension board and its only capable for 1 analog device which is my pump  is there something wrong with my ladder logic? pls help    sorry if its lacking in information i'm new to this so just go ahead and ask me what u need to help me out           
  21. Hi, I was wondering if there is a way to limit the number of allowed on-line connections at a time to a PLC? Like can you somehow set in the PLC parameters that only 1 'connection' can be on-line in the device at a time? Thanks Edit: I'm referring to connections from the TIA portal - not HMI / ethernet connections and so forth
  22. TIA Portal v13 - GOT1000

    Hello! Is there a driver GOT1000 for tia portal v13. I would like to do scada for GOT1000 GT14 using the Tia Portal v13. There is a possibility at all?
  23. q04udeh&qj71c24n-r4

    Hello everyone. i use q04udeh cpu and     rs-485 qj71c24n-r4 communication module. I  try to receive information from external device(2000amp power supply). im not a professional plc guy. On that moment i get MSG_RECV_String[7],  and store them in separate buffer from K1B108 to K1B120. i skip one because i do not need that k4B100 , and start from k1B108. I want to show value Voltsx10, but i need some help to do it. when i change value i see numbers from each separate MOV block function, but i can not convert them to decimal.(or i do not know how to do it). When i try BIN command i have error message 4100. Thank you for any suggestions.    
  24. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  25. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard