Search the Community

Hello please could you help me with this problem . I have FX2N-16MT CPU with expansion modules FX2n-16ex-es , FX2n-16ey-es in that order . when i download the program on it and moniter online  i have active output on y22 ,y25, y13, y00, y27 (software) , i only found led of y00 (CPU module) ON , others of expansion op module not  (P.s power lamp on module on ) , however the expansion of ip doing well , .  i do that trails . 1-change combination to be FX2N-16MT CPU - FX2n-16ex-es -  FX2n 16eyr (new one) , but same happen  , when i go to plc diagnostics i found error 1010 i/0 hardware configuration  2-   FX2N-16MT CPU -   FX2n 16eyr (new one) , but same happen 3- FX2n- 14mt CPU (New one ) - FX2n 16eyr (new one) with same program it works ok  .  i wondering how melsoft software recognize expansion module of FX2N series and if it need hardware configurations (by rack like siemens plc ) the way of addressing ip and op in mitsubishi plc FX2n series . how to change it . and if i wanna to change the cpu 16mt , by 14mt ., does i need to change spacial markes or function on the machine program . . i m sry for my bad english and thanks in advance     

sir, i don`t know how to configure Fx2n-4AD AND Fx2n-4AD-PT module with PLC fx1n-60mr please tell me complete detail of program write in GX develpr..if possible...attach picture of program

I have very little experience with Mitsubishi logic and I need to modify an existing program from 1999. I am looking for some insight on how to approach this request. The required change has to have Y035 energize 2x during one scan of the program. (Double stroke the cyclinder) FX2n PLC Y035 connected to a spring return solenoid GX Developer 8.20W (Originally coded with Melsec Medoc 16bit) M855 M630 -------| |------------------------------------------------| |-------------------------------------------------------------------------------------(M857 ) MAN MECH | PWR ON EXT MECH TEST | CYL | | | M645 M860 M760 | ------| |------------|/|------------| |-------------| CYC OK INDX2 OK INDX1 START RET M857 M858 M859 M630 ------| |------------|/|------------|/|-------------| |-------------------------------------------------------------------------------------------(Y035 ) EXT MECH TST OK TST FAIL PWR ON MECH CYL CYL RET RET EXT I can upload source code if anyone is interested. Any suggestions would be greatly appreciated!

Hi, I have a program for FX2N-48mr written in GX Works (gxw). I'd like to convert the software to CodeSys. If possible, can anyone send me the best procedure for it? Thanks. Oren

I am trying to go online, in CXProgrammer, with a CP1L-M60DT1-D PLC. I am connecting with a USB cable (Standard-A on laptop side, standard-B on the PLC side). In my "Change PLC" dialog: Device type is set to CP1L, CPU type set to M. Network type is set to USB. FINS Destination Address Network set to 0, Node set to 0. I get "Failed to connect to the PLC" when trying to go online. Any ideas why? Thank you. (Note; the PLC connection is showing up in my Device Manager, and the correct driver is installed).