Search the Community

Showing results for tags 'compact logix ip remote'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 99 results

  1. View File KRC4 Compact Optional Interfaces KUKA, Optional Interfaces for KRC4 Compact controller such as I/O, fast measure interface etc. Submitter panic mode Submitted 03/02/18 Category Robots and Servos
  2. Remote I/O weidmuller

    Hello,  I am trying to connect a Weidmüller UR20 Ethernet I/P  (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word).   When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.
  3. HOW TO CONNECT AB 1769-L33ER ETHERNET /IP TO MOD BUS RTU
  4. Remote IO

    Hi friends , recently i ve been doing some diggings about remote IO cards, in my factory we have a CJ2m PLC and it communicates with remote IO cards with four numbered words (2080.00 , 2080.01, 2080.02....2080.15 ) and there were several dip switches on the IO cards, which were set but i can't understand what was the basis of that settings. So I'd like to know how these dip switches behave and what are the uses of them ?? and how is it possible to have 4 numbered word bits ?? pls help me someone to clarify this, i tried internet, but cudnt help myself !!!  thank you    Here I attach one of the pictures i took of one of the remote input cards.
  5. Remote Password issue

    Hello everyone, can u help me out please, quite urgent !!! :( i have GS2107-WTBD HMI display along with FX5U-80MT-ESS, i had one of HMI designs made on GT designer 3 by earlier designer (not in my contact now). i uploaded the graphics to HMI module and later it stuck to the initial LOGO screen and doesnt move further, moreover the HMI is not communicating with PC. i suspect it had remote password with it how can i remove this issue or hardware rest the HMI with factory defaults guidance required
  6. Hi PLC programmers, I got a problem regarding my installation of Logix Designer/Logix5K. Here's the situation... a) Initially installed Studio 5000 without problem. b) I needed to open a program from Logix v20.1, installed RSLogix5k v20.1. After installing v20.1, RSLogix was corrupted and won't open program. c) Reinstalled entire Logix Software. d) Was able to open and convert program from Logix5k v20.1 to Logix Designer v24 but this annoying error occured on v24 (See attached "EN2T")... "Failed to Create Module Profile". All of a sudden, the module (1756-EN2T) I created with working v24 is no longer usable. Now, even when I create a new project, add a module with "Select Module Type", the list of available modules has been trimmed down to what it normally has (see attached "AB_Modtype"). Kept on re-installing entire Logix 3 times, clearing the registry with CCleaner and even deleted installation folder for Rockwell software but the problem is never gone. I even downloaded AOP for EN2T and installed it but to no avail. Now I'm lost and dumbfounded that uninstalling and reinstalling isn't working. By the way the OS I'm using is "Windows 7 Enterprise". I appreciate all the help I could get. Thank you very much. Sincerely, Andrei K.
  7. Omron CJ2M - Wago remote I/O

    Hi there, I’m not sure how familiar most of you are with Wago remote I/O, but I hope you may have some solution for the following connection problem I’m having. I’m working on a project to modernise an old folder collecting machine for which I’m using an Omron CJ2M Cpu33 together with 8 Wago 750-352 remote I/O units over ethernet/ip. These Wago units all contain two 8DI digital input cards and two 8DO digital output cards alongside a 750-610 bus power supply card. Adding them to my network in CX network manager is no problem and all seems to work fine. That is, as long as I don’t physically add the bus power supply card, which I need to, well.. power the Wago bus. Soon as I add this card (which was in place while making all the necessary settings to the Wago and Omron units) it just won’t connect. Remove it and it connects like it should. As far as I know the power supply card has no I/O addresses or other communication functions whatsoever, so I can’t get my head around it. Even stranger is that when instead of it I add an analog input card, with bus power connections build in, it connects without a problem. The .eds file only contains info about the main Wago unit, after installing it I should be able to add any kind of I/O card and address them in the Omron software. Also, the supply card is added and visible as a fifth card in the Wago I/O settings and the I/O status led is green during this error. Therefore I would say the problem is at the Omron side. Any sugestions?   Thanks in advance Andy - The Netherlands  
  8. Hi,  I am writing some routines to decode the data from my Input: data array to User-defined Array Parameters. Is that possible to have a generic routine to decode data coming from more than one module? I have two Module ENode and ENode_1. I have defined User-Defined parameters for the module. Can I make a generic routine to decode the data coming from these two modules and put them in the defined arrays?  the two arrays ENodeData[0] and ENodeData[1] have the Generic User-Defined parameters.
  9. Hi, Is that possible to define INT data type in EDS file so the Tags for the module in RS Logix Designer would receive INT data type in Input Tags not SINT? As marked in the image, the Logix Designer is receiving data as SINT but I want to have INT data type. Thanks Muhammad Azeem
  10. Hello,  As the title indicates, we have a micrologix 1400 that has been installed for a long time.  Recently it faulted out on 71h and was in Remote Mode.  Do these PLCs revert to Remote Mode when in a fault condition?  We placed it back in Run Mode and everything worked fine, but how did it get to Remote Mode in the first place? Thanks,  J 
  11. I have a "paddle wheel" style flow meter that I am trying to wire to my Micrologix 1400. It is a three wire device and there is a tag on it that says it can run at 6-36VDC. So, naturally, I thought to wire this to one of the HSC inputs of the Micrologix directly. I hooked the ( + ) on the meter to 24V, ( - ) on the meter to common, signal to the oscilloscope, and ground on the scope went to common. I see a small 60Hz sine wave @ like 5mv when the wheel is not turning. When the wheel is turning I get a small square wave but in the same mV range. It is not a nice smooth square wave either its all jumbled up with the 60Hz sine wave.  I hooked this thing up to a transmitter and scoped the signal and ( - ) in parallel with the wheel - I get a nice smooth square wave signal when the wheel turns. It is only at 4.5V though. My questions are? Why does't the paddle wheel give me what I am expecting directly? Also, what is the voltage range on the pulse that a micrologix will see? I am assuming that it will not count a wave with a 4.8V amplitude.... Thanks for your help in advanced! neech   
  12. Cimplicity 7,5

    Good Day There is a SCADA Cimplicity and controller Control logix 5561 AB. Communication between them is organized via Ethernet IP. It is necessary to transfer some tags from the Cimplicity to the controller Control Logix. How to do it better? Through Rslinx DDE OPC or write scripts in the Cimplicity? 
  13. 1.Can anyone say how can i communicate control logix plc with ethernet to serial converter. here i am not having any eds file.
  14. I have been tasked with pointing our FT View application to a remote SQL server for all data logging.  I'm having some issues getting this to happen.  I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance.  There must be a setting I'm missing.   For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times.   Any direction would be appreciated.
  15. Could someone please generate PDF report for the ACD files on the attached .ZIP file? They are all RSLogix 5000 v20 files, I needed them for a university report which the deadline is today, but I don't have access to a computer with RSLogix 5000 :S Thanks!  ACD_files.zip
  16. Has anybody tried communicating Allen Bradley 5069 Compact logix PLC with Red Lion HMI ?  I am unable to communicate them in spite of adding AB tags via L5K file which gives me no error. I am able to see all the tags in Crimsion 3.0 software in development mode.  However, PLC & HMI are not communicating with each other. I am able to ping to both, using the same program in PLC of which I generated L5K file.  I think it may have something to do with the driver as 5069 is a new line of PLC Rockwell come out with only in 2016.   
  17. AnyViz is probably the easiest way to monitor, operate and analyze your PLC remotely, thanks to the cloud from any location. No need of additional hardware or software licenses. More info at www.anyviz.de Functions: Real-time process data visualization with just a few clicks Record and analyze machine data easily Targeted Condition Monitoring Remote control - from anywhere in the world Connecting machines, beyond location boundaries Access with any modern browser and any kind of device like notebook or smartphone Have a look at our YouTube Channel to see AnyViz in action.
  18. Hello.  This is my first post and I hope someone has a solution. I have a program calculating Gal/sec adding to a running total and have up to the end.  Using REAL I can accumulate up to 16,777,216 (2^24) and using DINT up to 2,147,483,648 (2^31), but I need to have my registers continue past these limits.  I've read through many topics here and have tried the Rockwell Knowledge Base but can't seem to find a solution that truly works.  I have gone so far as to transfer the DINT to a string, cut the string into pieces and reassemble them in an Odometer type concatenation. If anyone has a suggestion, I would appreciate it.  I know I'm not the only one with this problem. PS & BTW - I'm using Studio 5000 v24 with a 1769 L33ER
  19. Thanks for your time.  We have purchased from auction a Getinge Autoclave (sterilizer) with Allen-Bradley controls (CompactLogix L32E).  The machine has a PanelView Plus 1000 installed.  A CD came with the machine w/ the following files.. HMI Project - (.apa file) Runtime (.mer file) Their is also a compact flash card installed in the CompactLogix L32E.  On the Panel View, their is an external Compact Flash slot, but no card, and on the inside of the panel view (if i remove the back cover) their is a compact flash card slot with a card installed.  I haven't checked what is on either of those cards yet.. We cannot get the program to load on the panel view. When the machine is powered on, the panel view goes through a quick dos setup screen and then the screen turns blue and we are stuck with an hour glass icon.  The icon will move depending upon where you touch on the screen.  I can boot the panel view in safe mode (by hitting the default button, then reset) at which point I get a message stating that the machines files may be corrupted and leaves me the options to Download new Firmware, or Continue.  Hitting Continue nothing happens, and choosing Download gives me Ethernet, or Serial options.  The Panel View is connected to the PLC via ethernet so I choose this option and it  gets stuck at this point. We do not want to make any changes to the program, but just to get it to run on the machine.  We do not have ANY of the software. Any advise is greatly appreciated. Craig
  20. Hi, Could someone explain or direct me to better understand the RS Logix 5 comparison tool? I'm comparing multiple PLC codes and having a little bit of trouble understanding what the concept of "deletion", "insertion" etc are portraying. Since, some rungs are labelled 'deleted' and 'inserted' in the comparison, however,  the rung labelled deleted seems to exist in the actual code?
  21. Help with CC - Link IE Field

    Hi Im working with an iQ-R CPU wich controls 6 conveyors with a CC-Link IE Field Network, the CC-Link module is a RJ71EN71. Each conveyor has a remote I/O (NZ2GF2B1-16TE Digital outputs main module with a NZ2EX2B1-16D extension for Digital Inputs). The communication in the CC - Link IE Field diagnostic appears to be OK, but I can´t send or receive IO signals from the Batch Monitor of Gx Works 3. Thanks for your attention!
  22. Hi, I'm a long time lurker and would like to start by saying thanks for all the help over the years, much appreciated!  This is my first post, please be gentle. I'm working through a large project with an L83 (V28) including 75 EIP nodes & 5 servos.  We have a need for quick real-time response of 2 cameras during a quick servo move (taking several pictures).  I've broken my program up into a few event driven tasks (allowing me to chose the execution time interval (5 to 8 ms for more important tasks and 20 ms for less important tasks, etc.)), along with these I have 2 periodic tasks: 1 for my HMIs & faults running every 30ms and 1 for this quick real-time response camera situation running at .5ms which contains my camera and servo logic.  Everything is running well and seems responsive and repeatable enough, but I am now adding the second half of the logic which will essentially double everything (2 up system).  This has made me consider the best structure approach: Is it better to have a few larger routines within a few larger tasks or better to have more smaller tasks containing an abundance of smaller routines or some other different mix? Thanks, JD43    
  23. Hello,  I have a Mitsubishi Q02U PLC connected through its serial port to a GS2107 hmi located on the same control panel. I need to add an additional GS2107 exactly the same as the first one at a distance of 80 meters from the control panel. How can I communicate with this new HMI ? Is there a special module to add to my configuration? I really dont know? Please advice. Thanks
  24. Step7 on remote server

    Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
  25. Hello guys, Newbie on this site. I am looking for a run time free Allen Bradley .NET driver. Basically a library (.dll) that implements communication protocols to Allen Bradley PLC's ( CIP, Ethernet/IP, etc.). Can someone point me in the right direction please ?.