Search the Community

Showing results for tags 'communication driver'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 235 results

  1. Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
  2. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
  3. Delta plc Communication Issue

    Dear allI have DVP14SS211R series Delta PLC Which is having 24V DC supply voltage. I am using PLC as master and My end device as slave. My slave device set device_iD=1I am using Modbus RTU protocol for Function code1baud rate =9600parity =noneStop bit=1data length=8I would like to know how to send request with Function code 1(Read coil Register). i have attached code reference. Communication block it wont give error it shows 0 .means No error
  4. Hey Everyone,   My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong.    I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through.  I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on.   Thanks in advance.
  5. Error Indicator on FX3U-ENET-ADP

    Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a wireless router and then i am planning of connecting to the ethernet module using GXWorks 2 on my laptop through wireless router. On the ethernet module, the error indicator LED is on (red). From the FX3U-ENET-ADP, it means that there might be setting or hardware errors.  I am asking if i have missed some steps on the installation process and if any of you have experience with similar problems. Thanks in advance for the answers.
  6. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  7. Check serial connection to Omron PLC

    Hello, I am building an application in CitectSCADA and I want to communicate with an Omron Sysmac CS1G. The connection between the plc and the Citect computer is through an ethernet to serial adapter (the computer doesn't have com ports on board). I'm having some difficulty establishing the communication and I want to make sure that I can actually reach the plc. Is there a way to check that the computer can reach the plc over the serial connection without using CX programmer? Maybe using Hyper Terminal, Putty or something similar. Thank you, Liron
  8. InTouch Comms

    Hi Everyone, I've just installed InTouch V10 and am trying to develop communication with Emulate5000, for educational purposes. I looked over the internet and found some videos on how to develop communications by setting up the topic name and node name in DA Server manager, but the issue I'm facing is that my SMC only shows logViewer and nothing else (snapshot attached). Am I missing some vital component or dirver? Or is there some problem with my installation? Help would be much appreciated.   P.S: Window Maker and Viewer are working fine. Thanks, Sabih
  9. hello expert i want ask some help So i tried to communicate my Omron PLC (cj2m cpu31) with SCADA from Schneider (power logic) on my omron side the comunnication on PLC already take to communication to NB so i add communication module CJ1W-SCU41-v1 I want asking how to open the communication if i want the scada become a master and my plc become slave i got this from omron website is that program compete for my case? i need configuration for scu41 module also to communicate or if you have suggestion i really open i just need to open port RS232c from scu41 so scada can read the data from my plc  tahnkyou for your help MRTU_CPU_Slave.zip
  10. Siprotec Relay 7sj62

    I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
  11. Hello, i want to connect my PC to the PLC(RSLogix5561)  over TCP/IP. In rslinx the Ethernet driver are configured. My PLC IP Adresse is 192.168.1.100 and my PC Adresse is 192.168.1.105. From my PC i can successfully ping the PLC IP Adresse, but from the PLC i can't see my PC. And it does'nt schow in RSlinx. Is there anything i am missing?
  12. Hello there, I am new to OMRON so need some help to communicate two PLC over FINS.   Here are the description of the system... (IO Table image is attached)   PLC1-  CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2-  CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX)     Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210.   I have tried RECV and ECHRD blocks but didn't succeed yet.   Two CPU are connected over ethernet via a industrial switch.   Can you help me to achieve data transmission please...
  13. HMI and PLC Communication problem

    hi there. .. i am new to plc programming.. Right now i am having problem related to communication between hmi and plc.. i have HMI WEintek 6070ip and plc mitsubishi FX2n.. i have written a program in gx developer . and communicate it with EASY Builder for HMI. so for now plc is communicating with my program written for hmi on pc. but when i downlaod to hmi and connect plc cable to hmi then hmi shows no plc communication. i am having a problem for communication between hmi and plc. any help will be a life saver. thanks in advance
  14. Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage.  These are the configuration in the PT and the PLC. The communication is through RS232 Serial.  I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B??   THANKS...  
  15. Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
  16. Hi All, Hope you all doing well in this pandemic life.  I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly.  Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr    
  17. Hello guys, I am very new at this. I am trying to make a Schneider PLC (TM251MESE) to send some serial commands (485)  to a integrated stepper motor from Automation Direct (STR-MTRD-17030RE, but I am lost. The driver has been program to receive the SCL commands. But not quite sure how to send those from the plc. Im using SoMachine V 4.2 Have any of you done anything similar? Any example will be greatly appreciated.  Thanks 
  18. INFO

    Dear sir, I am working in container terminal, we have Siemens plc  s7-300 , Bromma spreader with SCS-3( codesys software) spreader field device sensor (ifm) connected to slave ifm CR9011, now a days we are facing too much issues in scs-3 so we planned for isolate the SCS-3 but we want to know ifm module Cr9011 how to communicate to Siemens plc  7 how to write in hardware configuration. can you please suggest us.  
  19. How can I determine if both my Produced and Consumed tags are communicating with each other, and if have the right set of tags since I forgot how I named them?  Is there a way to confirm that both my P & C are communicating.
  20. I wish to print from a Panelview Plus 7 1500 to a Konica Minolta 'bizhub' 4402P. The printer is not on the same network as the machine but is reachable through a router to the corporate network. I already have this working on one machine but don't know how we succeeded in setting it up. The setup that works is: Manufacturer: Hewlett-Packard (it's actually a Konica Minolta 4402P). Model: Color LaserJet 3800. Port  10.xx.xx.xx (the WAN address of the printer). Driver: wt5hpspd.dll (v52.1070) We never had a Color LaserJet 3800 but we may have had a black and white HP laser printer that worked with this driver and now works with the Konica when our IT department replaced it. When using Add Printer the system tries to connect with the specified IP address and fails (even though we can ping it) and then the drive installation stops. Does anyone know a way to force the installation so I can try to replicate the working setup?  
  21. I have IPC and need to detect status of IPC and PLC communication . I need help with the same that how can in detect it ? Is it possible with message instruction ? if it is then how ?
  22. Can anyone help me with the issue in the picture? We have the correct version in place yet it gives me a version error stating it needs the version that is installed. Doc1.docx
  23. CP1L-EL TCP/IP with VideoJet Printer

    Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
  24. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  25. Hi All, Am trying to communicate and make In-Sight bar code reader to trigger through MicroLogix 1100 with RSLogix 500.  Does any have any info as to the steps to follow. Most of the info I saw and have tried were for SLC processor In fact, I created the String file ST10:0  for the target device as was mentioned in one of the posts but when I complied it there was error saying that St10:0 was not supported by the module. Please see attached file. Any insight will be appreciated