Search the Community

Showing results for tags 'client server connection'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 97 results

  1. I recently purchased the SIEMENS CONNECTION KIT (6ES6400-1PC00-0AA0) with its corresponding serial cable to connect to a MICROMASTER 440. I connect my RS232-USB cable to the serial cable. But I can not connect in any way! What do I do wrong? 1. In the micromaster 440 I put the following USS configuration parameters (USS = serial communication):    p2010 = 6    p2011 = 0    p2012 = 2    p2013 = 127 2. I put the DIP of the Connection Kit (Ref. 6ES6400-1PC00-0AA0)  1 ON, 2 OFF, as indicated in the manual.    I connect the connection kit module with its serial cable to my RS232-USB cable. And I connect the USB to my PC. 3. Open "Set PG / PC interface" and select PC COM-Port.USS.1 4. I go to the properties and I am selected COM1 without problems. 5. But I do the transmission speed test and can not find anything. 6. Also in the diagnosis of PC COM-Port.USS.1 I do the test and can not find anything. Supposedly my RS232 cable is correct (I have tried several tests). And the configuration of the COM port in "device manager" also looks correct. What am I doing wrong?? Zhanks!
  2. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  3. ab

    The HMI server in area 'RNA://$Local/Spring_Insertion' refused to load it's project. The HMI server is not licened and cannot open a project with more than 5 displays
  4. Profibus Function Blocks for Q2ASCPU for Melsec ST Lite RIO inter-connection. Please assist in advising the attainment of such blocks - if any existing. Thanks
  5. Hi all, I will be starting on my MSc in automation in a couple of days so for that reason i have obtained a S7-1200 series 1211AC/DC/RLY PLC. This is a new area for me as i have been working in offshore since i graduated from my BSc a couple of years ago. I watched some Youtube tutorials on how the programming is done and i am ready to try it out for myself, but i have encountered a little problem.   Problem: I am using the X1 P1 PROFINET (LAN) port as a connection to my PC, this turns the Green Link light on and the Rx/Tx lights blinks orange. Now to the problem, i cannot connect to the PLC through the TIA portal, no matter what settings and connection types i use in the PG/PC interface box. I have had no luck finding leturature adressing how to configure the PC/software and get a connection to the PLC. Do any of you have a PDF or link which can help me through this problem?  Hardware: S7-1200 series 1211AC/DC/RLY 6ES7 211-BE40-0XB0 S C-J5PN 1614 2017 FS:05 Software: TIA Portal Version 13 STEP 7 Professional V13 WinCC Basic V13   Thanks   Best regards   Dennis    
  6. Hi all, I have a S7-1200 CPU 1214 DC DC DC and Cm 1241 6ES7241-1AH32-0XB0 communication module.I'm using TIA Portal 14 and i connected cpu but i couldn't connect cm 1241 communication module.When i looked diagnostic i saw" Diagnostics data are not available because the current online configuration data differ from the offline configuration data.".Then i looked for what was the difference.But i didn't see.Are there anyone can help me? Thank you
  7. Hello All,   I am would like to know how to send a bit from an excel file to an omron PLC through CX-server in order to confirm that I have communication and the excel file is open.   At the moment I am reading data from the PLC on the Excel file no problem but I don't know how to do it on the other way.   I am attaching the code I have written and the excel file. So the idea is having a cell with a 1 and reading this value as a bit ON on the PLC.   Thank you very much in advance I really  appreciate it. :)    
  8. Hello All,   I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file.   I am attaching the pictures of the messages and the code where debug send me.   Thank you very much in advance
  9. Version 2.0.2

    792 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  10. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  11. Is CP1H with Ethernet option board (CP1W-CIF41) is capable to communicate More than one client? If yes what settings I need to be Done?  
  12. I have been tasked with pointing our FT View application to a remote SQL server for all data logging.  I'm having some issues getting this to happen.  I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance.  There must be a setting I'm missing.   For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times.   Any direction would be appreciated.
  13. Dear all I am new please help me to find out how i can do electrical connection plus control of softstarter ATS48C48Q Schneider brand.I am using this softstarter for 200kw motor heavy duty.i need control this motor beacuse it is taking high torque at starting time.
  14. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  15. In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  
  16. Hi, I was wondering if there is a way to limit the number of allowed on-line connections at a time to a PLC? Like can you somehow set in the PLC parameters that only 1 'connection' can be on-line in the device at a time? Thanks Edit: I'm referring to connections from the TIA portal - not HMI / ethernet connections and so forth
  17. TIA Portal v13 - GOT1000

    Hello! Is there a driver GOT1000 for tia portal v13. I would like to do scada for GOT1000 GT14 using the Tia Portal v13. There is a possibility at all?
  18. I have an application in the Visu+ Scada System, from Phoenix Contact, which makes a query in the SQL Server 2014 database. While the database was empty, queries were made perfectly, after 4 months the database grew up absurdly and then stopped running the query, returning the following error: Query timeout exceeded. I have a general table with 210 variables being written every 20 seconds. The query is made by updating the parameters in another single row table, it generates a trigger that copies the requested query to a third table and it is plotted on a chart in the supervisory system. The error occurs when Visu+ sends the parameters to be updated in the second table, returning "Query timeout exceeded.". However, when I update directly through SQL Server, it updates, generates the trigger and performs the requested query. Could someone help me solve this timeout problem, please? Thank you very much in advance!!
  19. Step7 on remote server

    Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
  20. GE IFIX Server Client connectiom

    I want to make a setup of one Ifix 5.5 server and  one Ifix  5.5 client for testing purpose.  This is for doing some alarms and events testing at the client( Operator Workstation) end. My question is that is it possible to do this setup without a valid license. Is it possible to establish the connection between server and client without license..? Regards Eby
  21. q04udeh&qj71c24n-r4

    Hello everyone. i use q04udeh cpu and     rs-485 qj71c24n-r4 communication module. I  try to receive information from external device(2000amp power supply). im not a professional plc guy. On that moment i get MSG_RECV_String[7],  and store them in separate buffer from K1B108 to K1B120. i skip one because i do not need that k4B100 , and start from k1B108. I want to show value Voltsx10, but i need some help to do it. when i change value i see numbers from each separate MOV block function, but i can not convert them to decimal.(or i do not know how to do it). When i try BIN command i have error message 4100. Thank you for any suggestions.    
  22. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  23. FX2N-4AD

    Dear Friends; Today i am stuck and do not understand how i fix the following issue? 1. We have PH controller from Hannah Model HI 8711T , PH transmitter HI 8614L and PH probe. On the terminal blocks of the controller there are  4-20mA (Isolated).  2. We have FX 2N-4AD analogue module to read the PH value on the HMI. 3. First i connect the 4-20 mA as follows Short the V+and I+ terminals and connected it to the -ve of the controller 4-20mA terminal. I- connect withe the -ve of 24 VDC. and +24 applied to the +ve of controller 4-20mA terminal. But the reading not read by the controller. Then i change the wiring as follows Short the V+and I+ terminals and connected it to the +ve of the controller 4-20mA terminal. I- terminal connected to the -ve of the controller 4-20 mA terminal. By this the reading is shown perfectly. But the issue is after 10 to 15 second all the values that is on the LCD of controller , transmitter and on HMI fluctuate. Even i connect and disconnet the shield on the Module side but the issue is not fixed. How i fix it, and guide me how i wire up properly FX2N-4AD with 4-20 mA isolated output of the controller?   Thanking you, I will remain 
  24. View File Modbus Master/Client for HMI/SCADA  Overview: The Modbus Master or Client provides an easy and reliable way to connect Modbus Ethernet or serial Protocol Compliant devices with applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports all Schneider Electric (modicon) PLC’s and all other devices which use Modbus as a protocol. Open to support future models for this series of PLCs. Features Modbus/TCP Client or serial Master for communication with Modbus Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) Supports all Schneider Electric (Modicon) PLC’s or any other device which use any flavor of Modbus. Supports DANIELS/ENRON Modbus extensions. Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. Performance –500mhz Pentium–10 words: 15msecs–100 words: 35msecs (avg) Full implementation of Class 0 and Class 1 Modbus functions as well as a subset of the most commonly used Class 2 functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers: Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  25. Hi guys, I have tried almost everything and ran out of option on how can I successfully connect modicon m34020 processor using mini USB with unity pro, I am working in Windows 10 and selected everything possibly correct I can, like setting address to USB, and "SYS" in Set parameters, I have USBplc driver installed and it shows, "disconnected" and local and remote id emptly fields. In my device manager, I can see a question mark on the processor driver "BMX CPU" and when I try to update/upgrade/fix it it simply goes to nothing. While the Unity Pro shows the error "this isn't the right address or the plc is too busy or off". Please advise, if i am missing something. thanks in advance.