Search the Community
Showing results for tags 'cj2m cp1w-cif02 no-protocol rs232'.
Found 209 results
-
I made an Ethernet connection between an NX1P2 and a CJ2M using network configurator and I already have a real-time data input and output connection in the memory of both plcs. I need to send a 20-byte word and when the NX1P2 is modified in the CJ2M using Sysmac Studio, it receives that string of bits, decompresses each bit to be able to activate the NX1P2 outputs.
-
Is it possible to connect an old Beijer E300 terminal to a Mitsubishi FX5U base unit via a serial interface (RS422 or RS485)? And which protocols do I need to select?
-
Olá pessoal. Tenho um CJ2M e CP1H em rede. Preciso trocar informações entre eles. Alguém poderia me ajudar. CJ2M é 192.168.250.1 CP1H é 192.168.250.2 Tentei via NetConfigurator, mas não reconhece o CP1H. Obrigado.
-
Lately I have been having a struggle importing tags into JMobile from a CJ2M CPU31, I can enter tags directly and it works OK, but when I try to import tags nothing works, there are the yellow triangles on all the widgets. I tried to import using the "normal" Ethernet protocol by first making a .CXR file from the global symbol list, it seems to create the dictionary, and I can update the taglist and the tags appear to have the correct datatype and address, but no joy. I also tried the EthernetIP protocol by making a cjf file, funny thing is that worked for a while, but stopped communicating after a while. I have successfully used the EthernetIP import on another CJ2M/Exor eSmart. Any way of troubleshooting this, adding 50+ tags by hand is not very tempting :( Geir
-
Hallo my name is Danu, i have a CP1E wirh CP1W-CIF11 and connect to modbus RTU device, i have done with write single coil, write single register, read single register and read multiple register. But i try to write multiple register, the indicator of CP1W-CIF11 is off and if i check d memory its no data. I attached my cx programmer. Can you help me create write multiple register in cx programmer? Thank you AD4402-modbus edit edit edit edit edit.cxp
-
Hello. What is the best option using TCP/UDP communication to use CP1L-EM40 as SLAVE / IO Expansion? For MASTER I’m using CJ2M-CPU31. Since now I’ve used FINS _CPU010_SendData and _CPU011_ReceiveData function blocks. The problem is, that I’m communicating with 6 slave IO units and to read/write all 6 units it takes up to 1 – 2 seconds. I’ve tried Ethernet/IP protocol but CP1L units doesn’t support this protocol. Is there some kind of different TCP/UDP protocol which is faster than FINS? In older days you could use PC Link but this protocol is for RS232 / RS485 comm. I know I could use CP1W-EIP61 but I don't have this adapter and I can't afford to buy one Thanks.
-
Hello. Is there some kind of FUNCTION BLOCK to PING IP Device? Thanks. BR, Andrej.
-
Read/Write value of Omron memory area using Ethernet/IP (EIP) protocol
JayPrakashTiwari posted a topic in CX-One
Hello Everyone, I have a Omron CJ2M PLC, and I have configured the Ethernet/IP port of this PLC to communicate over ethernet connection. I want to read/write the DM, HR memory areas of Omron PLC (CJ2M) using eip protocol communication. Is there any protocol specification which explains the telegram structure to be sent over ethernet to be able to read/write the values in omron plc over EIP? I want to know the command structure which can be sent to PLC and PLC will respond with the proper response. -
I see on the forum there are a couple of mentions of netbiter and they seem positive, ive just got one and do not understand how the messaging works. I have tried creating a template just to read D0, i believe i have setup all my IP settings correctly but i am not certain, they are on the same address range for sure. If anyone has used this before and could point me in the right direction that would be great
-
I have an application where I'm using GOT2000 to read data from the weighing unit using RS232 and I send this value to Omron CJ2M through Ethernet/IP. Some variables from that PLC are connected to the elements of the HMI. The problem is when writing the weight value to the PLC through script or Data Transfer is disabled, the RS232 reading works fine, it's fast, etc. However, when I enable the script which writes data to the PLC, the RS232 slows down by a lot, like it refreshes every 2-3 seconds. If i set the script to execute like every 1-2 seconds, it is working better (still slower compared to when the script is disabled) but I cannot leave it like this, because the weight is used to control some valves, pumps, etc. Enabling script doesn't slow down normal communication with PLC, because I tried to test it by displaying the value of seconds from PLC on the HMI and it refreshes every second. Does anyone have idea why such tiny script causes so many problems with RS232?
-
I'm trying to exchange some data between two controllers. I've used a manual which describes Tag Datalink communication. Everything works fine on the Bradley side, which means I can read values from Omron without problems. However, on the CJ it isn't working. In the Network Configurator I get error every 10 sec (Tag data ling error, code 03D5) and cannot read any data from AB. When I open Connection Structure Tree I see that the input tagset from AB has 'Broken path (0000000000000)' and Unknown Device right next to IP address. I've tried using EDS from the Rockwell as well as uploading it from AB PLC directly - I don't know if it might be EDS issue. The only thing I noticed that inside CJ2M-EIP21 EDS it says that Ethernet/IP is Class 1 connection, however in the 1769-L35E EDS Ethernet/IP is Class 2 connection. Have anyone ever had such a problem?
-
Hello fellow tinkerers, Inside our company we're expanding our IoT network with the replacement of CJ1G-H to CJ2M CPU units. When swapping models we are downloading the Datamemories back into the CPU. Our engineer warned us to not download all the DM memories: only up to D20000, so I did. When starting we had some inputs that weren't showing in the Data trace: and noticed that it were pulses shorter than 8ms. We found out the "Unit settings" were back to default and this is not unusual since we only downloaded range D0-D20000 but I'd like to avoid this in the future and look up what each datamemory means. I know D30000 to D31599 are the memories for the CPU bus unit settings (manual W473 section 4-5) but what range is the "unit settings" within these 1600 datamemories? I can't seem to find it in any manual I look into (W473, W472).. Also do you see any problems with downloading the full datamemory range? Kind regards!
-
Hi All, I connected the controller CS351 to QJ71C24N Module, RS232 setting with non protocol, and got the reading with reception and framing error. Could some one help on the data seem floating in data memory? QJ71C24N_Reading Data.mp4
-
Micro800 ASCII ABL error code 7 issue
Awloescher posted a topic in Allen Bradley / Rockwell Automation
Hi all,I'm completely new to ASCII and trying to figure out where I'm going wrong here.Application: I need to send 2d barcode data to a KGK Jet model CCS3000L Inkjet printer. Only protocol possibility is ASCII. PLC I have is a Micro850, and the only port option for ASCII is the serial port. I modified one end of a 2707-NC11 cable to connect PLC TxD to printer RxD, PLC RxD to Printer TxD, and PLC SG to Printer SG. I jumpered CTS and RTS at the printer connector, and the 2707 cable I'm using doesn't have wires on the Micro850 CTS or RTS pins.Printer company verified that I can just jumper RTS and CTS on their side and not connect their DTR and DSR pins (since I'm not using hardware handshaking). I don't really need any flow control for the application ( I don't think...again, ASCII noob here).Do the CTS and RTS on the PLC side need to be jumpered? Does the DCD pin need to be jumpered or connected to something if I'm not using handshaking?I downloaded the Micro800 ASCII read and write functions and function blocks from Rockwell library, and they seem to be working, except that I keep getting ABL error id "7". This error states, "Cannot complete ASCII send or receive because channel configuration has been shut down using the channel configuration dialog box." I have the serial port enabled and configured to ASCII, no handshaking, baud 9600 same as printer, no parity check, 1 stop bit, character length of 8.Any help in pointing out what I'm doing wrong or things to try would be greatly appreciated! ASCII_TEST.ccwsln -
Hi, I'm trying to use send and receive function. I have to send 2 words from cpu CJ2M CPU33 to CJ1M CPU13. I use enthernet network. I saw a strange thing that if I just use send function then my data goes to second plc without having a receive function. Its that right? I didn't mentioned wich port because I'm not sure wich is. I left for automatic allocation.
-
hi i am tryning to make a program that takes 4-20ma signals from a pressure sensor and converting it to show ML on a hmi screan. im using a CP1L with a CP1W-Ad041. but i cant figurout how to set up the setings in cx programer correctly. any tips?
-
I am developing an application which will communicate with an Atlas-Copco torque controller and will be using Open protocol over Ethernet. I am looking for a simulator that I could use to test my software against while we are waiting for delivery of the actual controller. I was sent an application by the controller sales rep but it turned out to be an application that needs to communicate with a torque controller. Any ideas ?
-
Hi, I have a CP1L and CP1E Omron PLC, and I try to make communication between my PLCs and my system (raspberry pi with Linux OS) using Node-red and specifically using the OMRON-FINS node ( https://flows.nodered.org/node/node-red-contrib-omron-fins) and more detail ( https://github.com/ptrks/node-omron-fins ). So I’m looking for a module to create an Ethernet port for my PLCs. ( both PLCs have RS232 port) . Can you please guide me to find a compatible RS232 to Ethernet module for my PLCs? Thank you
-
Hello, I have noticed that a frequent product here is the I-7561U. I'd like to know your reviews. What are you using it for?
-
Hi.. I have problem with protocol macro for 4 Ports. I currently use 2 CJ1W-SCU31 (Total 4 Ports) to read from 40 Power Meters, each port consists of 10 power meters. The problem is that each port can't read the power meter at the same time. PLC can read the power meter if only one of the ports is activated. Can 2 CJ1W-SCU31 (Total 4 Ports) read data from the power meter simultaneously with 4 ports? Thanks...
-
Hi everyone, I am having a problem with a CJ2M-CPU33: when finishing the online edits, it never asks me to store the changed symbols and/or program comments, so they are not updated in the PLC memory and cannot be uploaded later. First time this thing happened to me, I am connecting to dozens of CJ in this factory and it's the first time I've encountered this problems in 16 years.
-
I am probably over looking something simple but I am stuck. I need to count how many containers come down a conveyor and display it in Indusoft Web Studio 2020. I am using a CJ2M to count from a sensor doing an binary incremental long word (++L) Using long word as the count will need to go into the thousands. (not 100% if this is the correct way). My problem is after 99 the value sent to indusoft is not a number but letters or signs. I am sure their is a simple solution but I have given my self a headache and need a little guidance please.
-
hi i am wrting an essay about my final project , i created a scada for omron plc (CJ2M) in factory . ( i am a computer data student ) the thing is , i can't find a good and an easy documentation ( not the CJ2M datasheet ) to talk about the CJ2M component (port and stuff like that) any help please ?
-
Hello, I've been using Mitsubishi and Omron systems separately (in their own environment), and I am fairly new when it comes to connecting these two brands together(plc and hmi). I've been scouring the net for wiring diagrams for the cable connections and also the parameters to be set for a successful communication between those two components. can anyone point me at the right direction as everything I've tried so far has been a failed attempt of making these two communicate. here are the parts and my current settings if this helps: FX3U-64M FX3U-232-BD NB5Q-TW00B or better yet, is there a proper cable that I need to buy for this to work?
-
Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.
