Search the Community
Showing results for tags 'cj2m cp1w-cif02 no-protocol rs232'.
Found 209 results
-
I have omron plc CJ2M CPU15 and I have input module CJ1W-MD261 (32 inputs, 32 outputs) and I was wondering can I MD261 module for hsc inputs? When I open CX programmer and go to settings and go to "IO Module" I see that I can include HSC input and I assigned it to Input 08 and what is that input? Is that input 0.08 on MD261 because my plc has no integrated inputs or outputs (image included at the bottom). Any help is wellcome
-
Beckhoff CX5020-0120-M310 can't read data from Siemens 1SI RS232 on ET 200s
deividasn posted a topic in Other PLCs
Hi i have Beckhoff (CX5020-0120-M310) (profibus master) with TC3.1 and want communicate with Siemens Profibus ET 200S (IM151) DPV1. All modules works on ET200s except 1SI RS232 (6ES7138-4DF01-0AB0). When i triggered Barcode scaner i have one bit ON on no more data from 1SI module. on Array (0..15) of words 0.#0000000000000000 1.#0000000000000001 <= this bit is ON after trigered pushbutton on scaner 2.#0000000000000000 3.#0000000000000000 ..#0000000000000000 ..#0000000000000000 15#0000000000000000 This Same ET200S with this same configuration i have tested with Siemens S7-300 and it works, i can read data from Barcode scanner on the 0..31 array of byte (no WORD's like on CX5020) Siemens have On Communication => ET200s serial interface => Function block S_RCV i use them and i can communicate with 1SI RS232 via this block. But Twincat 3,1 don't have this block. On ET200s i have: 1. 1SI(rs232) module (rs232 parameter is : Data - 8bit, Stop - 1 bit, Parity - NONE, Data Flow - NONE, Interface type RS232-C ) 2 DO modul 3 RTD modul 4. DI 5. RO modul Any ideas where are problem? why can't read data from 1SI RS232? -
Hi! I would like to know how I could send information throw serial RS232 communication. I mean, I have CJ1M-CPU11 connected with ID232 and OC201 modules, and I have an optic sensor (digital input). When the sensor turn on, I would like to be able to read the information (on/off) with an application like Putty (I have the PLC connected by RS232) to develop an application and show the information on another framework. I don't know if I have explained very well. Thank you!
-
Trouble with getting online and uploading program from Compactlogix L31
darwil93 posted a topic in Allen Bradley / Rockwell Automation
I'm wanting to get upload the program from a CompactLogix L31 Controller. I'm using a generic (non Allen Bradley) "C2G brand" usb -->rs232 cable coming directly off of my laptop because I don't have a serial port out. The rs232 side of the C2G cable is a "pin out" or male end, and as you can see in the picture, the serial port at Channel 1 on the controller is also male. I'm using a generic (non-Allen Bradley) null modem (female-->female) cable to complete the connection. Ultimately, I'm not seeing the controller on linx. But that's a result of me not being able to configure the driver. When I try to auto configure this driver, Linx gives me an error saying, "Unable to verify settings due to a NAK!" btw, the rs232 cable going into channel 0 is for the HMI on the machine. A pv600 1. How do I get online and upload the program from the controller? 2. What does NAK mean? -
HI , Thanks a lot for the reply & help on previous topic. Now i setting up a new system with 2x CJ2M CPU13 and 2x SCU32 and the connection via 1000M RS485 cable. May i know the best communication to use for the serial communications? Regards, TJ SHARON.
-
Hi, I can’t find an answer to the following and I was advised to ask it here.I’m programming an Omron CJ2M with an MD212 high speed I/O card. I usually do all my programming in Structured text, simply because I like it a lot over ladder or sft.Now, if I want to read the hight speed counter (incremental encoder), I have to make a ladder section and use the PRV instruction to store the present value in a chosen location.The manual says the current PV is stored in A271, but I can’t get a readout there. Apparently the only way to read it is through this instruction.Does anyone know if there is an equivalent to the PRV instruction for Structured text? or another way perhaps? Again, when I check the actual memory adress, there’s no value there withouth the use of the PRV instr.
-
Hi, I am trying to set up a remote IO exercise using CJ2M-CPU31/CJ1W-DRM21-> GRT1-DRT with little success. Started with setting up Comms, making Routing table, downloading Routing table, Connecting to DeviceNet in lower left window in CX-Integrator, Devicenet appears in the project and DRM in the right window. From then anything I try to do with the DRM responds with communication error. I got no NS leds, E2 in the DRM and flashing TS on the GRT. I have done the same thing with a CS1 and a CJ1M-CPU11-ETN with almost no problems. Only difference being that with CJ2M I had to start Integrator first, same results with Ethernet, Ethernet FINS/TCP and Direct online USB. The DRMs/DRTs are donated second hand units, so might have some inherited settings? Any suggestions? Geir Update: Actually had two problems, one of the IO-slices in the GRT was faulty and blocked communication. CX-Integrator only seem to work with CJ2M in Auto online USB or USB (Toolbus). Geir
-
Hi. I am new for omron , I want to use CJ2M CPU 34 + CJ1W-SCU32 connect to E5CC temperature controller with RS-485 , I'm no sure it will work or not. Is it possible or not? The manual E5CC No details for SCU32 Sorry I'm not good english. Thank you.
-
Hi to all, I have two queries about CJ2M-CPU13. 1) Can i use the in built serial port (RS232C) to the GUI or HMI? 2) Can i use the in built serial port (RS232C) to connect two CJ2M-CPU13s? I have only limited experience and knowledge in the PLC. I would like to see a step by step instruction video or tutorial notes. If any of you any information pls share and help me. Appreciate all help and thanks.
-
Greetings, My application is utilizing two Omron CP1L PLCs connected through an RS232 serial link to achieve PC Link. We're essentially using this setup to message data between the two PLCs. With a hard-wired link, it works great. I can force bits in the master PLC, and see them in the slave PLC. However our application requires this link to be wireless. We got our hands on two SENA Parani SD1000 units. I've worked with these units previously to connect a serial scanner to a Rockwell PLC quite successfully. After reading through datasheets, we figured out the pin-out from Serial Comms unit fitted to the CP1Ls wasn't quite standard. So we adapted our own cables to re-route VCC and SG appropriately. So with a hard-wired link, this setup works, and the comms units on the PLCs have a nice solid lit up comms light. But with the wireless parani connection, the comms light lights up, but it is very dull compared to the wired link, and we get no data transfer. I've verified to the best of my understanding that the comm settings all match, at 9600 Baud, 8 data bits, 1 stop bit, and Even parity. Just curious if anyone has any suggestions to get this working, or if there are any settings that I might have missed that make PC Link a unique form of RS232 that these parani units can't handle? I've identified online alternative units known as the Promi SD205-OA, which has a pin-out to match the OMRON CP1L PLCs. As far as I can tell though, the units themselves function the same as the Parani SD1000 besides this pin out. Anyone know differently? Presently the serial connections made are Tx -> Rx, Rx -> Tx, Vcc -> Vcc, and SG -> SG. Would I require anymore connections? Our wired link seems to work just fine with just those connections. Any help would be greatly Appreciated!!
-
Hi all, I would like to ask you about the name and manual of the command protocol for PLC Siemens. I am not asking about communication protocols, I am asking about the protocol of the commands to use some features of the PLC without TIA Portal. In a similar way, OMRON is using the protocols FINS and Hostlink, or Mitsubishi is using MELSEC commands. Thank you very much.
-
I would like to capture current date and time to registers in the PLC. I would prefer to use a function block, if possible, since I need to do the capture at different places in the program. I am using a CJ2M. How can I do it?
-
Dear Expert, i'm issue to do communication CP1E with PC via RS232. im try to use plc for sending information and receive by hyperterminal pc. after googling some information there have multiway to success. by the way until now cannot settle. please expert share completed setup that's work: 1. communication cable from PLC - PC (my information use pin (2,3,9 jumper 4&5) - (2,3,5 jumper 7&8) 2. sample program that works (im using TXD & RXD with memory D1000 to keep data) 3. connection cable to PC using MOXA Serial to USB converter. 4. plc serial setting (default: 9600,7,N,1,Host link) my target to give instruction to printer to start print. printer need ACSII code. if this communication success i'm will convert all data to ACSII by ACSII convert function. thanks,
-
Hi everyone, I'm trying to connect a computer to a SLC 5/04 via the RS232 interface without success. The same module has been running and connecting/programming via the round DH+ connector just fine. So when I start it up now, I can put it into run mode, DH+ LED blinking. The problem is I can't establish the RS232 connection, first time ever I work with a PLC... I've used two different computers with RSLinx and RSLogix500 installed, one with a proper COM port, one with a USB adapter. When I define a new driver in RSLinx the Auto-Configure gives the error message in the attached picture. I'm using a standard COM port cable plus a F/F gender switcher. Both checked with a multimeter, no twisting or switching of contacts going on. One problem is I don't even know if the RS232 LED is supposed to be active as soon the cable connects the PLC and the computer, or only if there is an active data transfer. So I don't know if the actual connection is at fault, or if I'm doing something wrong in the software. Any tip would be greatly appreciated! Volker
-
Hello everyone, I need help for the titled matter. The problem is that i am using CX programmer v 6.1 trial version 30 days. The error i am getting is PLC failed to connect. so the cable in attachment is right one? It is CN226 USB to Peripheral port cable. DIP switches are all off. Should in set them in on off state? if yes so whats the sequence? Replies will be highly appreciated Thanks
-
Hello I have a cj2m processor and md211 module and I want to read position from rotary encoders who are put on the stepper motors. I use high speed counters to count the number of(I made settings like in documentation) but every time I read velocity. In first two picture I have 3 blocks for PRV function , I set port specifier [#0, #1 and #3] because on this ports I command 3 axis. Please help me!
-
WireShark capture of PC <-> Omron NJ via CIP protocol
zbyszek54 posted a topic in NJ Series / Sysmac Studio
Hello Everyone, I am studying the overview of the CIP Message Communications in Omron's "NJ/NX-series CPU Unit Built-in EtehrNEt/IP Port User's Manual" but not all is clear for me. Could anyone suport me with the WireShark's capture of the PC <-> Omron NJ CIP communication session ? I'd like to see in 'real' world the CIP packets used to read/write of Omron's NJ Global variables. Thanks in advance Zbyszek -
Hello! I wrote a ladder program where I use PRV function for reading current position from rotary encoder. My issue is I received data on PRV only when Oringin_Search is on, I want to read value without Origin_Search active. I tried with High speed counter but I don't receive values. I used port's 0,1, 3 because I have three servomotors with encoders. I have CJ2M CPU and MD211 Module.
-
Hello, I want to make an application to control a heater element . I have a thermocouple(k) , I read value from it with ad04u module and with od212 module I want to control the heater element with PWM. Now that's my problem , I don't know how to configure in cx-programmer to put on output from od212 pwm signal. I read in documentation about Pwm but is a poor explication about this problem. (I use CJ2M processor). What else conditions must to check for I can work with pwm signal?
-
Hi everyone, I need some help and ideas. PLC Type: CJ2M In my system, I have to track 3 palettes with sensors. A palette is defined by 3 bits. Then I need to identify the route the palettes have entered, learn this route, and recognize the color and workmanship we've produced. After all, I have to play back the process. How can I solve to store the bits of identified palettes and read back these bits later. I attached the palette turth. Thank you for your help.
-
Hello, Just asking a question. It is possible to communicate two plc ( CJ2M ) using cx integrator.? It is possible to exchange data between the two of them? Thank you,
-
Hi all, I have a micrologix 1400 plc and an SIC E10 engraving machine. the engraver requires its marking info ( day/year/random sequential number etc) to be sent to it via rs232 connection. the manuals have nearly melted my brain and I have no clue how to convert and send this type of info via rs232. please help. thanks NOTPROTOE10V6US-R04.pdf
-
Communication L35E Ethernet and RS232
wrager69 posted a topic in Allen Bradley / Rockwell Automation
I was wondering if I can use the ethernet and the rs232 interface at the same time with two different devices. A computer with RSLinx on the ethernet and and Arduino RS232 on the RS232 with DF1? -
Hi, I write app to smartphone to communication omron CJ1m and Android. I want to connect devices by standard bluetooth. I plug in bluetooth adapter directly to omron RS232. I want to ask you, how i can connect by FINS command. Bluetooth device baud rate is set 9600. If i connect to omron, i sent code: "AC01" and i sent how long as omron return me "AC01" ?? And what's next command i sent? If I want read CIO 10 i sent: "0101B000000A" ? and FCS and "*" ?? how i calculate FSC? Is it XOR my data sent?
-
We are upgrading our A900 GOTs (finally) and I'm looking into updating our key switches to rfid readers. Does anyone know of a good rs232 rfid reader to pair with a GS2107 GOT Simple? Also if anyone has had luck with scripting for security levels and could post a sample (be it GOT1000/2000) it would be awesome sauce.
