Search the Community

Showing results for tags 'cc-link/'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 51 results

  1. CC-Link IE + C#

    We have a controller written in C# and need to integrate a servo.  We are looking at the Mitsubishi servo MR-J4 line.  Unfortunately it doesn't support Modbus TCP but does have the CC-Link IE protocol.  Does anybody know if it is possible to talk to CC-Link IE via C#?   I'm having a helluva time trying to find an answer.  I see some thing about Seamless Message Protocol (SLMP) and CC-Link but the info is somewhat sporadic.  Any advice is much appreciated as I've never worked with the Mitsubishi product line (but interested in their PLCs).
  2. Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form.   http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
  3. RS232 ascii to CC-Link

    Hey all, im looking for some way to convert ASCII msg from rfid reader send through rs232 to CC-Link, I've found AJ65 from mitsu and some converter from Anybus, but I would like something much smaller...   changing readers for some CC-link compatible is most likely out of question (unless reader will be cheaper than converter), because they are legacy HW with hundreds of them instaled   Thank you
  4. Hallo. I want to know if its possible to write to eeprom of an A800E inverter via cc-link ie. I have successfully written and read any parameter to the ram. But now i need some parameters to be stored in the eeprom. Im using the A8NCE card on the inverter. The manual only states a bit to write speed and torque to eeprom, but nothing on any other parameters.
  5. Hallo. Im hoping someone can shed some light on these topics. The company im working for have been using gx developer iec 7.04 for ages. The setup we have been using is QxUDE plc with beijer HMI and FR-E700 inverters on profibus. Recently(finally) we have been forced to start using gx works 2 because of newer plcs. With new software come new questions as always. And since im feeling we have been hanging in old software for too long. I want to make sure we are up to date this time. The setup we plan on using is QxUDV cpu, CC-link ie (QJ71GF11-T2), FR-A800 inverters and GOT 2000 for HMI I have made a few project in siemens and TIA portal. And software wise it has always annoyed me, that mitsubishi lacked the same integrated software package as siemens. This made me discover navigator. With system labels navigator makes the variable control, hardware setup and project overview im missing from siemens possible. My question to navigator is. Does people use this? i dont see much about it on the forum? is it already outdated? Gx works 2 or 3 Again i cant figure out what is new and what is old. What are the pros and con for choosing either? CC-link ie or CC-link From internet reading. I find that IE is the newest and faster CC-link version? Is the classic CC-link on the way out? If not why should i choose IE over classic? When setting up CC-link IE in navigator i dont get the same hardware in the catalog as CC-link. To setup inverters i need to user general intelligent device station. Whereas in cc-link i can choose FR-inverters. Is this the way it works? or can hardware catalogs be updated somehow? Blocks for FR-A800 Maybe its just me. but i really think the search function on the mitsubishi download page is crap. When i filter QPLC i get LPLC etc. ive been trying to find some blocks to control inverters without luck. Do i start creating it myself or can you point me in the right direction? I know these are a lot of mixes questions. But i feel we have been non-efficient for years because of bad software choices. Hope someone can shed some light one these points.
  6. Hello. There is a controller FX5U-32MP in the presence, the inscription "CC-Link IE Field Basic" and the Inverter (FR-A840-00170-E2-60) near the connector, the inscription "CC-Link IE Field Basic" on the front panel. I set up both devices according to the instructions. It turns out to read the state of the inverter (state, frequency). And I can not manage from the controller. Already all the settings that could have changed. Can you scribble what is wrong? p.s. Sorry for the bad english.
  7. How to allocate memory in rcpu to link datas of FXcpu . through CC link configuration
  8. CJ1M-CPU12 Host Link Protocol(FINS)

    Hi all,I tried connect to CJ1M-CPU12 with Host Link Protocol from PC.I sended(without spaces)  "@00FA F 00000000 0101 82 0038 0A +FCS *Cr" through peripheral port for read Dm area.But PLC didn't answer.I tried again with 19200 7E2,9600 7E2,115200 8E1.But  result is same no answer.DIP switches on the PLC are are ON all of them.I read W342-E1-14 CS_CJ_CP+HostLink FINS ReferenceManual.But I didn't solve this problem.Finally hooked Rs232 Port and sended same code with 19200 7E2.PLC sended to me "@00???".Is peripheral port settings wrong?If it is not what's wrong? Thank you 
  9. Rx3i to Balluff IO Master

    Wanting to write to Balluff Smart Lights via IO Link Master IP #BNI EIP-502-105-Z015.  I can find lots of literature on setting up the communication via E/IP in RSLogix 5000 but haven't located anything with Machine edition for writing the data over IP.  I am utilizing an Rx3i platform with IC695CPU315 and IC695ETM001 for network access
  10. Help with CC - Link IE Field

    Hi Im working with an iQ-R CPU wich controls 6 conveyors with a CC-Link IE Field Network, the CC-Link module is a RJ71EN71. Each conveyor has a remote I/O (NZ2GF2B1-16TE Digital outputs main module with a NZ2EX2B1-16D extension for Digital Inputs). The communication in the CC - Link IE Field diagnostic appears to be OK, but I can´t send or receive IO signals from the Batch Monitor of Gx Works 3. Thanks for your attention!
  11. FX5 CC-Link IEF Basic

    hello. I have developed project with 3 FX3U PLCs with ENET modules for communicating between them, and one of fx3u connected by profibus with 2 fx2n-32DP-IF I/O station (developed just hardware). This project still wait when customer accept it. I'm exactly sure that it will work perfectly. But now i think about exchange old and expensive fx3u to fx5u. I search for best solution for this task on fx5. I have a doubt with I/O station. Each remote station consist of 32 inputs,16 outputs, 8 AI. So i considered as a solution CC-Link IE Basic because no need buy additional modules. Did someone use fx5 CC-Link IEF Basic? As i understand ie field basic configurations like simple rs485 cc-link with occupied station, not like full ie field. FX5U can be the master of CC-link IEF basic with embedded ethernet with 6 slaves station and can be local station with FX5-CCLIEF module. But i not sure that i can use fx5 with NZ2 CC-Link IE Field Remote I/O. I have a doubt with configuration this station, because in CC-link IEF i can add this station and see how many rx/ry rww/rwr points i need, but for CC-link IEF basic configuration i can add just CC-link IEF basic module and choose number of occupied station. Slave 1) NZ2GFCE3-32D + NZ2EX2S1-16T (32/16) and  NZ2GF2BN-60AD4 + NZ2EX2B-60AD4  (8 AI). Slave 2) NZ2GFCE3-32D + NZ2EX2S1-16T (32/16) and  NZ2GF2BN-60AD4 + NZ2EX2B-60AD4  (8 AI). So can it work if not what device can be used with CC-link IEF basic? What benefits can give cc link ie field basic network than ethernet socket connection via UDP between 3 fx5 plcs? Or easier way using ST lite series and try to connect via modbus tcp.(as i understand fx5 provide p502 and modbus tcp)  
  12. Mitsubishi CC link

    Hello every one. can any one explane me maximum how many CC link card we can configure in one  QJ61BT11N module. and whwt is difference between CC link and Input/Output card
  13. CC-link no digital output

    Hello, I have set up a new CC-link to add I/O to our existing factory PLC (Q03 series CPU). The CC-link system comprises of a master station (QJ61BT11N) and a remote device station (STlite STL-BT1) with several DI, DO and AD modules. Parameters are as per the STlite quick start guide example except no. of occupied stations is 3. In PLC Parameter I/O assignment the master station is a intelligent type and occupies 128 points from 0D00. Digital/analogue inputs are being read in the CPU and there are no error lights on either the master/remote stations. However digital output commands are not registered at the remote device station (LED lights on the module show which DO is active). Any help is greatly appreciated, I'm new to this and I've been hitting my head against a wall for a while on this one now. Cheers
  14. io-link integration

    I recently purchased a s7-1200 starter kit, a sm 1278 io-link modula and a io link linear sensor from turck. Un until now everything is installed and the sensor is cofigurated. Now the queastion is how do i get the value from the sensor into a tag in a datablock? As you can see in picture tia4 I started to fil in the device block but I could'nt figue everything out. (I am failry new to tia portal) With kind regards Dominique Hautekeete
  15. I am adding a remote device to an existing cc-link network. The master station is an A1SJ61BT11 and the CPU is A2USHCPU-S1. The CC-Link network currently has 20 remote I/O stations and I am adding a remote device. The A1SJ61BT11 has parameters written to its internal memory. In order to add my new remote device, I think I need to only change two parameters: First, I need to change parameter address H1 from 20 to 21 since my device will be the 21st. Second, I need to change station information parameter address H34 from 277 to 4373 to enter it as remote device. I looked at the example in IB(NA)-66721-J(0310)MEE, section 6.3. In the example, they are setting up the parameters for the first time. However, I am only changing two of the parameters. I followed the example except I only entered rungs to change the parameters for H1 and H34. My question: If I run the parameter setting program to only enter parameters for H1 and H34, will it affect the other parameters the original programmer entered? Could they go back to default? Any advice? Thanks in advance
  16. Here is a link to a blog post that will use Excel VBA to communicate to the Omron Host Link. It program NETComm.ocx for the serial driver. Here is pat of the blog... In Part 1, we used VB6 to communicate from the computer to the PLC. We will now use Visual Basic for Applications (VBA) to accomplish the same task. NETComm will be the serial driver and Excel will be the program that we will use. Using Excel we will have access to the Excel Object Model so we can utilize worksheets, ranges etc. Please refer to Part 1 (How to Implement the Omron PLC Host Link Protocol) for the details of the wiring of the serial port and protocol sequence. Continue to the blog post... Thought that I would share. Let me know if you have any questions. Thank you, Garry
  17. Dear All I have some problem with CC Link IE module QJ71QF11-T2 Link to NZ2GF2B1-16D and NZ2GF2B1-16T the problem is I can not read/write to remote I/O at X1000/Y1100. please help me Thank in advance Thanya
  18. http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ OmronHL.zip Here is some software and website that will show you how to implement the Omron Host Link Protocol. The sample was written in VB6 and will read the first 10 DM registers. Let me know what you think. Regards, Garry
  19. Hi, First time posting on here, but been a reader for a while. I have an issue with a Mitsubishi setup and I really need to resolve this ASAP. The system is based around a hot standby CPU (Q12PRH) on 6 slot backplates with a CC Link (QJ61BT11N) and Modbus (QJ71MB91). Connected to these racks is an ST Lite CC Link head station (STL-BT1) with 10 output cards (DO8) and 14 input cards (DI8). The CC Link has been set up in GX Works 2 and I don't have any ERR lights. What I do have, and don't want, is a flashing I/O LED on the ST Lite head which I have been reliably informed means the device hasn't been initialised. I have tried to do this using the X78, X79, Y78 and Y79 commands as the ST Lite head is set to occupy 4 slots, device ID is set to 1. Due to the Q CPU being a hot standby GXW 2 will not let me specify the start IO numbers, which would typically be x1000, y1000 based on their examples. I have therefore assumed it is starting at X0 and Y0, hence the X78, X79, Y78 and Y79 bits for setting the station. I have also tried using X1078, X1079, Y1078 and Y1079 as in the examples assuming it had auto addressed the start at 1000 and not 0000. Any help will be appreciated, Cheers.
  20. q series plc, cc link communication

    I want to communicate between two cc link master module placed in two separate panels. could any one please tell me the instruction used?
  21. CLKSS 1.0

    Version CLKSS 1.0

    292 downloads

    Controller Link Software for Controller Link PCAT Board. Runs in DOS
  22. [Utilities] - CLKSS 1.0

    File Name: CLKSS 1.0 File Submitter: Jay Anthony File Submitted: 20 Nov 2014 File Category: Utilities Controller Link Software for Controller Link PCAT Board. Runs in DOS Click here to download this file
  23. Trying to add points to a QLC link from WDPF to SLC5/04, incorporating a 1770-KF2 DH+ interface module. This link has been in place for years, incorporating only DCS reads (both digital and analog). We recently added several more DCS reads successfully, but cannot seem to get digital or analog DCS writes to be seen by the registers in the SLC5/04 data table. Could this be a limitation by the 1770-KF2 module, or is there a more probable reason? SLC5/04 DH+---------1770-KF2---------QLC Could Duplex settings on the 1770-KF2 module have a bearing on this dysfunction? Successful DCS analog reads PT101, N9:2, A0000 PT102, N9:3, A0002 DP103, N9:4, A0004 Unsuccessful DCS analog writes PV101, N9:18, A0500 PV102, N9:19, A0502 PV103, N9:20, A0504 Any insight would be greatly appreciated. Thanks.
  24. Combine 2 Machines with CC-Link

    I would like to combine two existing machines with CC-Link. Each machine has a QJ61BT11N set up as its Master Station. The larger machine has 26 remote I/O and 4 remote devices. The smaller machine has 1 remote device (see the attachment). Each are already programmed and running. The larger machine has HMIs that I would like add screens to in order to control the smaller machine as well. The smaller machine would basically just need to send and receive a handful of signals... start, stop, manual, origin, e-stop, fire specific outputs, etc. What would be the best way(s) or simplest way(s) to connect and communicate between these machines? I am open to any advice and ideas. Thank you Machine_Addition_Via_CCLINK.bmp
  25. HMI on CC-link network

    Hello, can someone recommend HMI's which can be connected to my cc-link network? or is it better to use a PLC on the cc-link network and attach the HMI to the PLC? I just find the GT16 very expensive and I believe they need CC-link IE? Thanks you.