Search the Community

Showing results for tags 'c programming nb designer'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 207 results

  1. Error Compiled

    klutut posted a topic in CX-Designer

    Sir, i can't compile my file that i have made. It say " The compiled file is not found. Please compile the title first". So, because of that i can't do offline simulator on NB Designer
  2. Hi  I want to use in sysmac the number of the active page in nb designer. for example if I am in page number 5, the program in sysmac recovers in a variable the value 5 THANKS
  3. Hello everybody, I continued my project this morning and my HMI gives the 'PLC No response 00-02-3" error... I haven't changed anything since last Friday, so in theory it should work. I used this tutorial a few weeks ago and that worked. I also tried so use some old programs which used to work, but they don't work now...  HMI IP: 192.168.250.1 (the addresses from the tutorial) PLC IP: 192.168.250.2 (the addresses from the tutorial)   Does anyone know what could be the problem? I already tried using another switch, but that didn't work either. EDIT: I just saw that I posted this in the wrong subforum, excuse me EDIT2: I found the solution. I cleared the data memory before... So what I did was transfering the settings to the PLC, then completely power off the PLC and then power it on again. That worked for me! Thanks, Olivier

  4. setting date cp1l

    Bobodopalus posted a topic in CX-Programmer

    Hi all im currently using the DATE instruction to set the PLC's date and time via the HMI which is an NB7W which i have working but i am currently setting each byte of the words being used in DATE by using numerical inputs in NB designer and entering integer and decimal to set these bits in DATE and its a bit ugly to say the least. is there a way on nb designer to only modify bytes or am i going to have to used full words on nb designer and use MOVD in cx programmer to assign them to their correct byte CURRENT SETUP always on DATE using d50=d53  

  5. Keypad in GT Designer

    Rector posted a topic in Mitsubishi

    I need a key pad which can be used for numeric input, can anyone provide any sample program.   Thank you.
  6. My Compact Logix PLC is connected to my computer by USB. When I try to create a new view designer file, I can not connect my view designer with my controller. "OK" button of the HMI to controller path remains INACTIVE. Please see the attached.  How can i solve this issue?
  7. Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
  8. Hello Friends,This video guide you about the programming of Schneider Altivar 312 VFD using SoMove software. From this video you can learn about1. Using SoMove software to program the Altivar 312 series VFD.2. To control the induction motor using control terminals of ATV312.3. To control the induction motor using the SoMove software control panel.4. To monitor the status of motor speed and thermal state on SoMove software.5. To export the graph of parameters recorded using SoMove software.https://www.youtube.com/watch?v=GgUKymi3uwAPlease support my channel by LIKE and SUBSCRIBE to continue these tutorial.ThanksSana ur Rahman

  9. String shift register

    Bobodopalus posted a topic in CX-Programmer

    Hello all thanks to bits n bytes's date and time to string converter here https://forums.mrplc.com/index.php?/topic/31786-write-plc-time-as-text-to-memory-card/#comment-149418 i have made a nice string output function block for the PLC date and time that i will attach. I'm now wandering how to shift this into a memory card as well as display it on a NB screen. for the NB screen i think i can just used a text box to display the code using 8 words, i sadly dont have a CJ2M plc with me at the moment so i cannot test. for the memory card i have not used these at all yet, is there a special shift register for strings? i cant seem to find it. i will be using this simply for a checklist on the HMI where an operator goes through the list of tasks to perform and ticks them off on the HMI which then logs the time and date they were completed at. do i need to create a shift register using MOV$ with a @destination and increase the count of the destination witch each input? Thanks in advance Date_and_time_string_convert.cxf
  10. This is my first post so let me know if there is anything wrong with my post. I am learning Studio 5000 right now for an internship and created a simple project involving a pushbutton and some LEDs. Now I am trying to create an HMI for it in View Designer. My problem now is that I cannot establish a connection to the project because I do not have a physical HMI connected to my plc (Logix 5380). I can't find any way to emulate an HMI module so that I can get it to run. When I emulate my HMI project it tells me "Unable to reach controller TEST" where test is the name of my plc program. I added a module that matched the model in my HMI program (panelview 5510 2715p-t7wd) which I arbitrarily picked at random. But when I go into references and try to add HMI to Controller Path it does not show up (I'm assuming it's because it is faulting in the plc program since it doesn't actually exist). Is there not a way to emulate an HMI or add a virtual HMI to my studio 5000 program that I could connect to from View Designer?
  11. HI everyone i was wondering if i could connect a cp1l-el to 2 different NB screens running 2 different programs. we have a main line HMI which displays the health of the entire line with its own cj2m plc, we also have a machine which is part of the line that has its own plc(CP1l-EL) and HMI. is it possible for me to include the cp1l in the main lines HMI so that it can display the status of that machine? or will it cause issues because it already has a program attached to it. i dont know exactly how the NB program works does it just read the bits of data it needs to or is it constantly looking at the whole plc data list?
  12. Hello, I am new to automation and I do a project with a Micro850 Plc. I am more comfortable with logic block so I write my program in Function Block langage on Connected Component Workbench software version 12. I would like to make flashing a light but I don't know wich block to use and how to program it ... Could you help me. Thank you
  13. Hello, can we do the simulation between sysmac and nb designer thanks
  14. I have one project on which the offline test works nicely. However if I "Save as" and give it another name, the offline test stops working. I click on offline test, the loading hourglass appears for a few seconds, then nothing happens... Does anyone know why, and/or how to get offline test working again? I am running NB Designer version 1.3. I always compile before trying the offline test.
  15. Hello,  Sorry I'm newbie with omron plc programming. I'm wondering how can i simulate plc program on sysmac studio with Hmi on Nb designer without hardware. because I want testing my program and my plc and hmi connection before buying hardware. Thanks in advance !

  16. Omron PrograMming console

    KongFah posted a topic in Omron

    Dear sir, my Omron plc output relay broken.i need to move this output to another output relay.then,i need to modify the program.how i edit the broken output number to another output number by using programming console??? Thanks Kong Fah.

  17. NB designer editing names through HMI

    Bobodopalus posted a topic in HMI & SCADA

    HI all i was wondering if it might be possible to edit the name of a word switches state. I'm creating blank presets for a machine lets say 1-10, i would like to use the drop down word switch which would display preset 1-10. is it then possible to edit preset 1's name to something like "8mm diameter" by using the notepad function on nb designer and directing that to some location on the plc? any idea or different methods would be great, or even if its not possible. thanks

  18. FINS Communication with C++

    dangegatterhill posted a topic in Omron

    Hi, I'm having a little trouble connecting to a PLC from my program. I thought my previous post a few months ago fixed it, but apparently it did not do much. Here is my code: And here is the resulting reply from the PLC after converting it to hexadecimal So far, I've narrowed it down to the issue that my program is sending 64 instead of the 18 that was specified by the FINS command. I assume that the received error is due to the fact that the PLC did not receive the correct instructions from my program. The "End" is not sent by the PLC, it is a personal note for me to know where the received message ends. My goal is to simply receive signals from D00 to D68. I imagine that the received string should be in the form of: 00 C0 00 02 01 01 00 01 00 00 01 01 [Response Code] [Data] Can someone help point out where I can start looking for why my program is sending 64 instead of 18? I do think I am messing up something simple here, but I'm not sure where to start. EDIT: To clarify the models, I am connecting over Ethernet to an Omron CP1L-M40EDT with CP1W-CIF41 Thank you in advance!
  19. Hello everyone, As the title suggests I am trying to display on a GOT1000 the real time frequency that the inverter is running at. I have attached my CC-Link settings and the associated programming as well. I tried using the example program from Mitsubishi but I got lost. From my understanding I should be seeing the output frequency in W3C4 however, I am not receiving any data. Any help would be appreciated. 
  20. Hi. In GT Designer 3 i am using a template for motor control and status in a panel. Due to changes in control philosophy a button was added for STOP. This has been added and registered in the template. But how do I also update the objects? Should this have been done automatically if I had done it correctly? Cheers  

  21. GT Designer 3: Label import error

    Rolf_Inge posted a topic in Mitsubishi

    Hello. When trying to import the labels from GX3, i keep getting an error saying the project cannot be opened. Has anyone encountered this error? Cheers
  22. PLC programming languages are used to program the automation devices in the industrial field. The device connect through PLCs can perform certain tasks like moving products or sorting them. The 5 most popular PLC Programing languages nowadays are all part of International Electrotechnical Commission Section 61131-3 Standard. IEC Standard is a set of rules that standardize PLC languages. The PLC programming language can be divided into two section: text-based and graphical.   Text-based Languages: Instruction List (IL) Structured Text (ST) Graphical Languages: Ladder Logic Diagram (LLD) Sequential Function Charts (SFC) Function Block Diagram (FBD)   Five Popular PLC Programming Languages You Need to Know
  23. Hi guys, since this is a forum for people starting out with TIA Portal, I would like to share with you my course that I developed for the last 6 months.  This course uses a real-life sample application and translates it into a fully functional TIA Portal PLC application.  This course of 2,5 hours consists mainly of video explanations with practical programming assignments to put your newly gained knowledge straight to work.  As a controls engineer, I have over 10 years of hands-on experience with TIA Portal ranging from software development, commissioning and troubleshooting. At the end of this course, you´ll be able to: Structure and program a real-life user application in TIA Portal Download and Troubleshoot a TIA PLC application Program function blocks (FB) using ladder logic Build global data structures using user-defined-data-types (UDT) and data blocks (DB) With the coupon link below, you can enrol for only $12.99 (might vary depending on the country you live in).  The course is normally $99.99, so you get an amazing all-round programming package for almost no money.  So go and check it out  Take me to the Course Now!      
  24. Did you always wanted to get started with Siemens TIA Portal programming, but you were never sure where to start or how to get the best performance out of the platform? Eager to upgrade your TIA skillset from an instructor with over 10 years of TIA experience in the field?   -> Then this course might be just for you! My course "Siemens TIA Portal - PLC Programming Basics" will take you through the steps of creating your very first TIA application - from structuring (very important!) and programming your application, to downloading and troubleshooting your application online.  The course is based on video lectures and is around 2.5 hours long, and consists of 40 lectures divided over 6 main chapters. The enrolment fee is offered at a huge discount at the moment, so take action while it lasts! Take me to the TIA Portal course, I´d like to check it out...   Thank you, and I hope to see you inside the course! Hans
  25. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.