Search the Community

Showing results for tags 'build is not complete'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 5 results

  1. Small and newly started Controls Company available to provide service in the following areas: Controls Design Panel Building PLC and HMI programming Commissioning Services 15+ years in controls and automation ranging from automotive to material handling.   Experienced with Rockwell and OMRON Can ship panels to anywhere in the world from Canada Will design and or build your panels to your specs and according to CEC and NEC regulations. Can commission your machines on site. www.ashtoncontrols.ca    
  2. Command Prompt Build

    Hey Guys. I'm starting also this topic for another important question I have. Is it possible to do a batch file that takes the software you stored on a server or TFS system and compile->Rebuild all in like command prompt or something? Has anybody tried anything similar to this?  If there are more than 1 programmers working on the same software that is centralized somewhere, I want the option that in the night the software is compiled and to have the feedback if 0 errors occurred or some errors occurred.   Thanks
  3. I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.  
  4. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  5. I am needing some help developing a string, and setting up communications that will be interpreted by a printer. I have thus developed my string, setup my com ports on my 1766 micrologix and setup com ports on my schmidt styliner scribing printer with win7e. Essentially this is plc to computer running software for a printer. the software has been setup to the best of my knowledge. My problem is creating a string that will be recognized as start/stop transmission at the printer. I have never done ascii so I am unfamiliar with how to get the two components talking. This is a simple application that only requires writing a string to the printer, but i have tried all that i can without any luck.