Search the Community

Showing results for tags 'bradley'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 174 results

  1. I want to use an incremental rotary encoder with my Allen Bradley PLC to move induction motor (3 Phase) in clockwise and anticlockwise direction.Please help me with the program how to use High Speed Counter Values to move motor reverse and forward.
  2. We've purchased an Autoclave at auction with CompactLogix L32e and PanelView Plus 1000.  With the help of some forum members and a local engineering company we have the machine finally working! I'm looking for some advise as to how to train users for standerd operation.  For example:  Their is a toggle switch on the front which powers on everything (PanelView, processer, switch, etc).  We close at 5pm each night.. Should we Power down the machine each night, or leave it on? Another user mentioned a battery and I was a bit confused with the manual. With the machine off, Is the PLC only holding the program because of the battery?? I have backups of the following.. (.acd, .apa, .mer) files.  I also have created a Disc Image of the Internal Flash card on the PanelView.  Is their anything else I should have a backup of? Their is a CF card in the PLC.  It has a folder called "Logix" and one called "System Volume Information"  In the Logix folder is  a CurrentApp folder with a .bin and .p5k file.  Does anyone know what exactly these are doing?? Any other advise is greatly appreciated.  Thanks so much for your time.
  3. Hi, I have encountered an unexpected "PRI" LED indication of 1756-RM Series B module. When the affected redundancy module is set to primary, the status of the "PRI" LED indicator is blinking red. On the other hand, it is set to a solid red when the RM is set as secondary. I have read the manual and there are only two expected behavior for the "PRI" LED indicator, green if it is set as the primary and off if it is secondary. Does someone encountered this scenario already?   P.S. The RM does not have any minor/major faults when accessed. The status indicator indicates "PRIM" when the affected module is set as primary and "SYNC" when set as secondary. Manual switchover between controllers are done and was successful. Thanks in advance! Regards, RIValencia
  4. Restore PLC communication to Panelview

    I had communication working between panelview and PLC by changing the IP of the panelview to same network as PLC. A maintenance tech removed the IO module with the machine running and we have now lost communication.  It gets stuck now loading the RsLogix symbols. After 5 min. It lets me continue, but I see ? Instalead of sensor values. when I go to terminal settings on panelview and set to dhcp, it loads the RsLogix symbols and the program, but I still get the ? Marks instead of values.. i also noticed the IO led on PLC is now off and am pretty sure it was on when all was working.. any advice?? Thanks for your time
  5. Find password from .mer or .apa

    We have a sterilizer w/ Allen Bradley controls which we bought at auction.  It has a panelview plus 1000.  It came with a CD containing .mer and .apa files.  I was able to load the .mer file via the configuration screen by using the external CF card.  When I run the application, their is a login button in the bottom right which when pushed brings up a user/password screen.  We do not know the user/password for this.  Is it possible to find the password by somehow reviewing the files.  We do not have any software, and do not want to make any changes to the program (rather than changing the password).  I've attached the files in case anyone can help. Also, was i correct to load the .mer file??  or should I be using the .apa?  I followed these instructions here. http://www.judiwa.com/2010/10/05/how-to-copy-panelview-plus-application-with-compact-flash-card/ Thanks for your time PA1525_PVP1000.mer PA1525_PVP1000.apa
  6. I need help regarding setting up modbus communication between Allen bradley micrologix 1400 and Schneider altivar312 vfd and rslinx for pc. I am totally stuck with it. 
  7. CJ2EIP to Compactlogix

    Does someone can help me. I try to make communication between omron CJ2M and CompactLogix 1769-L33ER. I found a document in this site to do the same with control logix but it doesnt work. The eds file does nt have the same parameters in Omron Network configurator. Does someone do this in this site ?   Thanks for the help
  8. Thanks for your time.  We have purchased from auction a Getinge Autoclave (sterilizer) with Allen-Bradley controls (CompactLogix L32E).  The machine has a PanelView Plus 1000 installed.  A CD came with the machine w/ the following files.. HMI Project - (.apa file) Runtime (.mer file) Their is also a compact flash card installed in the CompactLogix L32E.  On the Panel View, their is an external Compact Flash slot, but no card, and on the inside of the panel view (if i remove the back cover) their is a compact flash card slot with a card installed.  I haven't checked what is on either of those cards yet.. We cannot get the program to load on the panel view. When the machine is powered on, the panel view goes through a quick dos setup screen and then the screen turns blue and we are stuck with an hour glass icon.  The icon will move depending upon where you touch on the screen.  I can boot the panel view in safe mode (by hitting the default button, then reset) at which point I get a message stating that the machines files may be corrupted and leaves me the options to Download new Firmware, or Continue.  Hitting Continue nothing happens, and choosing Download gives me Ethernet, or Serial options.  The Panel View is connected to the PLC via ethernet so I choose this option and it  gets stuck at this point. We do not want to make any changes to the program, but just to get it to run on the machine.  We do not have ANY of the software. Any advise is greatly appreciated. Craig
  9. Serial communication of Micro830

    hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC.  there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com      
  10. Hello everyone, we have two damaged analog cards for CompactLogix PLC ( 1769-OF8C  & 1769-IF8) that we are going to replace. my experience is with Siemens and Schneider PLC's  but for Allen Bradley, not so much so my question is : are there any requirements or specification other than the part-number that could prevent the cards from going in service directly ? as for the firmware, series and so on ?  and do i need to do any extra work after replacing the card ? thank you Best Regards
  11. Hello,    I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results).  Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot )    Thanks in Advance 
  12. Hello,    I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results).  Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot )    Thanks in Advance 
  13. I have a c-more HMI and an Allen-Bradley 1200, is it possible to set them up with two AB 1764-NET-IAC+ to have my computer monitoring the PLC at the same time, I have established communication from my computer to the PLC through the IAC, but I haven’t been able to integrate the HMI, is it even possible?. This is been setup for training purposes, any help would be appreciated.
  14. Good afternoon fellow members,I once again ask for your help to know if any of you have struggled with similar issues. For the past year and a half, Every 1-2 months we seem to be losing communication with one of our PLC's/racks. We have in the rack a 1756-EN2T card (revision 3.006) that will flash as if it is communicating and status OK (green LED), yet we will be unable to ping it and our operator interfaces go into error. We could also not open the web browser page of the EN2T card, nor connect to the PLC/rack through RSLogix5000. As this happened over the weekend, the local electrician was called and he tried cycling power to the rack and there was no change after it came back on (not sure how long he left power off to the rack though). The problem seemed to be fixed after we told him to pull the EN2T card out of its slot and then re-insert it.We verified the CIP cinnections for this card and it is around 98 to 101 CIP connections out of a max of 248, so not too high. the card's CPU usage is 24-29%, so no indication of problems there. EN2T Card is set to auto-negociate, just like all the other cards we use at all of our plants. Has anyone ever experienced a similar problem?Thank you in advance for all your help and knowledge-sharing!
  15. i need help

    I need help programming an allen bradley 2711R-T7T touchscreen. I'm using a micro 850 PLC and I cant figure out how to use the momentary PB on the screen to make the light on the screen turn on. I can turn the light on with the PB that is on the panel door but not the one on the actual screen. Any tips or suggestions would be greatly appreciated.
  16. Hi, I'm a long time lurker and would like to start by saying thanks for all the help over the years, much appreciated!  This is my first post, please be gentle. I'm working through a large project with an L83 (V28) including 75 EIP nodes & 5 servos.  We have a need for quick real-time response of 2 cameras during a quick servo move (taking several pictures).  I've broken my program up into a few event driven tasks (allowing me to chose the execution time interval (5 to 8 ms for more important tasks and 20 ms for less important tasks, etc.)), along with these I have 2 periodic tasks: 1 for my HMIs & faults running every 30ms and 1 for this quick real-time response camera situation running at .5ms which contains my camera and servo logic.  Everything is running well and seems responsive and repeatable enough, but I am now adding the second half of the logic which will essentially double everything (2 up system).  This has made me consider the best structure approach: Is it better to have a few larger routines within a few larger tasks or better to have more smaller tasks containing an abundance of smaller routines or some other different mix? Thanks, JD43    
  17. Hello, I am hoping I can get some assistance configuring an Allen Bradley PanelView C600 (2711C-T6C). All a long I have been able to communicate with the HMI using Ethernet protocol, but after I switched communication settings to what my Professor recommended by using the Panelview software, the Ethernet connection seems to have stopped working. The HMI has now been reset to the factory settings (by pressing ctrl + shift during start up then selecting F1 when prompt appears asking if the user desires to return to factory condition of terminal). Once the terminal resets I am able to eventually get to the configuration screen. When in the communication settings Protocol says "*", Status says "Unavailable", I've changed the device name to "plc" and the Node Address says "0". When I click on the "Ethernet" option the IP mode says "DHCP" then the IP Address, Mask and Gateway all read "0.0.0.0". I get into CMD/DOS PROMPT on my laptop while the terminal is connected to my laptop via an Ethernet cable and type in "ipconfig" to see if my laptop is communicating with the terminal but it is not. The lights where the terminals are located are also not blinking. After plugging in several different Ethernet chords from the terminal to my laptop I am convinced the issue is not the cable. I've tried resetting the terminal several times as well and I'm having no luck. Can anyone assist me with regaining Ethernet communication with the terminal or some work-arounds? I see there is an option to use the USB but it looks like AB no longer provides the drivers on the website. If it helps, the manuals I am using are 2711C-UM001 and 2711C-QS001.
  18. Data logging format

    HI guys, does anyone here knows the data logging format for plc AB 1766? I had looked into manual but I cant find it,may be i'm miss look it.
  19. I am currently working on a fwd rev motor control routine, we have all of the circuit wired up and verified the physical circuit is working as intended when manually jumped. But will not turn the outputs on...  I triple checked my logic and it all seems right, all inputs are true all the way to the output on both the fwd and rev rungs. But still the outputs won't go true. if I toggle an output bit it does show up on the dc out card, I haven't tried forcing anything.  No errors or warnings, fuses are fine. our teacher does not help as much as we'd like and we have troubleshot just about everything we can think of with our experience.    Any input would be appreciated, thanks.
  20. Hello guys, Newbie on this site. I am looking for a run time free Allen Bradley .NET driver. Basically a library (.dll) that implements communication protocols to Allen Bradley PLC's ( CIP, Ethernet/IP, etc.). Can someone point me in the right direction please ?.
  21. L3 Serial Communication

    Hello,   I am looking for examples on using serial communication with a WMS inside Studio 5000.  Sample programs would be ideal. And I would like to get some information on what blocks need to be used. e.g. Send, and Receive   Thanks!
  22. Hi, I,m new to this PLC. I,m trying to set up 4-20ma signal on this controller but having no luck. I,m reading a level off a unit that sends out a 4- 20ma signal and i,m terminating in straight into my PLC but it doesn,t read at all on my ladder logic. I have set up 4-20 on analog properties . I have terminated it into 0in - and Iin - .Do i have to have 24V supply on CJC+? or am i missing something, any help??
  23. RsView Studio Tags problem !

    Hello everyone ! The plant where i work uses allen bradley CompactLogix 5000 controllers. It has three controllers, each one controlling a seperate production line. So my superior asked me to add a functionnality to the existing program, and after a little research, i found that it is better to edit the program in "Online Mode", and that's what i did. After that, i wanted to associate the new tags i created with some views in RsView Studio, but i cannot find any tags in the online folder associated to the controller, even though the connection shortcut is set and is working, and the online folders of the other two controllers contain all their tags ! Any suggestions please ?
  24. Programming Ideas for assembly

    Hello,  I am trying to program an assembly line for two kinds of product manufacturing. This products would be manufactured in a random sequence. I have 3 station in the assembly line and would like to know how to transfer data of product from one station to other station and reset the previous station. The manufacturing is high paced.  the sequence of manufacturing is as follows:  Part type 1 : The part is placed on station 1 and procedure is carried out on 2 and 3 and the part is taken out. This is the current process.  We would be adding one more variety of part.  Part type : It is scanned on the first station and an extra procedure is being carried on the third station.    I want to take the data from station 1 and carry it over to station 2 and 3 respectively. and reset the station as it passes that station.  Please let me know if you have any ideas. I have tried daisy chain programming but that might not work .
  25. Programming Ideas for assembly

    Hello,  I am trying to program an assembly line for two kinds of product manufacturing. This products would be manufactured in a random sequence. I have 3 station in the assembly line and would like to know how to transfer data of product from one station to other station and reset the previous station. The manufacturing is high paced.  the sequence of manufacturing is as follows:  Part type 1 : The part is placed on station 1 and procedure is carried out on 2 and 3 and the part is taken out. This is the current process.  We would be adding one more variety of part.  Part type : It is scanned on the first station and an extra procedure is being carried on the third station.    I want to take the data from station 1 and carry it over to station 2 and 3 respectively. and reset the station as it passes that station.  Please let me know if you have any ideas. I have tried daisy chain programming but that might not work .