Search the Community

Showing results for tags 'beckhoff integration raspberry'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 52 results

  1. Hi, I am looking for the smart PLC hardware which can easily communicate with the Internet through WIFI connection and has the capability to create the UART connection with 900hp-S3-Wireless Modem which receives the values from Battery Powered Wireless Sensors Network and integrate the values with cloud services
  2. I’m working on a project in twincat 3 from Beckhoff in which I made a Global variables list, a function block and a visualisation. When I call the FB in the program I made and add some of the Global variables to this FB, I can’t control them in any way. Nor in the visualisation, nor in my program itself. What do I have to do to make these Global variables work? 
  3. Hi,  I'm new to TwinCAT 2 and i'm upgrading a long time design (hence the TwinCAT 2 reference), to read a more sensitive torque signal.  I'm using a Beckhoff CX1030 as my PLC Controller.  I needed to add 'homing' to my motor sequence and confirmed with Maxon, im using the function blocks correctly and in the correct sequence to establish my 'absolute zero'/'home' position.  The motor has an output to write to:  ControlWord, which tells the motor that the position it is sitting in is '0.'  My program compiles, it runs, it writes each function block, but it's not seeming to get back to the test run opMode, even though i tell it to and the function block performs the 'Write' function.  it's stuck at zero and not reading an analog input signal from my torque sensor.  so im getting an artificial torque reading through every test.   i think this is related to my tare motion.  I start the program, home the motor, get into profile velocity mode, tare my sensor, enter profile position mode, go back to position 0, then back to profile velocity mode, run a test, sample data, go back to 'home' or '0.'  I wonder 1st, is my variable not linked properly through the system manager?  2nd, i set a boolean variable to set the 4th bit to 1 in my control word write (setting the 4th bit high will set my current position to absolute zero), but did i not connect the program to the main sequence properly?  looking to read a valid signal again and see that my motor moves back to 'home' each time.  Do i not need to home the motor after the tare, since the tare nulls out the torque value after the tare? after this i need to program my sample period, instead of it being fixed, as it is currently written and then use my home position as my trigger to start sampling.... Beckhoff applications department is overloaded, currently and can't help and this is all beyond the knowledge of the general support line.  I've gotten fairly far, on my own, but of course, the project is under a time crunch.   Does anyone know twincat well enough to help guide me?
  4. BC9000

    Hi all.... I have bc9000 plc and there are 2 problems I face,the first is when the power is off ,the downloaded program does not remain. the second is how to configure internal register with system manager.  
  5. UniPi Neuron

    Hello there Currently I'm planning to get into home automatization and buy some toys to tinker with (boiler control, lightning switching, shutter control etc.). And since I need some PLC for that, I searched the internet and aside from more known brands (Loxone, Railduino etc.) I found UniPi Neuron https://www.unipi.technology/hardware_documentation/technological-introduction-to-neuron-products-41 Their hardware looks good, but they have next to none reviews and I didn't found any references aside from those on their website (which I obviously take with a grain of salt).  So my question is - is there any user of the Neuron? I'd like to know opinions or user references or anything you would have to say about it. Thanks! 
  6. BeckHoff programming

    Hi to everyone, i'm a junior programmer. My boss told me that i have to study a new plc: BeckHoff. I ask you if somewhere there is a guide about this plc, and about ST language used in this plc. I tried to use the help function on TwinCAT 2, but it doesn't explain lot of things. Before that, i used to program with ladder language, so i don't know nothing about ST. I hope in one of your help. 
  7. AnyViz is probably the easiest way to monitor, operate and analyze your PLC remotely, thanks to the cloud from any location. No need of additional hardware or software licenses. More info at www.anyviz.de Functions: Real-time process data visualization with just a few clicks Record and analyze machine data easily Targeted Condition Monitoring Remote control - from anywhere in the world Connecting machines, beyond location boundaries Access with any modern browser and any kind of device like notebook or smartphone Have a look at our YouTube Channel to see AnyViz in action.
  8. Beckhoff Control panel testing?

    I am a technician at a large repair facility and we often have Beckhoff control panel displays come in for repair. I'm having trouble using Twincat to set up the buttons on a CPxx to test the buttons and assignable leds. We have a PC running windows XP with the twincat software, a CP9035 pci card to connect the CP to the pc, i can see the PC's display on the CP and also recognize the CP in twincat, just unsure how to map testable functions to the keys on the CP. Hope this all makes sense. Hopefully there is a Twincat guru out there that knows how to do this. Thank you!!
  9. TIA Portal v13 - GOT1000

    Hello! Is there a driver GOT1000 for tia portal v13. I would like to do scada for GOT1000 GT14 using the Tia Portal v13. There is a possibility at all?
  10. Help Programming a Beckhoff PLC

    I have a very simple problem that I need help with.  I have some programming experience but I am brand new to PLCs and structured text.  I am using TwinCat 3 to program a Beckhoff CX9020.  My goal is to read the temperature from my thermocouple and open or close a valve based on the temperature.  I have successfully connected the PLC to the TwinCat software and I am able to see the value of the thermocouple increase and decrease when I touch it with my fingers.  I need to link that value to a variable in my code so I can have the valve act on it.  I don't know how to properly address the inputs and outputs.  Thank you!
  11. ingineer

    hello. out there. I need som help. I never user Beckhoff Twincat before. but now I have a smal project on Twincat. after two days to undersatnd the Twincat . I still don't understand how to make configure hardware on twincat. som body can help me please or telle me where I can find the doc. thanks
  12. Hello, I am responsible for implementation of Vijeo Citect 7.4 SCADA in my company. I want to connect to Beckhoff PLCs by using Twincat OPC Server. I can control and observe the variables through OPC Control tool, but when I add the device and variables to my Citect aplication, they are always equal zero. I cannot also force through Citect to change the value. I don't know where the problem lies. If you need additional information, please ask me. I will provide you with all the data I have. Thank you in advance. beckhoff_opc.bmp
  13. Beckhoff BC9000 IO error

    Hello, I urgently need some help.  I have a Beckhoff BC9000 PLC which is controlling the lights etc. in my house.  Suddenly, overnight, the PLC isnot working anymore.  BC9000 unit looks like it is functioning, but none of the outputs are working.  I/O Error LED is flashing  8 times very rapidly (I think 8 times, too rapid difficult to count) and after that it blinks 4 times slowly, then stops blinking for some seconds.  According to Twincat PLC control, PLC is in Run mode, but on PLC the I/O run LED is not green.  When I push a light switch, I notice on the PLC that the input is received on the PLC, but according to Twincat PLC Control it is not.   My configuration is: - BC9000 - 7 x KL1408 input slots - 6 x KL2408 output slots - KL9010 end bus terminal   Tried already the following things: - Reboot (unplug/replug power) - reset and reload program on unit - replace KL9010 End bus terminal with another one - ...   Many thanks in advance for your ideas. Regards Fredje  
  14. Hello everybody, I'm new to Beckhoff and I couldn't find the solution yet, I hope someone can enlight me. I need to integrate two distinct and already functional systems: one is working with a Raspberry connected to other devices; the other one is a Bechoff unit getting sensors data. Now I need to get these data captured by the Beckhoff and send them to the Raspberry. Does someone know if I can access these sensors data in a Beckhoffs unit (it's a CX9020, but we can use a EK1100 as well...) by the Raspberry without using any other intermediate device (just the board and the unit)? Thank you!
  15. Hello all, I'm new to Beckhoff and running a PLC with EtherCAT I/O slaves. If one of the slaves is disconnected from the network (power loss or network cable broken) the whole PLC freezes, is there a way of configuring ethercat such that it remains (partially) operational, thus showing me the I/O on the unaffected stations.
  16. I am using a Beckhoff windows based controller, with  TwinCAT modular I/O (EL series). I have several problems: 1) Our HMI frequently loses comm. with the PLC. Beckhoff seems to use their own special networking. 2) The PLC ladder language supported is very rudimentary. For example, I had to create my own function block just to do simple analog scaling. 3) Their documentation is pretty bad -- Web based and very hard to find specific information. I would like to replace the Beckhioff controller with a more standard industrial PLC (like Automation Direct Productivity -- I like the programming language and ease of use.) My question is -- how can I use the existing Twincat I/O with AD, for example Modbus TCP. Is there some sort of gateway available for this purpose?
  17. Hello, I am new to the Beckhoff PLC systems and PROFINET. For one of the applications I am trying to connect ETHERCAT module to the PROFINET Controller which is in turm connected to IO modules. I am using the following modules: ETHERCAT coupler EK1100,EL6631 (Controller), EL6631(Device) --> EL6631(Controller)*,EL1008 (Input module) The connection between EL6631(Device) --> EL6631(Controller)* is via Ethernet cable. I am not able to configure the connection in the above mentioned fashion. Please let me know if this is a valid configuration? Is there any simpler way to achive this. And I am using the TwinCAT3 software on my PC.   Thanksk in advance :)
  18. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  19. thesis project

    Hello, For my thesis i'm using a beckhoff cx9020,a sunnyboy and a sunnyisland with rs485 communication protocol sma net. One of the things I need to do is to log everything from the sunny devices realtime. and here is where my problem starts. I am using rs485 to communicate with the devices via plc but I don't find any documention for what i need to request or send to get usefull data. does anyone here have an idea? Yours truly Jonas Vanhulle
  20. I am converting a PLC-5-40 processor that also has a SST side car for Profibus Dp communication to BK3100 modules on the equipment. To a Control Logix L-72 processsor using a Molex SST-PB3-CLX card to the Profibus modules. Everything went some what smooth until I got to the SSI transducers in the Profibus. The word arrangement is not coming in the same as with the PLC-5. Is there anybody else that has run into this problem and is there a solution. I have contacted Molex, Balluff and Beckhoff the first 2 got back to me I am still waiting on Beckhoff.
  21. Hi I just given a swanky new laptop at work, which is lovely and everything, but does not have an ethernet port. Unfazed by this, I just got hold of a USB to LAN adapter and got to work. My primary development environment is Beckhoff TwinCAT, and was rather gutted to find there are no real-time ethernet devices on the machine(attached image for reference). I was wondering if there was any adapter that I could use for real-time ethernet device. I am aware of latency issues and this would only be used to test communication and make sure everything talk to each other. Cheers
  22. Hi, We have Beckhoff CPU module CX1020-0113 and two Beckhoff AC servo drives conneted using EL7201 card. I want to run both of the motors simultaneously using TwinCAT 2 PLC Control. Since I want to control the position, so I am using MC_AbsolutePosition function block. The sinusoidal trajectory can be taken as 60*SIN(w*t) /*here t is time. w is angular frequency which is constant*/Below is the snippet from PLC program - Please see below image for System Manager Info - Can somebody tell me how to provide sinusoidal trajectory as position? Please note that both the motors must run simultaneously. - Thanks Ravi
  23. Hi, I am calculating velocity and acceleration from position inside TwinCAT PLC Control V2. All these equations have only one variable which is time. Below is the PLC code- (* We are using the external set point generator functionality *)NewPosition := theta_max*COS(omega*t); (* t is time in second *)NewVelocity := -theta_max*omega*SIN(omega*t);NewAcceleration := -omega*omega*theta_max*COS(omega*t);IF NewVelocity=0 AND NewAcceleration=0 THEN NewDirection := 0; (* stand still *)ELSIF NewVelocity >= 0 THEN NewDirection := 1; (* positive motion *)ELSE NewDirection := -1; (* negative motion *)END_IFt:=t+0.01; (* The task is called at every 10 ms = 0.01sec *)(* feed the dynamic data into the external setpoint generator interface of axis *)MC_ExtSetPointGenFeed( Position := NewPosition, Velocity := NewVelocity, Acceleration := NewAcceleration, Direction := NewDirection, Axis := Joint_2);-------------------------------------------------------------(* Below parameters are defined in Global Variables file *)VAR_GLOBAL CONSTANT theta_max: INT := 60; (* in degree *) omega: REAL := 0.62; (* 2PI/Time Period=10sec *)END_VARThe MATLAB simulation of the above equations gives me following results- But this does not work in real Beckhoff motor. Please suggest.
  24. Beckhoff CX1000 PLC question

    I have a machine with a CX1001-0121 controller in it. I don't have the sourcecode for it. I am able to connect and see and force the outputs. Is there a way to extract the PLC program? Even if it's only contact and coils that would be something.
  25. PLC Integration by SCADA

    Hello Experts, Good day to you all. I just can’t figure how I will integrate five S7-300 PLC. CPU 315-2dp. (1.Blow moulding-> 2. filler-> 3. labeller-> 4. packer-> 5. Palletizer) I just want to get the speed of its machine, the output rate and the alarm, this is purely monitoring, archiving, no need to control anything here. I planning about SCADA system. I’m thinking if I could do the same way in my previous project, which I’ve done in profibus master/slave for two s7-300. But this time the five PLC’s already set the profibus as master to the danfoss drive, sew drives, ET200s and many more profibus slave. I plan to buy 1 PLC as master and I will set all as slave, but how since all the five existing PLC, its profibus already configured as master. Thank you very much. All your inputs is really appreciated.