Search the Community

Showing results for tags 'bcd to binary decimal'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 7 results

  1. Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
  2. Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
  3. How to watch the value in decimal directly in the ladder page ?  Default Hexadecimal The only way I can do it is in Watch Tab and I/O map per example Thank you
  4. Binary Mode vs BCD Mode

    Hi all, I have created a program using the binary counter and timer instructions and everything works fine (yay!), but I am not entirely sure if there is a major difference between using Binary mode or BCD Mode on the PLC. Does it just come down to personal preference or is there an advantage to using a particular mode over the other? Also, does the operating mode affect anything besides counter/timer? The option in CX-Programmer seems to indicate it doesn't. Cheers, Jay
  5. 8_decimal Data Displays as only 4_Decimals !

    I am Facing Problem Getting Kwh Readings From My Satec MFM(PM130-PLUS), Required for an easy & reliable Monitoring On Energy Consumption . Connected via RTU Slave Interface with SCADA User Interface (GE_Cimplicity). Here's what happening : Actual Kwh Reading has 8_decimal data digits on MFM LED Display but on Cimplicity SCADA User Interface Screen It only able to Display it as 4_Decimals point digit, eg, 63290058 kwh shows as 0058 , and 15299999 kwh shows as 9999 , and then 15300001 kwh shows as 0001 i.e 1 only! Plz Do a Rply , your slight approach to my Query Will be highly Appreciated!! :)  
  6. binary transfer

    hi guys Im a bit new to omron programming,i needed to trace some data for my scada system to display, and i have encountered "binary transfer" command and i'm not really sure if i understand it correctly any enlightenment in this matter will be much appreciated thanks
  7. Program 16 position rotary selector switch

    I have a 16 position rotary selector switch I'm trying to program to a CQM1 PLC, that I will also be programming to a micrologix 1200 in the future, using CX Programmer. The switch connects to the PLC using 4 inputs, and activates the inputs in a binary pattern 0-16 as I turn the switch. For example: if the switch is wired to the first four inputs of the PLC, and is turned to "9" 0.0 and 0.3 will be activated and 0.1 and 0.2 will not, just like binary 9 = 1001. I have tried several things trying to get the PLC to accept these inputs as a single "data-point," and then convert to BCD or Hex to use in a timer. I'm having no luck! Does anyone have any ideas how this is done? The switch is a Tosoku DPP01 015L20RCB, and because of the age of the PLC my instruction set is limited. Thank you in advance!