Search the Community

Showing results for tags 'b&r automation studio'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 158 results

  1. Hi,  I am writing some routines to decode the data from my Input: data array to User-defined Array Parameters. Is that possible to have a generic routine to decode data coming from more than one module? I have two Module ENode and ENode_1. I have defined User-Defined parameters for the module. Can I make a generic routine to decode the data coming from these two modules and put them in the defined arrays?  the two arrays ENodeData[0] and ENodeData[1] have the Generic User-Defined parameters.
  2. Enumerations in Recipes

    Hello,   Is there a way to limit the input of an ingredient value, possibly by use of an Enum?  For example, I have an ingredient called Press_Speed. I want the values to be either Normal, Slow_1x, Slow_2x, or Slow_3x. On the PLC these values are interpreted as numbers. Can I limit the input to the String representation of the Enum?   I'm using the NA series HMI with Sysmac Studio. 
  3. Hello everybody, i'm using sysmac studio and i'm new with the program. I want to use the ladder tools to describe the influence of the valves on the temperature and the flow. Can somebody help me how to do this? and where to start? The requirements of the project are: Valve TCV 35.01 is a temperature valve: u can control the outlet temperature of the water flow. 100% = 2 degrees celcius and 0% = 20 degrees celcius. Valve LCV 35.01 is a level valve: u can control the outlet water flow. 100% = 50litres/hour and 0%=0litres/hour. In the appendix u can see a view of the proces.  
  4. Hi, i am currently trying to integrate visual studio with advanced HMI tool box to an Omron PLC (cp1h). i am trying to use one of the communication option which is "OmronSerialFinsCom*". But I have no idea how to actually do it. can anybody help me with the setting of the "OmronSerialFinsCom*" properties and where should i download the USB driver for my PLC (cp1h). Thank you in advance.
  5. Hi Everyone! I try to read Analog Data in PLC Master through Salve Module (ECT-21) but i dont see any data, with an Digital Module i can read and write, but with analogic module i can't do anything. The analog module works perfect, i have 4-20ma Simulator and work fine. Modules: PLC: NJ501-1300 Slave: ECT-21 Analog: ADO81-V1 Can u help me? Regads..
  6. In Sysmac Studio, is there a way of addressing Array of for argument sake 100 INT. For ex: TEMP[array 0..99 of int]- AT %W0  If I do that will TEMP[1] be %W1 or I cannot address array. PS: I am currently using NJ501-1300 and Omron NB Screen. I am reading/writing total of 450 variable all comprise of either INT or WORD. I would like to group them together for easy access and keeping my variable table neat. Is there a better way of doing this. Any help is much appreciated.
  7. Indirect Addressing NA Terminal

    Hi. ¿Is there a way to use indirect addressing on a NA Panel?  I need to use a motor operation template for several motors and i think is not very smart doing the same panel over and over. I have always created a screen and then reused it (on FactoryTalk View, Intouch, Schneider Vijeo) The problem is that we don't find any article about indirect addressing on NA panels. So we dont know how to do it. On CXDesigner we used DM addressing so we could use a template instead of creating many button panels when we need to operate a motor, for example. Its like when you use indirect tags on Intouch or Parameter files on FTV. I fear that indirect Addressing is not possible, but in that case ¿Which method do you recommend? ¿Got an example or an article mentioning it? Thanks in advance.
  8. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached
  9. Sysmac studio network configurator

    hi could you help me to find sysmac studio network configurator? from where i can start it?
  10. Dhanvanthri Engineers Pvt. Ltd., is a private limited company established in 1983 having well-equipped manufacturing facility at TTC Industrial Area, Mahape, Navi Mumbai in the close vicinity of Mumbai.
  11. C-More Recipes

    Hi everyone, I am using an EA9 touch panel from automation direct. I am using C-more's "call recipe" function to create and write new recipes, inputted by the user. My problem is that every time I make a change in C-more and send it to the panel, I lose all of the recipes created by the user because they are over written by the ones (there and not there) in my recipe database, on my computer. Now, I know this can be avoided by just uploading from the panel to start with. But inevitably, I will forget to do that one day. I would like to store the recipes on an SD card, so that they will not be lost when I make changes to the program. Has anyone done this before? Is it possible?
  12. I'm printing extracts of my code for change control records. The print quality is terrible as it seems to output low-resolution JPEGs to the PDF or XPS files rather than vectored graphics and TrueType (or other vectored) fonts. See the attached close-up showing the artifacts. Exporting in this fashion also makes the resultant PDF unsearchable. I can't find any configuration options for this. Is there a fix?
  13. Studio 5000 no From Upload option

    So my company recently purchased a new Allen Bradley PLC Demo kit from Amatrol (CompactLogix L16ER) and I installed the Studio 5000 v24 onto our company computer and started going through the Amatrol Lesson Plans. But then I had a bit of a snag. The lessons required that I open the files from the From Upload option on the Studio 5000 start up screen. Only, it wasn't there! There is no From Upload option on the start up screen. Anyone have any ideas how or why it's not there, and most importantly, how to get it there? It's kind of important!   Thanks!
  14. I have version 1.17  .. and when I tried to import a file from a friend, I got this instead: Is there anything higher than V1.17? 
  15. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  16. Good morning i want to know how i can recognize into the compactlogix 1769-L24 ER the micro 850 (2080-LC50-24QBB), because i want to communicate this two devices with MSG, i already i can see these two equipments into RSlinx but when i start Studio 5000 i don't know whick module i have to use it to recognize the micro 850, please help me
  17. I am new in sysmac studio programming. I used WSFT function (word shift) in cx-programmer. What function I will use in Sysmac studio? Thanks.
  18. Hi, I'm a long time lurker and would like to start by saying thanks for all the help over the years, much appreciated!  This is my first post, please be gentle. I'm working through a large project with an L83 (V28) including 75 EIP nodes & 5 servos.  We have a need for quick real-time response of 2 cameras during a quick servo move (taking several pictures).  I've broken my program up into a few event driven tasks (allowing me to chose the execution time interval (5 to 8 ms for more important tasks and 20 ms for less important tasks, etc.)), along with these I have 2 periodic tasks: 1 for my HMIs & faults running every 30ms and 1 for this quick real-time response camera situation running at .5ms which contains my camera and servo logic.  Everything is running well and seems responsive and repeatable enough, but I am now adding the second half of the logic which will essentially double everything (2 up system).  This has made me consider the best structure approach: Is it better to have a few larger routines within a few larger tasks or better to have more smaller tasks containing an abundance of smaller routines or some other different mix? Thanks, JD43    
  19. pc to plc

    I'm making a plc interface tasks using vb serial communications, I used omron plc CPM2A and Visual Basic 2013 to control and monitor the plc, but I do not understand how to transfer to plc vb command, and the response from the plc to vb. please help me, I'm sorry if my english language is not good
  20. Inductive Automation is conducting a 5-day training course covering the core features of Ignition by Inductive Automation. It will be hosted at Flexware Innovation which is located near Indianapolis, Indiana. Most of the Ignition Core Classes in the US are offered in California, but for this time only we're offering it in Indy - midwest USA. Whether you are a new user to Ignition or an existing user looking to discover the full breadth of Ignition's capabilities, this is the course for you! You will get an in-depth look at the architecture of Ignition, involving the interactions between PLCs and SQL databases. You will learn how successful projects are planned and executed from start to finish. The course is 5 days long with class from 9 AM - 4 PM each day. The course is taught in a classroom where each attendee must supply his/her own computer. Complimentary lunch will be provided each day. The curriculum includes lecture, demonstration, and the creation of a live project that gives each student hands-on experience with all major features of Ignition. The format of the course encourages students to ask questions relevant to specific projects they have planned.   When: May 15-19, 2017 Class Hours: 9am - 4pm Where: Flexware Innovation - 9128 Technology Lane, Fishers, IN 46038 Cost: $2500 first attendee ($2000 additional attendees)   To learn more and register, please visit: http://www.flexwareinnovation.com/inductive-automations-ignition-core-training-fishers-indiana/ OR https://inductiveautomation.com/training/course/details/475
  21. Dialog File Browsing

    Hello, I am looking for a way to use the OpenFileDialog in VB to be able to select a recipe file to import. I read this forum: and thought that maybe I could access the OpenFileDialog function from the code, but System.Windows.Forms namespace is unavailable.  Is there any other way to access the dialog box to let the user select a file? I am using Sysmac Studio with an NA5 series HMI. Thank you for your help.
  22. Has anyone been able to produce screenshots of an NA project via File/Print menu option on Sysmac Studio? All this does for me is produce an image of a page showing objects or controls on the page itself, but it does not include anything from pages that are setup as 'background' for the page. This makes producing documentation a real pain. Am I missing something? Thanks for any help.
  23. Hi, I'm working on a projects where i need the button text to be dynamic.(assigned by a string variable) i have not been able to figure out how to accomplish this easily. I made a workaround with placing a label over the button and have the label refer to a string, but it would be soo much easier and smoother to just have the button text assigned a variable. I would think i could access the the text field through code ,like: Btn_1.Text=My_Btn_String_1, but have had no luck with this. Would Greatly appreciate any help. Thanks, Frank.  
  24. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?
  25. I'm modifying an existing NA5 HMI program and can find my way around the program OK except for assigning text to buttons. Every time I add a new button it assigns the same Resource ID for the button text as was used on the previous button. If I copy and paste a button it also uses the same Resource ID. This is to be expected but there doesn't seem to be a way to change the Resource ID associate with an object. Note that the Resource ID value is greyed out and not changeable. Editing the text on this button will affect the other two visible in the screengrab even though they were created separately (and not by copy and paste). Has anyone any ideas on the correct way to set individual Resource IDs on the buttons?