Search the Community

  Hello , can someone explain to me what the difference between the reset ( RES ) and clear ( CLR) in RSLogix software? Please respond ASAP

Dear  I have a Premium TSX P57 2634M , in module TSX DMY 28FK the red led Fault I/O starting blinked, general (shortcircuit, etc)  , all field connection was verified are  OK. Is possible reset the fault , without restart the PLC?   thanks in advance

How can I do a hardware 'factory reset' on a Q UDE CPU .... NOT using any software such as GX Developer or Works? I understand in the 'Write to PLC' menu it's possbile to Clear / Format / Arrange PLC memory - this isn't what I'm asking for. Under normal circumstances we routinely reload the PLC code / parameters / intelligent function data all remotely from our offices to our customers facilities and all works well. With the newer Q UDE CPUs it is possible to scan the network and effectively do a remote bare-metal recover to a new CPU. If the Q UDE CPU became unresponsive I would like to know how to reset the CPU back to factory defaults. In this scenario we would be asking local site electricians to carry out this reset procedure - after which we would reload the code remotely from the office. Documentation says power down CPU remove BAT for > 10 mins. I’ve powered down, left in STOP state and removed BAT for 16hours - then tested this morning – IP / program perfect and online immediately without battery connected. This retention is a wonderful feature – but if I want to deliberately do a hardware factory reset how do I do it ?

Hi All, Thanks to all who helped with my first post - how to get started with a second-hand CPM1A PLC.  Thought I should now start a more specific thread. I now have Syswin 3.4 running in Windows xp mode in Windows Virtual PC, I think I have a Chinese USB-CIF02 comms cable/adapter and drivers correctly installed in Win xp mode.  The PLC powers up with the PWR and RUN LEDs lit.  The USB adapter TX LED flickers when I use the Syswin comms test function, indicating that Syswin is talking to the adapter.  But having tried 128 combinations of comms protocol and unit address at 9600 baud without success, I believe there are now two possibilities. First, while Syswin is sending something to the USB adapter, it may not be 'talking' correctly to the PLC .OR. the PLC is set for some unusual communications settings for reasons unknown, that I may never be able to stumble upon.  Both possibilities could be eliminated if I could return the PLC to the factory default state, with a known comms setup. However, it seems the comms settings in DM words are stored in Flash memory and can only be changed if I can 'talk' to the PLC - Catch 22?  I can find no sign of any DIP switches or hardware reset button etc.  Surely there must be some way to clear the flash memory to return the device to the factory default state?  All suggestions gratefully received. Ian

Hi All, Anybody have used this Powerflex 755 option card( 20-750-UFB-1 )?.. im using an SEW absolute encoder with sin cos config. my question is how to Home or zero the reading, which encoder parameter should i call. Big thanks for help... Cheers