Search the Community
Showing results for tags 'analog modicon 221'.
Found 146 results
-
Has anyone successfully used a 1783-NATR for Modbus TCP communication between a ProSoft MNET card (in the ControlLogix rack) and a Modicon Quantum? ProSoft MNET: 10.x.y.z Modicon Quantum: 192.168.1.x There is one (1) ProSoft MNET and four (4) Modicon Quantum's. NOTE: I know there are other devices that support this behavior...the NATR is the suggested standard hardware. We are getting various responses from distribution and support. ...I was hoping someone in the community could confirm. Thanks for your time!
-
Hello! I was trying to configure an Temperature Sensor using the Analog Threshold Trigger to parameters and output activation but, when I put this function on the program, there's just input point, on the output there's no way to link to an DO, when I select the other one's analog function's to see, they all have the same problem. How can I fix this?
-
Dear All, TSX AEY414 was installed on a machine and was working fine. suddenly module becomes faulty and its ERR LED tuned ON we replace the new same module and the new module was showing the same error we replace the 3rd new module , this worked for 8-12 hours fine. now the situation is that RUN LED is on of the module, but values on HMI display remains 0.0 can anyone help me please? waiting for reply Thanks
-
Hello there, Today i have commissioned my first project with OMRON make PLC. Model: CP1L-EM40DT1D. (CX-Programmer) I have 2 built in 0-10V Analog Inputs on the plc. for analog input no-1 i get the digital value of 0-1000 in specific plc register address corresponding the 0-10V. (Factory setup) But today on site, i have noticed that some miner value of 0 to 50 is always coming and fluctuating very fast in that register, however the transmitter are genetaring 0.0V only (I have checked using digital multimeter with high precision) PLC and Transmitter are already grounded and all the cable connections are tight as well. so how to overcome this high fluctuating value ? is there any setting to filter the input ?
-
Hi there! I'm trying to communicate HMIS5T HMI with a Modicon Micro TSX3722001 PLC. The communication is OK, but whenever I try to enter some data into a numeric display I get an error that says "Method or function in Communications System unsupported" and data won't change on PLC's Animation Table. Also, if I modify a variable's value in PL7 Pro, the value in the HMI numeric display won't change properly. It displays the last digit of the binary format of the number (let's say I write a "3" on PL7 Pro, then I get a "1" on the numeric display, despite all data types being UINT, and all ranges are OK. Then if I write any number which binary version ends in 0, I get that 0 on the numeric display, nothing else. Again, all data types and ranges are OK). Changing variables' source on Vijeo Designer to Internal doesn't seem to work. So I'm wondering what else must I do in order to send and receive data from/to HMI and PLC? Thanks in advance and I hope you can help me! Update: Got this solved. For anyone wondering, Vijeo Designer 6.2 SP8 it's kinda buggy with Unitelway communication. There's a hotfix that solves this problem, provided free by Schneider.
-
This is a 1756-IF8 rev 1.5 Analog Input module. This has happened a couple times where the Module Input Data, (not mapped), goes to the high limit and freezes (Data Monitor data is static). Plant operators pointed out the trending wasn't accurate. There is no fault on the module, no yellow triangle on the system tree for the module. The Module properties show no faults, and RUNNING. I have done a "Reset Module" both times, (Module Properties - Module Info tab), while monitoring the module data. As soon as it resets, instantly the Data Monitor starts showing live data. I'm going to try and replace the module at first, but I have some concerns. Has anyone run into this before? I can't seem to find any information on the "Reset Module" animation, and what it actually does. Any information, (or where to look), would be appreciated. I don't like to hot swap, but I believe I will need to in this case, (utility). Will the current properties, e.g. scaling transfer to the new module? Thanks Dave Redman
-
I have an 8 point analog input card on a rack with a SLC 5/04 CPU. It has been in operation for 20 years or so. There have been some power problems at site lately and ever since they fixed them I have been having issues with 3 of the 4-20mA circuits on this card showing open circuit. I have had my meter on them when they show open circuit. The signal reads 3.96mA, just below the 4mA minimum and boom, the machine goes down. Is there a way to adjust this tolerance?? I don't think there is anything wrong with the 3 transmitters so the error is just a nuisance.
-
Hello, I have an M2I Top RW (model: 1000WD) connected to a Schneider Modicon M221 PLC. The HMI is connected and I is working perfectly reading data from the PLC via ethernet. I can't seem to find a way to write to the PLC from the HMI. I would like to control the PLC from the HMI, I know this is possible with Fatek PLCs with the same HMI model. please help - how would I create a bit command from the HMI to the PLC? what registers? what inputs in the PLC? thanks
-
M221C40R + TM3AQ2 analog output
Boushard posted a topic in Modicon / Telemecanique / Schneider Electric
Hi guys, I'm in another project with another brand on PLC and this time I thick I hit a pretty solid wall. Long story short, I need to change a -10 +10v signal send to a DC motor drive based on a "recipe" selected with a 10 positions camswitch. I've never programmed schneider PLC, except the zélio one who are pretty simple to understand. Apparently Modicon are much more complex to program with the knowledge I have. Is there documentation available somewhere I can use to understand how to code analog output. -
TSX PSY 3610 power supply module alarm contact open
Sanu posted a topic in Modicon / Telemecanique / Schneider Electric
Hi, I have a modicon premium plc rack with TSX PSY 3610 power supply module. The psy 3610 power supply has an alarm contact and it is used in a loop to energize a hard ware relay for 24VDC supply to the DO module FTA boards. There is a safety button in parallel to the alarm contact so that during startup we can press this button, energies DO module loops and all IO faults cleared and power supply alarm contact latches The problem is that this power supply alarm contact remains always open even when IO report no faults. The PLC has MAST task only and it is running with no faults. If I jumper the alarm contact all the IO's are healthy . tried changing the power supply and DO modules. no hope. please help. -
Hey there forum guru's!!! I am trying to read through the manuals for an NX-HAD401 High Speed Analog Input Card. It is not very clear as to where you assign your variable in order to grab a channels analog input value. Can you point me in the right direction? I am thinking it is in the "Analog Input Values 1 to 10" and if so why is it set up as an array? Is it because it takes the average of the samplings and uses the result as the channels input value? I am sure I will have more questions but this may clear up a few.
-
Good day all, I recently working an assignment to read analog data from sensors. I connected everything just as what the manual for sensor stated. My PLC is DVP20SX2 and the sensor data i want is 4-20mA. The analog sensor has two wires, Analog Output + and Analog Output GND. I connected the + to I0+ and the GND to the VI0-, but when I work online using the ISPSoft, I can't get any data. My doubt is the wiring. Can anyone guide me on this? Is my wiring wrong? does analog works the same as digital, where we have to connect to same COM?
-
Hello all, Thanks for the forum which has provided me with a lot of help overtime. I'm posting my first thread since I can't seem to find an answer to my issue. I'll quickly explain the situation: I'll be installing a RTD sensor to a GE Fanuc IC200ALG264 analog input module using a 4-20mA converter. Everything is fine except I can't seem to understand the polarities of the Fanuc inputs. I'll explain better: the module has an IC200CHS022 for the terminals, 15 terminals total, and the manual is reporting a "number" and a "connection" for each terminal. Now, the "number" seems to correspond to the visible pin of the terminal. But the positive and negative symbols are represented on the "connection", which I can't seem to wrap my head around what it means. Attached are abstracts from the manual and a photo of the terminals. Please tell me where to connect positive and negative outputs of the 4-20mA converter. Thank you. Terminals Table Terminals drawing Terminals photo (front)
-
M221 & SoMachine Basic - ANALOG INPUT SCALING
horvatmiha posted a topic in Modicon / Telemecanique / Schneider Electric
Hello! I am new at PLC programming. I am using TM221CE16R PLC with TM3AI8 analog input module and SoMachine Basic v1.6. I am trying to scale analog input value. I am using 4-20 mA pressure sensor. I managed my wiring so that I get raw values in SoMachine Basic. But I don't know how to scale these values to usable values. My sensor works in range 0 - 16 bar. What is best way to get values? Is it PID function block or multioperand function block using equations to get range 0 - 16? I will appreciate your help. Thanks in advance! -
Hi every body, could you please help me; i have a mitsubishi plc serie iq-rwith the followings modules:powersupply r61p, r01cpu , rx40c7 inputs , ry10r2 outputs , r60adv8 analoginputs and r60da4 analog outputs. i am newbe with mitsubishi plc ;i would like to learn using the analog output of the R60DA4.for exemple i would send a digital value to the ch1 and convert it a voltage that i can mesure on the output of channel1.i have tried but i didn't succeed.i am using gxwork3.i have configured channel1 as +10v -10v output, normal mode , normal output;then i made a simple program in sfc to try this conversion but i get nothing in the output of channel1. i found that the digital value should be sent to the adress D11 wich is the adress of channel1.here you will find the file i made with gxworks3.could you please help me. ANALOGOUTPUTSCF.gx3
-
Hi all, I am trying to set up a PID loop for a project I'm working on, and I was hoping someone could take a look at it for me. Most of what is written comes from the Q, L programming manual, but I've changed a few things so that the program can write changes to the SV as needed. The processor is a Q03UDE and the Analog Module is a Q64AD2DA, using only channels 1 and 5. Thanks for looking! PID Project.gxw
-
Hi all, I'm trying to set up the analog on channel 1 of the fx5-4ad module. I've set my parameters but I'm wondering if anyone has an example of the ladder side in GX works 3. I'm looking to read the signal in an hmi. Thanks
-
Hi Friends, I am in a requirement to control huge nearly 300 channels Analog in a system. That is through PLC i need to give a Voltage output for 250 channels. Which Configuration will suitable for this requirement. Is it possible? Any difficult is their in controlling this much Analog output in PLC? Kindly advice me..
-
CP1L-L14DRD CP1W-AD041 I have my configuration words set to #80BB for both output words with the intention of having 0-10 input. With my input voltage at 5.25 I get 6300 the maximum range. I entered the bit wise in my calculator 1000000011011101 and it converts to 80DD. Tried both those options with the same result. Can anyone shed some light on what the problem is?
-
Dear All, TM241CE40R is installed with firmware 4.0.3.18 If I buy new CPU with some other firmware, will it work or I will need to change the firmware?
-
Hello. I am having 22 slaves communicating to a master on rs485 half duplex.i have selected baud rate as 38400 on a length of 800m.The problem is out of 22 devices only six are communicating .i have checked wiring,inserted termination resistor but still not getting rest of the devices alive.is it that i have selected high baud rate on a long length?this is the only problem as i am seeing it.can somebody help me on this issue
-
Frozen Analog Input on Compact Logix
Dan Truitt posted a topic in Allen Bradley / Rockwell Automation
This is a bizarre one... CompactLogix, 1769-IF8 with 1492-AIFM8-F-5 wiring system. My client has reported several instances where one of his flow rate displays is frozen at its maximum value. Each time, I have gone to the site, found that the value in the analog input tag is at full scale, and measured more than 20mA at the input - as much as 28mA! I measure it using a clamp-on meter and I measure it at the input module (1769-IF8) and the external, pre-wired terminal block (1492-AIFM8-F-5). I cycle power to the PLC. No change. I cycle power on the transmitting device. No change. I disconnect and reconnect the input (signal wire at the module or the terminal block) and everything goes back to normal. This has happened on multiple channels on multiple input modules and with two different types of transmitters. I didn't install this system, but it seems to have been done properly and it had been running fine for many years. These problems just started happening out of the blue. Has anyone out there had any similar experience? This is a new one for me after more than 25 years in the business. -
Buying all new industrial surplus and even some used.
TrojanSupply posted a topic in For Sale, Employment, Services or Wanted
Looking for any and all new industrial surplus and even some used on a case by case basis. Anyone have any questions feel free to email me at contact@trojansupply.com We also have some great deals on any items we have instock we compete on price as we are a small entity. Same day shipping available. -
Hello - we run a car wash that is controlled by a Modicon TSX Micro 3721001. It is indicating a CPU fault. I've attached a picture of the unit in place, with the LEDs lit. I have ordered a new base unit (2nd picture). I haven't tried it out yet, but it is tested working. I am hoping a base unit replacement will solve the problem, but wondering if it it possible the problem could be in the modules? I did not order those but now wondering if I should have... If the issue could be with the modules, is there a way to test which one it would be so I won't need to order all 4? If it coult be a module, I might order that now as I am in a rush to get back in service. Thanks for any guidance! Andy
-
Hello Everyone, This is first time i am using Omron's CX-Programmer. PLC- CP1L-EM40DT1-D I have 2 built in analog input of 0-10V on PLC Board. I want to know the default resolution, Data Type and Register address to detect analog Input for my further programming. Please Help me with these...
