Search the Community
Showing results for tags 'alarm control'.
Found 134 results
-
Good afternoon, I have a problem in an application for a rotary knife, I'm using a MR-JE-B servo to make this movement, while my material is powered by an inverter connected to a modbus rs485 network, with a 5v encoder connected directly in motion. I'm having some problems and I think it's my cam curve. I have a very high refeneration, and the system doesn't obey the size of the length I want the cut. It always cuts the same size, regardless of the configuration I use, it always cuts to 245mm. Put some photos, how are my settings. Grateful in advance, if anyone can help me. Dover_roll_1-Motion-configuração_jog_manual.gx3
-
Hi, guys.I am struggling to develop a solution for a costumer in a Historical Alarm Viewer screen, I am new to Cimplicity and to database supervisory interface. Among other things, the customer is asking to:- Change the "A"; "R"; "G"; "N" notations under "log_action" column to somenthing more intuitive for the users (operation). Please have a look at the image "image.jpg";-Change the point manager process "MASTER_PTMR0_RP" log under "logged_by" column to the user that is currently logged in. Specificaly saying, when I send a command (changing a setpoint or issue a reset command, for example), although it is the user acting, the historical alarm viewer logs the action as "MASTER_PTMR_RP". I Imagine that is because this process is reponsable for exchange point data to/from the IHM points database, but it is still essential to the system administrator to know which user sent that reset command or changed the variable setpoint.The log inputs at the image "image.jpg" has boolean and integer commands (".CXX" sufix);-Log into the historical alarm viewer if the user logs out and what user logged in.It is valid to mention that I am using the ALARM_LOG table (apparently it is the only table working with the application, DATA_LOG, EM_LOG and the others simply do not work, they don't show any column at all, honestly I don't know why).I tried to use Microsoft SQL Server Management Studio to edit the table information, but, somehow, it seems to be blocked to edition.I imagine they are some specific configurations, but I have no idea on how to acomplish them. Maybe if I could use other tables would fulfill the requirements, but , like I said, they are not working (right now I am trying to re-configure the Database Logger from the beggingin to see if it works with other tables).If you could give me some inisights on how to change these settings I would be very grateful. I will be happy to give more information if needed.Thanks in advance.
-
Has anyone found a way to put the UserAlarmViewer messages into a Label? I use 3 different alarm levels and would like to have a single line alarm banner. In NJ, I use an Array of Bool for triggers. In Siemens, I made a message banner that cycles through each message every 3 seconds from a text file and displays the string in a label. Logic is much different in Omron so rewriting is not possible, nor does Omron use VBA.
-
Alarm and event server alarm missing issue.
nildazzler posted a topic in Allen Bradley / Rockwell Automation
Hi all, I am using alarms to generate reports through sql . But sometimes my alarms are getting missed and due to that my reports are not getting proper expected output. My alarm bit is almost high for 3 to 6 seconds , however i have observed that its getting missed . I dont know why . In below image after @22.41.03 the next snap should have been captured around @22.41.33 Instead of that it captured @22.42.03 have anyone faced issue with alarm missing issue? Any suggestions would be very helpful. Thank you. -
Hey i want to know that in mitsubishi A2SH-S1 CPU how can i determine that battery voltage is what and if battery voltage is low then i want to on an output so that i can change the battery with the new one so that my program does not gets erased.
-
Hi: I need to change an old PLC with NX1p2 to control 3 servo motor by means of Analog Outputs couple with encoders, My job is to change the PLC only. So the servo drives and drivers are untouchable (No budget and involve too much mechanical works). I observed that Sysmac Sttudio Axes setting has this: Servo Axes, Encoder axes, Virtual Servo Axis and Virtual Encoder Axes. I believe the Encoder Axes couple with Analog Output is able to to do the Job? If so, what function block should i use? If no, do any body have a suggestion of any function block i can use? Thanks
-
Hello I am trying to communicate a CJ1M with a CJ1W-EIP21 Card, with a Logix Control, but I have not been successful, what I am looking for is to read data, from the OMRON and see it in the Logix Control, but I have not been able to establish communication, I am looking for someone You will already have a functional example, with the backups of both PLC'S, to be able to observe how they made the configuration. Thank you for your support Greetings
-
I'm having trouble with some Powerflex 525 drives. Right now what I need to do is run them manually from the keypad to test conveyor belts. Is there a way to do this and if so how? Thanks in advance.
-
PF527 Control Sync Alarm / Module Sync Alarm
Jiggadoo posted a topic in Allen Bradley / Rockwell Automation
Hello Sirs! I have a problem with PF527. I get alarms 'control sync alarm' and 'module sync alarm' occasionally. I suppose this meaning that PLC is missing some data from the PF527 device. How to confirm this or what should I do with the problem? Any ideas? Motion group update period is 8ms. Also this device is the last device in the ethernet line. I am thinking to pull the cable directly to the switch near PLC. I am not sure does it help? -
Excel Export of Alarms in Citect SCADA 7.50.
Jitendra Rathod posted a topic in Modicon / Telemecanique / Schneider Electric
Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for this issue. Thanks... -
Hello Everyone. We have Schneider TM241 PLC Along with Citect SCADA System at 100MWp Solar Power Plant to monitor and control various equipments like Inverters, Switch-Yard, MFMs, Weather Monitoring Systems etc... Government Authority here asked every solar plant to control the generation as per the instructions by Load Dispatch Center, for that we need to implement logic to control Generation as per requirement. For that we are controlling generation from inverters by giving them generation setpoints calculated by PLC using PID function. But we are facing one problem while using PID. (FB_PID of Toolbox Library) Suppose we need to generate only 60MW out of 100MW. So we set PID setpoint to 60MW and according to that we get PID output and according to that PID output value we provide generation setpoint to every inverters. This system works very fine until the clouds comes into the picture. Now suppose Setpoint of PID is 60MW and PV is also near about 60MW, and suddenly large cloud comes over plant and block solar radiation. In this case generation comes down to 10MWp(or any value below 60MW), So output of PID will Increase and keep increasing and settle at the Maximum value. but without solar radiation generation value stays very down then Setpoint. Now suddenly Cloud moves and again solar radiation increase, but the PID output is maximum at that time so, Suddenly Generation goes from 10MW to near about maximum capacity (100MW) instead of 60MW, and then it will slowly comes down to 60MW. We need to rectify this generation shoot up when cloud moves. Anyone have idea how can we solve this problem or anyone have programmed PID in this kind of situation. Is there any function block available to do this correctly like function block of PID with two Reference or something like that... We are using TM241 which is CoDeSys based PLC.
-
Hello everyone, I have a Kinetix 6000 CIP drive (unwind) and I need to control its speed by a PID controller. I have everything working except the MCD instruction doesn't pick up on the PID output value change. It changes the JOG speed, which I use to control the unwind, if I set the speed manually, which is slow. The PID changes the speed almost continuously. Any suggestions are welcome. This is how I'm attempting to control the speed: A1_r_JogSpeed = PID output value Thank you
-
Dear All, Need your help. I have problem with plc cj2m cpu35. After power trip plc error. Err HE Ip 01..what is mean? plc also connected with one pc using ethernet cable. Any suggestion need to do...
-
So I'm having trouble writing a FBD within my current program for a slitting line. I need to keep a constant tension on my web as it is being recoiled onto our recoiler. I wrote a simple program using a sensor to read the growing rate of the coil to get a radius and I have feedback on my torque on the recoiler motor. The simplest math for this application without getting into anything too fancy should be Tension(lbs)= Torque(ftlbs)/coil radius. only problem is when its less than a foot then my calculation is thrown off and it actually shows tension goes up until it reaches the one foot mark then it seems to scale correctly. Do I need to scale something else? Any help on this would be appreciated.
-
Dear All, Need your help. I have problem with plc cj2m cpu35. After power trip plc error. Err HE Ip 01..what is mean? plc also connected with one pc using ethernet cable. Any suggestion need to do...
-
Hello Dear Colegues. I am using historian 7.0SP6 (enterprise license). I have installed OPCAE collector to collect alarm and events data from a project in cimplicity in order to have an historical data of it. Also I have checked the Historian OPCAE interface box in the cimplicity project´s properties. The problem is that when I try to see the tags from OPCAE collector on historian administrator I have the following error "No Tags Matched The Criteria You Have Entered. Please Try again or Cancel your Search". Also, I am not able to see the "last 10 alarms in the collector´s configuration tab. What could causing this problem?
-
Hi, how can I get rid of those alarms with status I(O) ? They are simply something like duplicates and they re making it hard to read the logs.
-
Hello Guys, can anyone help me programming of FX5-4LC temperature control module with FX-5U80MT PLC. I want to Read present temperature value of each channel and want to set Temperature Set value from PLC.
-
I am using a Label as a Message Display with Resource Group. I want to do the same thing with my User Alarms, I do not like the Alarm View Popup.....The image is how I assume it needs to be setup. It compiles and downloads without fault, but messages do not display. Any thoughts on what I am doing wrong? I could retype all the User Alarms in a Message Resource folder, but I have a lot of User Alarms.... Thanks,
-
Hi Every one, I have two 2198-P070 bus power supplies for that I’m using for four Kinetix drives, 2 drives per power supply, all controlled by one processor (5069-L350ERMS2). I have an enable contactor setup for each power supply for each set of drives. I have them configured as DC bus groups 1 and 2 respectively. I had the first set of drives working, setup inside the motion group, with no issues. When I added the second power supply and drives. I found that when I added them to the motion group I couldn’t get the enable contactor to close for the first set of drives. I f I took them out of the motion group and made them ungrouped then the first contactor would close but then I couldn’t get the contactor on the second set to close. Do you have any thoughts as to what I might be missing to get these to work? See the screen shots for more detail. Let me know what you think. Also, I have heard that only one motion group is allowed per PLC, but my question is : Can I use sevral axes and Power units in the same motion group?
-
IN TIA Portal V13 HMI Alarm Setup, Discrete Alarm Not allowing Bool Tags in "Tag Trigger". Please help how to set Bool Alarms?
-
Getting this error while adding MC_TorqueControl. I want to control torque from HMI value. Using R88D-1SN08H-ECT drive and R88M-1M75030T-S2 Ac servo motor with NX1P2 PLC. Newbie Here. Please support. Error 1 The Axis parameter of the MC_TorqueControl instruction does not support single-axis position control axes. Program1 Section0 Row 6
-
Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software? I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously. Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
-
Hello We have just purchased some equipment with a Control Logix 5561 (1756-L61/B Rev 13.40). The compact flash card is missing from the unit but the seller says the unit was running in his facility prior to shipping. Does the 5561 have internal memory where a program is stored? Is the Compact Flash used only for recipes and persistent data? Thank you
-
Hi everyone, I trying to develop a logic to control 6 motors. Two motors needs to working and four motor will be in stand by. When one of the two motors fail, one of the four motors will start to work. Another rule is, when one of the motors that is working reach the preset time of working, the controller will stop that motor and start another motor with low working time, and so on. I'm have difficult to solve this problem. Can someone help me, please? Best, R.