Search the Community

Showing results for tags 'View'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 39 results

  1. Bad quality alarms ( FT View SE v8.0)

    Dear Experts!!! I am facing one problem in ALARMs configured in SCADA ( FT View SE v8.0) There are some unnecessary alarms like "acknowledgement status" are coming. Alarm bad quality alarms are coming all the time, I dont have any clue about them. Please help!!!
  2. Friends kindly help me I need to create ton and counter macro function in factorytalk view studio 
  3. Sorry if this is covered elsewhere, but my search hasn't revealed anything yet.  I have a number of PanelView graphics created with FactoryTalk View ME and some use a lot of Parameter Files, which link to popup faceplates. So a large number tags are represented with parameter files, which, when clicked on screen, then pop-up an appropriate faceplate, based on tag type or category etc.  I am still digging into the very elaborate FT View ME manual, but at 500 pages, that's quite a deep study.  But I don't see the linkage between the tag's parameter file and how it specifies which faceplate to pop up, and I've not yet found a good article other than keep digging into that FT manual. There does not appear to be a linkage entry in the parameter file itself, where I would have expected it.  Nor do I see any "hot spot" click type event code in the display itself, which would also make sense.  Is it in the PLC code itself?  I would not have expected that, since they seem to be keeping the FT environment self-contained. But there must be some sort of table or linkage somewhere that I'm over looking. Thanks in advance for anyone's thoughts & guidance on this.  Other parts of FT HMI screen development does seem intuitive, just not this dynamic linking.
  4. Dear automation friends,   I just like to put some issue in the clear that I have seen no reported issues on yet, but it is killing me. Maybe some other people in the world also have this issue. We use Windows 2016 on FT View v10. All patched with all compatible patches (both Windows and Rockwell). We install this software a lot but we only got this issue seen/reported on windows 2016. I never had a Rockwell issue that took so long without getting it fixed. Support is also not really helping.   We just have a setup of Windows 2016 with 2x redundant FT View Servers and about 10x Clients with each 4x screens. The HMI clients run perfectly but every few days, 1 application (on 1 of the 4 screens) just crashes "DisplayClient.exe application crash...". That closes the HMI interface and then the users needs to click on the hmi.cli file to launch that screen again. Refering to ntdll.dll in the windows events. No additional info except for the windows error reporting that is unable to contact the internet to send the crash report. Looking in the FT Diagnostics, it happens while the operator is operating the hmi screen. Not when there is no activity.   We reinstalled 1 client completely from scratch, including the OS, domain integration, everything brandnew. And 10 hours later: crash on 1 of the 4x screens. In a control room with almost 30 screens, this is very annoying and unacceptable.   If you have a similar issue or got the issue fixed, please let me know. If you have a similar issue and don't have it fixed, we can share more detailed logs.   Best Regards,
  5. Hello, I have a .PBW file in an obsolete PanelView that I need to troubleshoot, but I can't open it.  Called AB TechConnect for support, but tech said it was too archaic and he, essentially, needed to start with a Windows98 machine and PanelBuilder 32 to even begin.  FactoryTalk doesn't know what to do with it.  File is attached.  Any suggestions/assistance is much appreciated ABWWTP.PBW
  6. Hello good day ! I have a problem with a Panel View 1000 plus, I accidentally connected this device to 240V and the rv2 of the circuitry has burned. I am not sure what reference this device is but I need to change it as soon as possible, I would appreciate it if you could help me! Thank you
  7. Hi all, Does anybody have experienced problem with communication while connecting  32k and 16k plcs to same SCADA via factory talk linx?   Does anybody have got problem with communication while RSView32 and FTView were used simultaneously with same plcs in different pcs with different shortcut names?
  8. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  9. Factory Talk Linx 6.0

      Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  10. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  11. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.
  12. We have an auto-clave unit purchased at auction roughly 4 years ago.   CompactLogix L32e and PanelView Plus 1000.  All has been working for us until last week.  Suddenly, the program seems to freeze up after around 30 seconds.  I can still touch the panelview and the touches are registered, (the mouse icon moves) but the program does not respond and I can tell the program is frozen because the clock which displays seconds stops counting. When i boot into safe mode (clicking white box on boot) the system does not seem to freeze at all.  I am able to navigate those menus w/o issue.  We don't have any of the software to connect to the PLC.  I understand this is a somewhat broad issue, but does anyone have any idease where i can start in troubleshooting this? or is their any further info i can provide which would be helpful?
  13. I got into a project were they have 20 panelviews plus 1500 around the building, and they want to be able to serrate the displays accessible by the users based on the physical location of the panelview, for example Room1 should not see room2 but can see room3, at this moment we have a complete application with all the screens that have been downloaded to all panelviews, in order to avoid maintain 20 different ME applications I would like to ask if any of you had this problem before or any ideas on how to go forward with it.   Thanks
  14. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard
  15. Is there a possiblity to retrive password from mer file? I wanted to restore mer to runtime with local directory and its asking me for password that i don't have.  Could some one help?  
  16. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain
  17. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached
  18. Panel view 550

    Hello I have a panel view 550 communicating with a micrologix 1500 LRP works normally, I need to change some alarm messages in it, but when I try to upload to the PC I can not. I have no experience with panelview, I have a UIC 1747 and I can see the view panel via RSlinx AB_UIC-1 DH485 STA: 0 COM 5. But when I use panelbuilder 32 to upload only the error. Can anybody help me.
  19. Thanks for your time.  We have purchased from auction a Getinge Autoclave (sterilizer) with Allen-Bradley controls (CompactLogix L32E).  The machine has a PanelView Plus 1000 installed.  A CD came with the machine w/ the following files.. HMI Project - (.apa file) Runtime (.mer file) Their is also a compact flash card installed in the CompactLogix L32E.  On the Panel View, their is an external Compact Flash slot, but no card, and on the inside of the panel view (if i remove the back cover) their is a compact flash card slot with a card installed.  I haven't checked what is on either of those cards yet.. We cannot get the program to load on the panel view. When the machine is powered on, the panel view goes through a quick dos setup screen and then the screen turns blue and we are stuck with an hour glass icon.  The icon will move depending upon where you touch on the screen.  I can boot the panel view in safe mode (by hitting the default button, then reset) at which point I get a message stating that the machines files may be corrupted and leaves me the options to Download new Firmware, or Continue.  Hitting Continue nothing happens, and choosing Download gives me Ethernet, or Serial options.  The Panel View is connected to the PLC via ethernet so I choose this option and it  gets stuck at this point. We do not want to make any changes to the program, but just to get it to run on the machine.  We do not have ANY of the software. Any advise is greatly appreciated. Craig
  20. Please if anyone can help me, recently I installed a redundancy in my Factory View V8.20 server, but started to show some errors: My alarm banner and event simply disappeared and now I can not read tag from my opc server (KeepServer Modbus), I see this tag in the studio, but at runtime they do not communicate. * Patches are up date. Tks! Vitor
  21. I have entered the messages many times into the Alarm Setup but every time i re-open the alarm setup, every message that has the Trigger Value=1 will be deleted.  Anyone have a similar issue?
  22. Would someone please help me how to convert an integer to ascii?   For example if the output tag is an ascii string, of 3 characters and my numeric input is integer.   When user input a value of 5, I would like the input value to be convert and assign to output ascii string tag of "005".  How do I set the conversion format in either tag assignment or tag expression?
  23. Expressions

    Hi forum members!   I am spinning the wheels on trying to get my expression to validate.  I am new to expressions so after trying for a bit I have thrown in the towel and am looking to the experts here to help me out. As you can see with attachment I am trying to change the color of the valve top hat.  I am needing 3 colors: Gray when closed, Green when open and in Auto, and Yellow when open and in Manual. I was asked to not change the PLC logic as this could be done from the SCADA level.. After looking at my application and attempt do you have any suggestions on what I am doing wrong?    My Expression:  If {::[Process]Program:Boilers_Main.LV_36101_New} < 3  Then 0  Else  If {::[Process]Program:Boilers_Main.LV_36101_New} >= 3  AND {[Process]LIC_36101A_PIDE.Auto}  Then 1  Else  Then  If {[Process]LIC_36101A_PIDE.manual}  Then 2
  24. Hi all I am setting up a batch tank system, I have 1 pump which can pump to six different tanks(via pneumatic actuated valves). This is my first go with a HMI, usually I would use a multiple position switch. Is it possible to make a six position selector switch with a HMI? I am using a AB Panel-View 800, has anyone done this before? Any help would be appreciated.
  25. I have this panel view 1000 plus with accounts enabled but customer forgot the app password. I have both the executable and source file. Can I retrieve the password from any of both files? Can accessing configuration mode help disabling security to enter new passwords? Having the files, what is the best way of retake control over this application?    I am not experienced on AB equipment, but have general experience on automation. I have access to Factory Talk View.