Search the Community

Showing results for tags 'Systems Integrator'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 10 results

  1. Hi I have encountered a problem with CX-integrator. I'm not able to open the program. The following message appears:  System error. Save the date and close the application.  (Error code 0035) I have tried to reinstall the entire CX-one packet.  Any ideas?  Regards MBD
  2. CP1L PLC network communication error

    Hello all,   I have a master PLC(CJ2M) which is communicating with slave 4 slave PLCs(CP1L). one of the PLC have communication error, upon checking in cx-intergrator it shows that all the other slave PLCs and other components are connected to network-1 and faulty PLC is connected to network-0. Unfortunately, I couldn't change it as cx-intergrator doesn't allow me to change download the changes. So anyone can please help me with this issue. If you know the troubleshooting way then please reply.    Thanks in advance.    -Yash
  3. I'm an automation tech in a tool and manufacturing facility.  Lately, we've quoted a few projects for customers that include tooling (stamping dies usually) as well as some partial automation.  The automation is fairly simple usually...motor, drive, actuator to transfer material in 2 axes, e.g.  The company president and quoting engineers don't think it's a big deal for us to do this, but I'm a little wary to agree to these projects.  I have 2 years experience doing all sorts of small programming tasks, wiring, control panel design and build, troubleshoot, etc. However, I also know that there are a lot of industry and safety standards to follow when you start machine building/integrating for customers.  The tooling build is straightforward and is our forte.  But we have no electrical/controls engineers, and we have no standards really for automation "builds".  I've done smaller projects for us and I'm trying to develop some sort of standards, but there was nothing like that when I came into this position.   Anyway, should I undertake these sorts of projects in your opinion or not? And if I would, what sort of knowledge/standards should I master in terms of liability and safety, and where would be a good place to start in developing a wiring/electrical schematic standard? Thanks for your assistance. Andrew
  4. Hi, I would like to connect a  Ramsey Micro-Tech 9101 integrator via Ethernet/IP to a Controllogix. I have read the manual from Ramsey and they show that I should add a Generic Ethernet Module in RSLogix and enter the Input Assembly instance and Output Assembly parameters to get it working. I have tried the settings in the manual but it tells me that the Input Size is not correct, tried different values and couldn't find any that work. Could somebody please assist me? I have emailed Ramsey but have not gotten a reply yet and I also contacted their local office here in South Africa but they could not help me.  
  5. We are Atlanta area based automation and electrical engineering company. All the details about us are on our web site. We provide wide range of services and also sell new/used PLC components. Please contact us with any questions!
  6. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  7. .cin file question.

    I'm fairly new to the world of automation so please excuse me if get my terms mixed up. I think I know the answer to this but its not quite clear in the manuals. I'm on a project that has about 9 CJ2H PLCs that we are doing a re-commisioning job. In each of the PLC files we have backup files and the program files. Some of the PLCs have .cin files for CX Integrator and some don't. Some of the files have routing tables as well. We are wondering if we are supposed to have a .cin file for each PLC and that this a must have file in order for the PLC to comunicate with other devices in the network? If each network is supposed to have one this means that we were not given those files from the original owners and then we need to create new ones. I'm thinking that its not a big deal and pretty easy to setup the network configuration. Anyone out there have any experience? Thanks
  8. LM 90 70 Fuction Block For Integrator

    Hi ALL, Am trying to write a PLC code that will register accumulate tonnes from a conveyor weightometer What function blocks inside LM 90 70 can I use to develop this? Need assistance Thanks Chris
  9. I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
  10. We are a Boston local manufacturer of laboratory equipment. We are seeking a full time experienced Systems Integrator. For complete information please visit: http://www.consteril.com/systems-integrator