Search the Community

Showing results for tags 'Serial module mitsubishi'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 451 results

  1. I got it too.
  2. I am needing some help developing a string, and setting up communications that will be interpreted by a printer. I have thus developed my string, setup my com ports on my 1766 micrologix and setup com ports on my schmidt styliner scribing printer with win7e. Essentially this is plc to computer running software for a printer. the software has been setup to the best of my knowledge. My problem is creating a string that will be recognized as start/stop transmission at the printer. I have never done ascii so I am unfamiliar with how to get the two components talking. This is a simple application that only requires writing a string to the printer, but i have tried all that i can without any luck.
  3. Hardware & software HMI - Beijer iX T12B / iX Developer 2.10PLC - Mitsubishi FX5U / GX Works3Error HMI shows "Controller 1: Comm err station 0". i.e., The HMI isn't getting a response from the PLC. IP addresses are all correct and ping (and can be programmed) OK. The HMI software PLC comms configuration has a "port" setting - see below. I can't find anything comparable on the the Mitsubishi software. Does anyone know what insight I'm missing here? iX Developer is configured as shown below: Note the port setting above. I can't find any documentation on what the PLC is expecting or what's special about 1025. The PLC is setup as below with GX Works3: Anyone got any ideas how to get the two talking? Many thanks.
  4. Hi all, Quick question about adding ENET modules to a plc. If I have a local network of a HMI, PLC and 1 device all on IP 192.168.255.x and I have another device across the plant with an address of 171.27.19.x, can I add that one device to the PLC and it will recognize it? Is there a way to add a device with a totally different IP address to a PLC that is already set up?
  5. HI there guys need some help with a project i have on the go, I am having trouble saving multiple blocks as one recipe. I am using a E1043 with a total of 10 blocks each one has a value that has to be saved all into one recipe. I have assigned all the required blocks with the recipe directories. I understand the use of the save and load functions but this seems to only allow for one block been saved (the block with the save icon in it ). I have read alot of the manuals and help tutorials and cannot figure out what is needed to be able to do this if at all possible. Any help is much appreciated and thanks in advance :)
  6. Software: GX Works3 I'm really struggling to understand GX Works online / offline operation. (I know they've been consistent in how this works for the past ten years - but it's consistently bad!) I can't find how to work in offline mode. I powered off the PLC and the software keeps trying to connect. I've cleared the PLC memory and am trying to download the complete program to an FX5U. (I was able to do it earlier. I'm still able to communicate with PLC over Ethernet.) I'm getting:Unable to write target file because it is the following status. (sic) - Unconverted - Converted function block does not exist in FB file. - Converted function block does not exist in FUN file. - Unconverted module label. There are no red items in the navigation tree. There are no errors after a Rebuild All command. What do I need to do to figure out what the problem is? Many thanks.

  7. Mitsubishi GOT password crack

    maniniyot posted a topic in Mitsubishi

    Dear sirs I Need to upgrade an old HMI unit (F900 series) to GOT 1000 series But it has a password and the maintenance personel have no idea ,the machine by the way is almost 20 years old and the manuals are also missing.... Is there a specific software for cracking the password ? thanks in advance

  8. Mitsubishi PLC Unit FX2N Problem

    franzwave posted a topic in Other PLCs

    fx2n-48mr-001 problem. Prog E flashes.Run and BAT. V no light only the Power LED lits..any idea of this error code . what's the possible solution. .tnx
  9. I am trying to set up communications between a Mitsubishi master profibus module and a Mentor dc drive using an SM Profibus DP-V1 module.. I am using GX configurator DP to set up the communications using the SM Profibus DP-V1 GSD file, but no matter what configuration I used on the master and slave setup i still have an alarm on the QJ71PB92V stating that the SM Profibus DP-V1 is transmitting a diagnostic message and the comms is shutting down. When I interrogate the SM Profibus DP-V1 I cant find any errors or messages. ANY IDEAS ON THE CORRECT SETUP?
  10. Hi, again. (I'm getting good support!) Every time I write to PLC it is switched out of run mode. I use Remote Operation to try to switch back to run mode but I get blinking P.RUN indication and blinking RUN light on PLC. I have to cycle the power to get back to run mode. Can I switch to run remotely?
  11. https://plus.google.com/u/0/collection/oCtiX To be continued...
  12. Dear experts, I used this forum for help analyzing our PLC setup in the warehouse in 2013 and feedback from the experts here was very helpful. I would like to offer an engagement as freelancer on our project since we need to cut-out a system which runs out of maintenance in Dec 2016. Please see attachment for details and very happy to receive any questions. I hope this is not against the forum rules as I couldn't find a suitable forum "job offers". Kind regards, Gunter Senior PLC Engineer Japan.pdf
  13. I have a CP1L by Omron and a barcode reader by Honerwell. I want to activate the serial port 1, to connect it with the reader. The reader shoul read one of the 2 main barcodes. If the reader get the barcode 1, then it should read 3 times the barcode A and activate an output; but if it read the barcode 2, it should read 3 times the barcode B, and also activate an output. I want made my programm in ladder programation, How I can activate the serial port 1? How I set the the serial port 1 as an input to the function block RXDU? How works the FB RXDU? How I can set the codes? How I set the fb RXDU as an output?

  14. Syswin v3.4

    JMPI posted a topic in Other Omron Software

    Hello every body I need serial number for Siswin v3.4 or crack. I have original software Siswin v3.1, but i don't find token Someone may help me? Thank you
  15. I am trying to find a way to do a "batch monitor of Global Labels" in Mitsubishi GX Works2 Software. I can monitor Device/Buffer Memory Batch but can't find a way to monitor all Global Label's status online? Can anybody help me on this?
  16. I wish to send a temperature set-point from an Allen-Bradley SLC 5/05 (Ethernet) PLC to a water temperature controller and read back the actual value. [ PLC ]<---------->[ Temperature Controller ] The temperature controller RS485 comms supports protocols for moulding machines from Arburg, Battenfeld, Billion, Demag, Dr. Boy, Engel, Frech, Husky, KraussMaffei, Netstal, Sumitomo, Toyo and ‘Spezial’. They have given me the details for Engel’s Interface Protocol P2 which is 8-bit ASCII. Question: What's my best option for this? Buy a BASIC module? [ PLC ] [bASIC]<---serial------->[ Temperature Controller ] Use the serial programming port directly? [ PLC ]<---serial------->[ Temperature Controller ] Use an Ethernet message to some external programmable serial server? [ PLC ]<----Ethernet---->[serial Server]<---serial--->[ Temperature Controller ] I've modified and debugged A-B PLC code but I'm not very familiar with their hardware. Many thanks.
  17. Dear Sirs/Madams, I am studying to connect between GOT1565 and Microcomputer/PC via RS232 However, I only see the documentation for GT-A900 and GT-F900 So, I'm wan to ask you: Can GT1565 connect with Microcomputer/PC via RS232? Who did it? can you help me? Thanks so much!

  18. Programming Error using QJ71C24N

    Husanto posted a topic in Mitsubishi

    Hi All, I have problem about programming serial module Mitsubishi PLC using QJ71C24N. If I unconnect the cable from the module and connect again it show SIO error and the communication become lost or not sending data again. so i have to restart the PLC to make it normal again. Any other solution for solve this error without restart the PLC? Thanks Husanto

  19. Non-volatile memory GX Works2

    williamj posted a topic in Mitsubishi

    Hi all, Im trying to figure out how to create non-volatile memory tags in GX Works 2 (using a FX3U controller), so that the values stored in the D registers won't keep zeroing out every time the controller powers down. Does anyone have any helpful tips on how this is done? Thanks

  20. Mitsubishi QJ71PB92V and Balluff BNI PBS-507-000-Z011

    semenyuk.serg@gmail.com posted a topic in Mitsubishi

    Hi all! I need advice. I have Mitsubishi Q02UCPU with profibus module QJ71PB92V. I try to connect communication module from Balluff BNI PBS-507-000-Z011 via Profubus without success. Everytime I connect module, I see diagnostic alarm "The parameter transmitted by the master is incorrect". All settings were made by default. QJ71PB92V has 0 adress and Balluff BNI PBS-507-000-Z01 has 11. I connected this module to the Siemens CPU-315 and it is work correct. From this forum I see it is common error. What will be the next step to check or solve the problem? I am not profficient in Profibus networks, so I will be appreciate for any help!

  21. Help with carwash / FX3

    jrrice72 posted a topic in Mitsubishi

    Can anyone help with a carwash program? I am currently a student and having a very hard time getting this to work. I am using GX2 software. Any help would be greatly appreciated. Jeff

  22. Connect OMRON CJ1H to GSM modem

    AlexCyril posted a topic in CX-Programmer

    Hello guys, actually I am new to this Omron PLC. but i have small project to transmit a command to the GSM modem via the RS232 port so it can trigger the modem to send text msg. Can you show me the steps/guide/sample program to accomplish this program coding? I already read some topic in this forum regarding to this PLC RS232 port but still cant get the ideas when to create the ladder program. PLC Type : CJ1H (CPU65H) - RS232 port First input to trigger the GSM send text msg: AT+CMGS="+YOUR HP NUMBER" Second input to trigger GSM send text msg: YOUR TEXT MSG CONTAINS (Ctrl+z to send) Many Thanks, AlexB

  23. ModbusRTUdemos.zip

    RussB posted a file in PLC Sample Code

    Version

    601 downloads

    There are two Proficy ME projects in the zip file one for VersaMax and one setup for 90-30 CPU364 but is the same for all of the 90-30 processors, but read the Manual GFK-2220 to get the correct port information for your CPU and configuration. They are both working and well documented. They were done quite a while ago but I do not recall what version of PME is needed to open them. It is my recommendation that we all use the latest version. Good luck and have fun with it. R~ <))>(
  24. File Name: ModbusRTUdemos.zip File Submitter: RussB File Submitted: 17 Nov 2014 File Category: PLC Sample Code There are two Proficy ME projects in the zip file one for VersaMax and one setup for 90-30 CPU364 but is the same for all of the 90-30 processors, but read the Manual GFK-2220 to get the correct port information for your CPU and configuration. They are both working and well documented. They were done quite a while ago but I do not recall what version of PME is needed to open them. It is my recommendation that we all use the latest version. Good luck and have fun with it. R~ <))>( Click here to download this file
  25. Hey guys. New to the forum and new to plcs. I am running into problems quick, fast and in a hurry. Please be patient. I have created a new project. I have added module 1756 ENBT because that is what I will be connected to. On the chassis there is another ether net card which runs to a switch. That switch runs to a 1734 aent card. I have added this module, 1734 aent, as well to my project. Now I must add a 1734 IB8S and a 1734 OB8S. These are not appearing in my list. I proceeded to download and install these add on profiles. After installation, however, I can still not select the I/O modules. Why is that? And how do I fix it? Thanks in advance, HotPie