Search the Community

Showing results for tags 'Screen Design'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 33 results

  1. Omron NA5 Screen Saver - Custom Image

    Good afternoon, I'm trying to add a custom image to the screen saver on the NA5 HMI, has anyone had experience with this? I can get to the screen saver setting on the device but there's only "Blank" screen as default, but I'd like to add my own image instead. Can anyone help? Thanks!
  2. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  3. Twin HMI screen set up

    Hi, I am trying to set up a Twin HMI system on a machine. (screens on each side mirror each other during operation) I have a GE Versamax Micro Controller PLC and two 10” Quickpanel+ HMI screens. This is a newer version of one of our older systems that operated in the same way, the only physical difference is the serial cable arrangement as the old system used 8” Quickpanel HMIs with different connectors. HMI 1 is connected from COM1 via RS232 serial cable to Port1 on PLC. (Connects and interacts with PLC ok individually) HMI 2 is connected from COM2 via RS485 serial cable to Port2 on PLC. (Connects and interacts with PLC ok individually) There is a Cat 5 Ethernet cable between the HMIs. The software for the old system works with the new set up and the ViewNetwork consoles on the HMI screens appear behind the ViewRuntime and display the neighboring Target screen and their IP connection details. I have adapted our latest single screen machine software into a Twin screen version in the same way as the old software as far as I can see but with the newer software the ViewNetwork consoles are blank with No target connections. Each screen interacts with the machine ok but they do not mirror last data or page selected from the other screen etc. as the old version did. I have been through all the options I can find in the old software and set the new software the same but with the same blank ViewNetwork console. What settings do I need to adjust to enable each HMI to mirror the other and see each other through the ViewNetwork consoles. Any help will be greatly appreciated. Thanks in advance,
  4. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  5. Troubleshooting NS8 Hmi

    Good day sirs, i would like to see your help with this our company owns multiple HMI Omron NS8 it seems that this unit always break in the site. we fixed one of the unit but it is only showing white screen is this possible that there no CF connected inside the HMI? ( note i was newly hired by the company wanting to help my superiors) thank you in advance everyone
  6. Nematron DOS software

    We have an older Nematron system we are working on and requires some software. The system uses DOS 6.22 and launches Screen Ware 2 software and the Reliance DCS V1.01 to talk to the Rockwell AutoMax PLC that uses the Programming Executive Version 4.2. We have the Nematron parallel port keys (dongle) needed and are looking for installation media for editing. We also need information on the executables that open the screen files the ULTRA MAIN MENU is not available to us. We are interested in viewing the config for upgrade so even software that is newer and capable of converting and reading the program is fine. Any help is appreciated!!
  7. Hi, I would like to know how can I change screen using PLC program for the HMIST6400.
  8. I need to change the screen when a specific block receive a signal. For example when Q output changes voltage state from 0 to 1 I need to automatically go to another screen. I am very new to the software so detailed explain will be more helpful. Thank you.
  9. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  10. Greetings I have an HMI in the form of an industrial PC, is ok to use an SC09 programming cable (8 pin DIN mini to USB type) as a permanent means of communicating between the FX3U PLC and industrial PC's USB port?   I am avoiding going through the trouble of buying a DB9 connector type for the PC end due to budget limitation. My CPU also doesn't have an ethernet card, i don't want to buy one either. i have already tested the connection and it works, i just want to understand the drawbacks of communicating via USB instead of ethernet or traditional serial.
  11. Control Panel

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
  12. Hi all. I have a Kinetix 350 and an AB TLY servo motor. I'm using the drive's STO function. AC power is supplied into the drive, passing through an "M1" contactor. It makes sense to m e to keep that contactor open, preventing AC power to the drive, until the drive is fully awake.  Is that what you guys do? Someone suggested to me in another forum ( http://www.plctalk.net/qanda/showthread.php?t=121021&highlight=drive+awake ) that there is no reason not to supply power to the drive right away because the STO function is inhibiting power to the motor anyway. 
  13. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  14. What Is Meaning Of Universal Analog Input Card?
  15. Helo All, Thanks for your support on my previous quiry. Iam now facing an issue with rotation animation of a motor in factory talk view. I have a screen containing 5 motors and good number of numerical displays. Numerical displays need to be updated just every seconds ,so i changed screen updation rate in SCADA as 1, changing so decreased my motor rotation speed. so do i have any other option to change motor animation fast keeping numerical display screen updation rate as 1 second?? i have used the tag  syste/blinkfast  
  16. Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
  17. HMI GOT1030 Windows Screen

    Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.  
  18. GS2107 BASE SCREEN

    I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2  superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings.  
  19. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  20. I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  
  21. GOT2000 GT Designer3

    Hi, Is there any way of changing the background color (or pattern) of a Base Screen using Screen Script. The screen doesn't seem to have the same object script options as other components. Or is it hidden away somewhere?
  22. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  23. Hey Community, i would like to know if its possible to change the designe of the keypad in FTView which pop up at entering a numeric variable. There is a screenshot in the attachment. Thanks in advance!   Mit freundlichen Grüßen, Best regards Adrian Düringer  
  24. pcb design of sc09

    can any one provide me detail of pcb of sc09
  25. I am working on project which is using Micrologix 1400 and AB Panelview. I am using FactoryTalk View Studio to build the HMI. The PLC needs to know which screen is displayed on HMI so some additional functionality can be activated. How would this be done? I was looking where could I write screen number to N7 location in the PLC or set a bit in B3 area but could not find anything. Thanks for your help.