Search the Community
Showing results for tags 'ST lite'.
Found 4 results
I put together a system a couple of years ago with a L306ERM with I-O, PanelView, etc and I was sold Studio 5000 Lite to program it. It worked out ok on that project but now I have a project that I need to use a Powerflex 525 VFD and the software won't let me add the Powerflex. I've tried several different PFs and none can be added. It crashes at the Create button and puts out the wonderfully descriptive message of "Unknown Error" Email AB support. As of 4-1-21, AB doesn't take emails for Powerflex drives. Anyone know if the Lite version of Studio 5000 will work with a Powerflex 525?Thanks you for looking.
RV3.0 posted a topic in MitsubishiProfibus Function Blocks for Q2ASCPU for Melsec ST Lite RIO inter-connection. Please assist in advising the attainment of such blocks - if any existing. Thanks
JanHrust posted a topic in MitsubishiGood day I have a scenario where I need to connect to Ethernet ST-lite units to an L-series PLC. With a Q-series you will use the Modbus card and create a Intellgent Function Module to do this and specify the header addressing for the unit. With the L-series, you have Modbus on the build-in Ethernet port, but how do I now setup and specify the addressing for the for the ST-lite unit? Please help...
Hi I need a little help please with networking through ST Lite. The scenario. I have a Q03UDECPU (Ethernet CPU) PLC which need to connect to STL-ETH1 (ST-Lite unit) unit and then also to the LAN for the MAPS SCADA to be able to read it. Now the STL-ETH unit has 2 network ports that I can use. However, I need to know if a daisy chain type of configuration will work. Basically LAN --> Port 1 on ST-lite and from Port 2 -- PLC and then back the same route. Is this possible? Reason for this is because I only have 1 network connection available from the LAN.