Search the Community

Showing results for tags 'Output and Communication Boar'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 229 results

  1. Output polarity selection

    franciscoazzad posted a topic in Other PLCs

    Hello to everyone. Nice to meet you all. How are you? I hope you are doing well. I’m developing a program with the purpose of make something similar to a pulse train in the output. However, sometimes I need the output to be a “positive” pulse and sometimes a “negative” one. By positive and negative I mean the polarity in relation to the pulse train source. I’m trying to use a pair of bits in order to switch between the two choices of polarities. I attach a simplified version of the ladder diagram I’ve made. When I thought about the logic, it seemed logical to me, however, it isn’t working as supposed. SM0.4 is a pulse train source. According to the software manual, it is a pulse train with 50% duty cycle and a cycle time of 2 s. That it to say it says at TRUE for one second and return to FALSE for another second. I assign the value of that variable bit to the M0.0 memory bit. I get the negative version of the pulse train logically negating it in the Network #2.                 I assign the value of two inputs, I0.0 and I0.1, to other two memory bits, M0.1 and M0.2. ·         When both inputs are in a FALSE state, the output stays FALSE, disregarding the state of SM0.4. (Case #1) ·         When I0.0 is TRUE, M0.1 is TRUE. However, Q0.0 stays at FALSE no matter SM0.4 is TRUE or FALSE. I attach a pair of pictures. (Case #2) ·         On the other side, when I0.1 is TRUE, M0.2 is TRUE. In this case, the output shows the correct behavior. It is the negated version of the pulse train source. (Case #3)                 Has any of you experienced something similar? Is there a better way to execute my purpose?                 I’m not executing the program, just simulating it with KincoBuilder from Kinco. However, it has always worked fine for me. Thanks for you attention. I look forward for your responses. Kind regards!

  2. HOSTLink read multiple DMs

    tingxing posted a topic in Omron

      Hello,    I am using Hostlink protocol to read data from PLC units. for example @00RD22220001..., will return DM2222's value. But I want to know, if I could read multiple DM values at the same time. for example: DM2222, DM3000, DM4000, reading these DMs with one communication. Please note that these are not continuous DM areas. I know a sequence of DMs can be read by specifying starting address and count.   Many thanks in advance.   Ting              
  3. Here is a post that we recently completed on the Automation Direct USB to RS485 Adapter.  The USB-485M is a 2-wire USB to RS-485 serial communication adapter for RS485 use. It does not require an external power supply or complicated configuration. It has a Type A (plug) USB connector for the computer side and a universal female RJ45/RJ12 modular connector. This will accept RJ12 and RJ45 plugs.  The USB-485M supports multiple baud rates and is USB V2.0 Compliant. Read the rest of the post... YouTube Video on the installation and communication to a Solo Process Temperature Controller via Modbus RTU. https://www.youtube.com/watch?v=aWE05ZNZNXw Let me know what you think, Garry www.accautomation.ca  

  4. RS485 COmmunication

    zubair136 posted a topic in Mitsubishi

    Hi all, i am looking for a solution to connect 7 plc with a single scada. is it possible according to my topology diagram ?   Kindly make me suggestion and if you have any information regarding the solution then share .   Thanks in advance. 
  5. Good Morning,   My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. 10.181.3.104 is lift station 104, 10.181.3.105 is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ?   
  6. Hi all, I am trying to communicate KEPServerEX with FX3GE vis UDP protocol. I have tried but unable to get data on Kepserver. While configuring communication properties in PLC we have configured PLC IP, PLC Port, Destination IP, but unable to find correct Destination Port. Although we tried various port nos like 49320, 57412, 57512, 56233, 1025, 32402, 57212, 57012, 57612, 57812 but there was bad quality data using UDP For same PLC using TCP/IP we were able to read all tags properly. This change in communication protocol is required as there are some PLCs whose communication port drops after few days of connection establishment (no error logged; can be re established with just restart). Someone from Mitsubishi said to try communication via UDP as it continuously fetch data regardless of kind of response received. If anybody has tried or have any solution, please do share.   Thanks
  7. Hi, I managed to communicate a Kinco HMI with a Xinje PLC (XC3-48R) using RS-232. Also, I've established connections between the both equipment and my personal PC, for programming purposes. Currently the uploading and downloading, PLC bits reading and writing happens normally. But, when I disconnect any of the equipment from the PC, (HMI or PLC), the communication is lost between the PLC and HMI.  How can I solve this and, remove my PC from the network by making the HMI master and PLC slave ?    The software I use for programming is, (XCP Pro, Kinco HMIware)  

  8. FX3GE Communication issue

    vikrantragit05 posted a topic in Mitsubishi

    Hi all, There's an issue I am facing for multiple FX3GE PLCs in a plant. Communication breaks between a PLC and OPC server. PLCs after few days (4-10) does not respond over ethernet. No ping response is received over network as well as when checked one to one direct connection. If I restart the PLC the connection is resumed and again after some days it goes down. Error LED on ethernet port does not glow red (no indication for error). If anybody has faced similar issue and has resolved, please share.

  9. Serial communication with KINCO PLC

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.

  10. Memory registers on KINCO PLC

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. I hope you are doing well. I have a KINCO PLC HP043-20DT. I'm communicating through free-protocol instructions XMT and RCV. The manual states that memory registers SMB86, SMB186 and SMB286 contain information about the state of the reception instruction. I would like to ask if any of you know of the existence of an analog register but with respect to the transmission instruction, instead of the reception. The manual does not indicate it and I could not find any information online. I've sended an email to the manufacturer but, until now, I have not receive any answer. Otherwise, how could I search for this information? I tried through the manual providede by the manufacturer, but maybe there is other way. I would appreciate any information. Thank you so much. Kind regards.
  11. Hello guys, how many (maximum) analog inputs/outputs can CPU 1215C can reach without any issue?   I try to search in google but can't find convincing answer.  Thanks for your help.
  12. Hi Guys, I need to send temperature data from PLC to LED Display through RS-485 communication, so How can I proceed further in this. Please guide me Thanks in advance

  13. Fatek PLC Communication Problem

    zubair136 posted a topic in Other PLCs

    hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me   as it looks like port is already used by another program . and i dont know how to kill that program ..       
  14. Hi everyone, To explain the problem a little bit: I have 2 systems that are equal, they have 1 PLC, 1 Inverter and 1 Servo Axis (Image01). The devices are connected via EtherCat. The thing here is tht in these systems the PLC and Servo Axis is the same but the inverter is different. My goal is to have the same project on both systems and depending on the inverter detected use the correct program. What worked: If I add the 2 Inverters and 2 Servo Axis on the project on different nodes (Image02), I can detect which is present using the variable _EC_EntrySlavTb[n]. My issue is that if I want to make more replicas of the systems using different inverters I will eventually hit the Axis Number limit for the PLC while in reality I am only using on Servo Axis at a time. What I wanted: I would like to be able to control 1 Servo Axis with 2 different inverters (only one active per PLC) (Image03). What I tried: The axis parameters can be set using a variable of the type _sAXIS_PARAM, however it seems that the option to change the axis basic settings is not available (Manual: NJ/NX-series Motion Control Instructions Reference Manual (W508) page 5-58) (Image04). The axis basic settings is where the definition of the output device plus control words are set (Image05). Is there a work around to solve this issue? I would really like to avoid having to manually change the output device for the Servo Axis every time I make an update on all the systems.   Best Regards, BR  

  15. Reading inputs using FINS/TCP from a PC

    franckcl posted a topic in Omron

    Hello, I'm trying to read data from a PLC using TCP/FINS protocol. I am able to read the data in the memory area from a supervisor PC (using command 01 01) but I do not know how to read the information specific to this machine. Extract from the machine manufacturer's document: Name Data type Address/Value Usage comment Loc_in1 BOOL 1.00 In Local Input 1 Loc_in2 BOOL 1.01 In Local Input 2 Loc_in3 BOOL 1.02 In Local Input 3 UPS BOOL 3.00 Work UPS Input Int1 BOOL 3.01 Work Interlock 1 Int2 BOOL 3.02 Work Interlock 2 T1_LSB CHANNEL D20 Work UPS Hold time LSB T1_MSB CHANNEL D21 Work UPS Hold time MSB REM_1 BOOL H0.00 Work Remote input 1 REM_2 BOOL H0.01 Work Remote input 2 REM_3 BOOL H0.02 Work Remote input 3   This is the document I've written to understand the protocol: 1st frame to send: 46,49,4E,53 : ‘FINS’ 00,00,00,1A : Length(8 de l’entête + 18 de la chaine qui suit) 00,00,00,02 : Cmd (2) 00,00,00,00 : Error code (0)   Second frame to send 80,00,02,00 : ICF + RSV + GCT + DNA 0F : DA1-FINS node address of Ethernet unit (Server node=15) 00 : DA2-Destination machine address (0=PLC Main unit-CPU) 00 : SNA-Source FINS network address (0) FB : SA1-FINS node address on the PC side (Client node=251) 00 : SA2-Source FINS network address 01 : SID-any data from the source process identifier 01,01 : MRC,SRC-FINS command code 0101: Read memory areas 82 : Memeory area=Variable type: DM (Dxxxxx) 00,14,00 : Read start address (20) 00,01 : count (1) This shoud send the UPS hold time but everything is at  zero. Who could help me ? What is wrong ? Thanks  

  16. Delta plc AS228R

    sarel posted a topic in Other PLCs

    hi i have a as228r delta plc and i want to connect it to two endress & hauser D400 flow meters over ethernet can anyone please give me sample code for ispsoft. the flow meters do have ethernet connections.  i want to read flow rate and flow total on the flow meters  please thanks

  17. Monitouch HMI slow screen

    Robror posted a topic in HMI & SCADA

    Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!
  18. Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
  19. I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.

  20. Omron PLC Python communication

    Yash_Trivedi posted a topic in CX-Programmer

    Hello All,    I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it.  I have attached the master PLC communication setup for the reference.    Any kind of lead/help is appreciated.    Thank you in advance.    -Yash

  21. QJ71E71 100

    ALMIGHTY79 posted a topic in Mitsubishi

    Dear Anyone. Anyone can help me. How to communication two plc Q SERIES MITSUBISHI.With QJ71E71 100.It Can Read/write .Can Show me. example instruction command ladder.or parameter CPU 1.D0 to d300. CPU 2 D400 to D700. Two Plc can Communication  read / write data register. Thanks you for your attention.
  22. I have an analog output card 1734-OE2V. As a default, there is selected fault mode as 'Go to Low Clamp'. I am using output range -10V to 10V. What is the value for Low Clamp. Is it 0V or -10V? If I want it to be 0, do I need to select 'use fault value' and set the fault value to '0'.
  23. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.

  24. FX3U Output

    fabio_fabio posted a topic in Mitsubishi

    Hi,   we have  a FX3U 128 PLC. I connect 24V to COM and all the output in the partition Y0, Y1,.. have 24V even if some output are ON and some are OFF. Why?
  25. I need to use digital outputs of PF527 drive. Controlling the outputs, it does not do anything. Relay outputs are working fine, but opto outputs do not work. For the outputs, there are relays connected, using pin 6,7 and 17.