Search the Community

Showing results for tags 'Offline test'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 12 results

  1. Hi All, As a system integrator coming from an Allen-Bradley based environment to a Mitsubishi based environment (GX Works 2, Q series PLCs), I am used to doing this with Allen-Bradley PLCs: when you hit save while online, you are prompted to upload the values in the tags and can save these values and view them offline - which is useful when doing modifications and analysis offline, as well as backing up settings in case your PLC dies and has to be replaced with a brand new one. I was wondering if anyone knows if there is a way to store the current values of the devices in a Mitsubishi PLC to my PC along with the .gxw  file that is saved when doing a "Read PLC"? I am aware you can set up a File Register but it seems to only save ZR devices as well as specifically designated "Extended Data/Link" D and W devices, but most data is not stored in these devices. Thanks
  2. EN2TR and substation modules are all dropped, EN2TR module indicator is normal, The module ok indicator in the rack flashes, From within 5000, the en2tr and the modules in the rack are all disconnected, Power off and restart normally, have you met any friends? Ring, redundancy, almost 10 year project.
  3. Hallo everyone, i have a logix5561 PLC wich control a pumpsystem. The Pump is driven by a linear Motor. I need to perform frequency tests on the system. So first of all i  want to know how i can generate sine wave with this controller? I google it but didn't find any valuable information.   Can i perform such tests without additional hardware?  thanks for your replys! 
  4. Hello, I'm trying to execute the loopback test on the RS-422 built-in port of GX3GE-40M. I connected the TxD pins to RxD pins (+ to +, - to - ). I'm trying to use the function rs2 (later the plc should communicate with a bar code reader). I have tryed all possible connections, to see if the PLC can read the signal as well as transmit it. It manages to transmit the signal, but I cannot get it to read it. Could someone help me troubleshoot if the problem is in the program portion?  I'm working in GX Works2 Thanks for any and all help test_plk.gxw
  5. Pls any one help me to simulate my omron HMI program with CPM 2A PLC  Means help me to communicate cx designer with CPM 2A plc Or with NT- series  support tool
  6. Hi every one, I'm new here. Is there any CC-Link IE field basic master or simulator that can be use on Windows PC, for testing  CC-Link IE field basic slave communication ?   Thanks in advance    
  7. Hello folks,   I am a rookie, self-training in PLC programming. I have written an SFC exercise (attached ACD file). I also try to call STL written subroutines and add-on instructions, from within the SFC main program. Calling the created subroutine works fine, but calling the add-on instruction fails from a reason which is above my level. I tried, tried and tried different solutions, with no avail. I am either wrong in writing the add-on (perhaps some missing but missing tag ?), or wrong is calling it. Can someone please give me a hint on what I do wrong ?   Thank you, Radu PS . I use Studio 5000 v24, combined with RSLogix 5000 Emulator.     SFC_trial.ACD
  8. Start Ladder Logic Test

    Hi, there! I had got GX-Developer Ver.8, which is very different from the plc programs that I have learned before. I have read many tutorials and watch it but I still don't know how to start ladder logic test. Many other people simply click on 'start or end ladder logic test' but mine was greyed. Anyone has solution? Or I just missed a couple steps of simulation? Though it is very basic problem, I will put a deep gratitude for your reply.
  9. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  10. Save on development time by having a copy of your target system on your bench.  Develop the target code in a local environment (coffee handy of course)  then deploy with high confidence.  Systems built to order.  
  11. The text in the labels in my project, that look nice and smooth-edged in the CXDesigner design area, look very pixelated in the offline test window. There is no anti-aliasing at all, so it seems. Does this mean they will look very pixelated on the terminal screen itself? Or is the offline test window a poor representation of what it will look like on the terminal?
  12. Hi, I have a challenge with GX developer version 8.63R (SW8D5C-GPPW-E). I'm trying to verify 2 projects (offline). Some programs I know there are changes but they are not shown in the verification. In 1 program I did see the last checked change was in step 1496 (next change I did see by manual check was step 1502. it seems like this type of verification is limited to 1500 steps to check. Is there any way I can make this offline verification work? the most progams that we have in our project are over 2000 steps. big thanks in foreward