Search the Community

Showing results for tags 'Fatek timer counter second'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 94 results

  1. How to count to 120000

    I’m using a Omron CJ plc. I have a press that I need to count the shots up to 120000. I know that the. CNTRX is limited. So does anyone have an example of how to set this up? 
  2. Hi. I'm looking for a way to display on an Omron NB7W HMI, the elapsed time that a machine runs for. So if a machine runs for 6hr 32 minutes the display will be "6:32" It sounds simple but i must be missing something. Can anypne help please?Kind RegardsPaul
  3. Endless Timer

    Hi all , I'm new on Mitsubishi , so i've some problems. I need to write an endless timer. *I have to use just 1 timer. *If click start;     -1s later 1st lamp    -2s later 2nd lamp (together)    -3s later 3st lamp (together)    -4s later 4th lamp will be on.    -5s later they will be off.    -6s later it will start again from first step. Please help me...   
  4. Hello, I am no to programming.  I have a timer that counts up output from 0-12, the resets back to zero.  When I shut off the input, I want to reset counter to zero. What would logic would I use for this?   Thanks Doug
  5. GX Works 3 Timer (TON)

    Hello, please help me deal with this problem. Mitsubishi GX Works 3. I can not understand why the TON function block does not work correctly. I need to set the timer in minutes, but if I set 55 minutes, the timer doesn't start and an error appears. How do I make a timer to avoid this? Going through the values, I found out that this happens with the numbers 55-110, although at times large numbers work adequately. t_0 - DINTflushing - TONapplyNewTime - Bit
  6. when doing program, sometime really need a long period timer, I used to use RTO retentive timer, that can make 69 minute time delay. but recently I got problem. the production runs 24x5 hours, I have to keep one of my program function to monitor the equipment fault, I could not get the plc time by using GSV. the system time doesn't work. (all the other production lines, the system time work well, only this line 1769-L30ER 5330ER) By calculation, one day is 24x3600 seconds, six day is 144x3600 second, so I use CTU to count the every second, and use the CTU.ACC as relative time record.  If the production line runs five days with no stopping, the counter will count to 120x3600 second, it's long enough to keep the monitor on. once the line stops, reset the counter to zero. waits for next starting up.     S. Green
  7.    
  8. how to set up timer in st

    Hello all I m new in st programming in omron I want to use timer in st please help me regarding this
  9. I have set up a timer in exostructure expert basic and am trying to get the contdown value from the preset of 20 to show in vijeo designer but it tells me the %tm0.v is read only and cant find the variable in Vijeo designer to show it. Does anyone know how to do this?  
  10. Can You explain me how can I reset a Timer so that after completion of the cycle, it automatically starts again from 0 sec in CX Programmer? I am working on a program for a Oxygen PSA Plant. In which the valves of 2 cylindrical tanks switches at a specified interval and the cycle keeps on repeating. Thank You.
  11. VHSC5/C

    Hey all. Wondering if anyone has an example program they'd be willing to share? Specifically I'm using the 1734-VHSC5/C with a 1769-L18ER-BB1B PLC. All of Rockwell's wonderful information only refers to SLC-500 platform. I'm not trying to do anything terribly fancy, just have a quadrature encoder attached to Channels A & B, then using an output to turn on a valve at 8.0" and turn off at 10.0" Any help would be appreciated.
  12. I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.  
  13. hi all, i am tring to program my fx1n on to a bag machine where there is a sensor which checks if the bag length is correct by stopping at the appropriate print also we have given a +5 or -5 to check if the print has moved and if moved to cut the bag from where the signal comes. when the colour sensor is off the plc moves the servo motor the the measure we have given and cuts no problem there but as soon as i give it to check the signal from the colour sensor the plc shows different length when i monitor and also it moves past the print and only stops. it seems its not stopping at the interuption. the colour eye is working we checked. if someone can help it would be greatly appreciated. if you can give a small ladder program which works would be even better :)
  14. Hi, I have found this forum extremely helpful in the past.  I greatly appreciate in advance any help/direction. I am having trouble simply placing/invoking a PRV instruction in CX-Programmer.  The program seems to not recognize really any of the High Speed Counter instructions.  (working with a CT021.  I/O table correct, CJ2H CPU67 PLC rack powered on with all green lights.) Please see attached screenshots for what I mean... the PRV, PRV2, CTBL, SPED, etc instructions just show up red (like they are not understood/recognized PLC instructions/functions) when I try to place in the ladder.  There must be something simple that I am not considering.  Thanks again for any help. Michael
  15. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.
  16. Fatek PLC Communication Problem

    hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me   as it looks like port is already used by another program . and i dont know how to kill that program ..       
  17. Using HOURM as Retentive Counter

    Hello Guys,  is someone using HOURM as a Retentive Counter ? I Tried it but i have no success. like this one: HOURM( Betriebsstundenzaehler_ein , 700, Betriebsstundenzaehler , Platzhalter1 ); I'm using FX5U. Our old Programm was written in Ladder.    
  18. FX1N sprinkler system control.

    Hello!  I have an FX1N PLC that I want to use to operate a sprinkler system.  It should have two functions.  1. 1x30 minutes of operation every day.  2. 3x10 minutes of operation every day.   Thanks for the help.
  19. Hi,     I'm trying to communicate Omron CP1E unit with PC via serial port using hostlink protocol.  I need to read the Timer/Counter SV value and write the timer/counter SV values to the PLC.  I'm able to use other C mode commands (like RC (timer/counter PV read), WC (timer/counter PV write) etc.) but when I give the command for Timer/Counter SV Read 1 which is R#, I get the response as IC (Undefined Command).   How do I write or read the timer SV Values?  Example command and response : @00R#TIMH001028*  (TIMH is the high speed timer, 0010 is the timer number and 28 is the FCS) Response: @00IC4A* Is is that CP1E doesn't support these commands? If so what is the equivalent command that I should send inorder to perform this? Please help.  
  20. FBs-CBE distortion

    Hi every one After sending some command to plc using fatek FBs CBE module , router internet connection goes off and internet LED turn red. i mean it works fine for a minute.. then internet connection of router will be off...  why this happens?
  21. Hello My emulator go to fault state as soon as it goes online and runs (Within a second) and the following error  Code 01, (May have been caused by an infinite loop, a complex program, or a higher priority task.) The same logic runs perfectly fine on a colleague's laptop  I'm using  RS Logix 5000 V30.00  Emulator V30.00.01 Running on Virtual Machine, Windows 7 Host system specs are:  8 GB RAM  Core i5 CPU @ 1.80GHz Socket 1 Cores 2 Logical Processor 4 Windows 10 Virtual Machine's specs:  4 GB RAM  Number of Processors: 2 Number of Cores per Processor: 2 Kindly suggest a suitable solution, what is the possible cause of this fault.    Thank You  
  22. Hi guys, I just starting to use Sysmac Studio. Its a bit confusing as I am currently used to CJ series PLC. Usually, we can use P_1sec, P_0_2s and so on to create a simple clock pulse timer function. However, I couldn't find the command or FB to do that in Sysmac Studio. Anybody could explain on how to do that in Sysmac? Thanks 
  23. HSPsO

    I am using fatek FBs 32MN PLC. i need to run the nema stepper motor synchronized with induction motor's speed with some ratio. in my case the speed of stepper motor will change as the speed of induction motor changes its speed, may be many times in a second. Problem is that the speed of stepper will be constant as before until i have to disable and then enable again HSPSO function. is there any solution that i can dynamically change the speed of stepper without disable and enable HSPSO function ?
  24. Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same. i am unable to fetch counts...   Encoder: 500ppr, 24V line drive, A-B phase,  PFA datasheet
  25. Weird Timer Behaviour

    Hello, I've been using a Beckhoff PLC and TwinCAT3 lately and I'm learning how it all works. Currently I'm using a ton timer in my program and I've noticed some weird behaviour. The timer.IN is set to true and afterwards I check for timer.Q in an IF statement. That statement should therefore only be true after the timer.PT delay value. However, the first time after I activate the configuration and timer.IN is set to true, timer.Q is immediately set to true for a very short amount of time. When I reset all values and try again without reactivating the configuration, this doesn't happen. I'm thinking that I don't initialse the timer in the correct way or something along those line. I have attached a code snippet. The problem I'm encountering is that the first time after I have activated the configuration and the tonTimeout.In is true. The following IF statement is also true without having run for the delay time. This sends my program to an error state. However, after resetting the values this doesnt happen anymore. Can anyone help me with this matter?