Search the Community
Showing results for tags 'Fast to Buy'.
Found 4 results
PLC is old one, but I need to add one feature, Signal can be very short and when I get it I want to stop auto mode. I am afraid that signal can be so short and skipped by normal input. How I can set input as an interrupt input. I read that PLC has events processing and it can be triggered by " inputs 0 - 3 of position 1 module, on rising or falling edge" - in first slot I have card TSX DMZ 64DTK. ( 32 inputs and 32 outputs) is it true ? - and how I associate it. Maybe I create new Events and as an input I use f.e %I1.0 or I configure it somewhere? thanks for help
Hi All; Does anybody here have a copy of Fast tools 10.02. It can like Citect be run for 1 hour in demo mode which is ideal to asses its capability. We are looking at having to use it but would like to review in demo first. Local Distributor is not providing much assistance.
SpicyChili posted a topic in HMI & SCADADear Fellow Forumers, I am having a common problem with sending/writing data to all Modicon 140CPU53414A PLCs from our Yokogawa Fast Tools SCADA. For Example, when I write a Value(at first, value was "FALSE) "TRUE" to a modbus register, after few seconds it went back to "FALSE" and after a few seconds again, went back to "TRUE"(at this time, this "TRUE" value sent to PLC) We are using here also Ethernet Module 140NOE77101 which we used also to all PLC with Modicon 140CPU67160 but no issues like this occured. Is there any adjustments that should be made for the PLC? in Yokogawa Fast Tools SCADA, We tried to increase the value for SIGNAL_GAP(a file is attached for description) from 20 to 200(nearly maximum which is 240bytes) and writing/sending data is now ok but not all the time, so sometimes it is still having issues like that. Thanks!
Now introduce a new product, Kinco HMI MT4414TE-CAN from FastToBuy.com This HMI use 32-bit RISC CPU and streamlined LINUX kernel, you can display a variety of true-color graphics format, and its superior processing speed and software to meet the needs of most users. and with a memory 128M FLASH + 64M SDRAM. The Kinco series HMI configuration editing software (official version): _Kinco HMI software_V2.2_Build131108 is Automatically installed in this product. View more info click here