Search the Community
Showing results for tags 'Camera'.
Found 3 results
All, I am using Keyence CV-X422A vision controller for my application. It is interfaced with Siemens S7-1500 PLC on PROFINET. I am able to communicate with Vision controller through PLC logic command and status IOs. There is some communication issue in updating the o/p values from Camera Controller. I have tried with & w/o Handshake Mode with these settings. The camera display shows the reject but camera never turns ON the NG Status o/p. I tried different things told by Keyence Tech support but none of them worked. He told me to have you enable the “Result ACK Flag” in the bit allocation area and send a signal to it. Then trigger it again with a no good part and see if that fixes the issue. I tried setting the “Result ACK Flag” to 1 after I get the “Command Complete Flag” for the trigger signal that I sent. Sometimes this works but still it is not reliable. Do I need to send only a pulse to “Result ACK Flag”? Anyone here has ever faced similar issue? Thanks for your help. AP
Hello, New here and first post because i'm not sure where to go but, i'm looking for someone that I can talk with that is familiar with pulling an IP cctv camera video up with Wonderware's Intouch HMI based off of a door trigger. The catch would be that I need to do this with an IP camera that does not support ActiveX but does support RTSP. any help or direction would be great. The application is for a large county jail. Thank you and have a great day! Eric
I have camera Keyence connected via ethernet to the S7-1200. In the cameras can be set about 30 "tools". Each "tool" perform a different function in the image. In what way in the program code on S7-1200 I can read eg Tool number 10? For example, if tool 10 is the correct I want to to value 1 on some tag for eg camera_tool1. Thank you in advance for any help. Regards Mikołaj