Search the Community
Showing results for tags '4-20ma'.
Found 5 results
-
Hi,I want to read transducer signal on PLC.I am using 7kg60008ab/nn transducer and it's analog (4-20mA) output is connected with analog meter.Can I connect the transducer current output (4-20mA) signal to PLC analog input in series with analog meter display???So that I can read the value on PLC simultaneously with analog meter?
- 3 replies
-
- analog input
- analog output
-
(and 3 more)
Tagged with:
-
1734 IE8C 8 Channel Analog Input scaling
jpratik92 posted a topic in Allen Bradley / Rockwell Automation
Hello all, I have a temperature sensor with a reading range of 10F to 212 . The input card I am using is an Allen Bradley 1734 IE8C 8 Channel Analog current input. The current input values are 4-20 mA. Currently I have my raw low at 4000 and raw high at 20000. Can anyone explain how do we go about selection of this values ? I found these values in the configuration tag of the input card properties. Thank You- 2 replies
-
- allen bradley
- rslogix5000
-
(and 3 more)
Tagged with:
-
CJ2M RTD PT100 4-20mA Temperature Measurement and HMI display
Hartech posted a topic in CX-Programmer
Hey, I have a project which one part involves using a RTD PT100 (0-100 Deg.C 4-20mA) connected to a CJ1W AD041 (ATD input card), the PLC is a CJ2M Basically the PLC needs to read the RTD and display the temperature on a Omron HMI (NS10), via Ethernet, Could someone please help me out with a basic example program - to read and convert the RTD - ATD value to store in memory. Your help would be most appreciated. Thanks Richard -
Hi erveryone, i'm new to the world of plc but very eager to learn. i'm currently working on a project that requires a vacuum pump to be driven at 4 different speeds. The pump is hooked up to a VFD and what i was wondering is it possible to create ladder code to make DA1I send different 4-20mA signal to the VFD to get the different speeds? This is my first project and its probably a little over my head but i'm keen to give it a go. thanks
-
I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
-
- Cx Programmer
- Cx Integrator
- (and 8 more)