Search the Community
Showing results for tags '1747-SN Remote I/O'.
Found 50 results
-
Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of 1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor. plz help..Iam a beginner in this field.
-
I am in the middle of doing a retrofit for a old PLC5 and i decided to upgrade it to a Control Logix. With how much I/O I was needing the price of the system was going to be very pricey. So I decided to use my main rack as a control logix and use Flex I/O for my remote racks. I have never put together a Flex I/O rack so I am unsure of what I need for this rack other than my I/O modules and a communication module. Could someone give me a list of what is needed for these systems?
-
I have multiple PVP 1500's on the same network. From the one in my control room i need to be able to see what user is logged into what HMI. How would I address the system tag of another HMI on the same network would I use the IP address? thank you for any help in advance -
Was wondering if anyone can tell me whether it is possible to use the Red Lion Graphite displays to remotely log into your system via Ethernet for programming. Can it be used as a bridge to other Ethernet devices connected to it?
-
Good afternoon all, So I'm stumped, we have working a SLC 5/03 with 1746-HSTP1 module running a automation direct STP-DRV 80100 driver and 34127D drive. It is in command mode,(bit 15) CW lS used (bit 0) Home limit switch used (bit 4) home prox used (bit 5) pulse and direction (bit 10) Word zero set for -31696 Everything works great except the homing option with prox. It always travels at base speed. What am I missing? Being very new to this im surprised I got this far, lol. I have read the manual several times over but clearly missing something. Thanks in advance
-
Hello, I am trying to connect a Weidmüller UR20 Ethernet I/P (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word). When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.
-
Hi everyone - my first post here. I have a customer with a SLC5/01. The controller is 1747-L511. Battery seems good. The fault LED is flashing. I tried to connect to it using RSlogix500 and I got this message (photo1). I selected 'Load From EEPROM' and got this notice. (photo2) Customer has the printed ladder but I can't tell which data types are what. everything is just numbers - no B's, no I's and no O's. the timers and counters are just numbers too. Luckily the printed ladder has a cover sheet, which led me to the PLC2.(photo3) The rack has two 8 channel inputs and 2 8 channel outputs. I would like to replace everything with a micrologix 1400 or something, if I could translate the code. Can anyone advise on this matter please?
-
Hi friends , recently i ve been doing some diggings about remote IO cards, in my factory we have a CJ2m PLC and it communicates with remote IO cards with four numbered words (2080.00 , 2080.01, 2080.02....2080.15 ) and there were several dip switches on the IO cards, which were set but i can't understand what was the basis of that settings. So I'd like to know how these dip switches behave and what are the uses of them ?? and how is it possible to have 4 numbered word bits ?? pls help me someone to clarify this, i tried internet, but cudnt help myself !!! thank you Here I attach one of the pictures i took of one of the remote input cards.
-
Hello everyone, can u help me out please, quite urgent !!! :( i have GS2107-WTBD HMI display along with FX5U-80MT-ESS, i had one of HMI designs made on GT designer 3 by earlier designer (not in my contact now). i uploaded the graphics to HMI module and later it stuck to the initial LOGO screen and doesnt move further, moreover the HMI is not communicating with PC. i suspect it had remote password with it how can i remove this issue or hardware rest the HMI with factory defaults guidance required
-
Hi there, I’m not sure how familiar most of you are with Wago remote I/O, but I hope you may have some solution for the following connection problem I’m having. I’m working on a project to modernise an old folder collecting machine for which I’m using an Omron CJ2M Cpu33 together with 8 Wago 750-352 remote I/O units over ethernet/ip. These Wago units all contain two 8DI digital input cards and two 8DO digital output cards alongside a 750-610 bus power supply card. Adding them to my network in CX network manager is no problem and all seems to work fine. That is, as long as I don’t physically add the bus power supply card, which I need to, well.. power the Wago bus. Soon as I add this card (which was in place while making all the necessary settings to the Wago and Omron units) it just won’t connect. Remove it and it connects like it should. As far as I know the power supply card has no I/O addresses or other communication functions whatsoever, so I can’t get my head around it. Even stranger is that when instead of it I add an analog input card, with bus power connections build in, it connects without a problem. The .eds file only contains info about the main Wago unit, after installing it I should be able to add any kind of I/O card and address them in the Omron software. Also, the supply card is added and visible as a fifth card in the Wago I/O settings and the I/O status led is green during this error. Therefore I would say the problem is at the Omron side. Any sugestions? Thanks in advance Andy - The Netherlands
-
Micrologix 1400 reverting to Remote Mode on its own
jspobuk posted a topic in Allen Bradley / Rockwell Automation
Hello, As the title indicates, we have a micrologix 1400 that has been installed for a long time. Recently it faulted out on 71h and was in Remote Mode. Do these PLCs revert to Remote Mode when in a fault condition? We placed it back in Run Mode and everything worked fine, but how did it get to Remote Mode in the first place? Thanks, J -
Hi there, I'm wanting to connect a panelview 800 to an SLC5/03 the SLC is connected to an 1747-AIC which is run to another 1747-AIC. I'm trying to figure out what cable I require to connect the peripheral of the second AIC module to the panelview. I can't seem to find any reference online. Any help would be appreciated. Image attached to clarify.
-
I have been tasked with pointing our FT View application to a remote SQL server for all data logging. I'm having some issues getting this to happen. I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance. There must be a setting I'm missing. For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times. Any direction would be appreciated.
-
AnyViz - the cloud service for your PLC
Mirasoft posted a topic in For Sale, Employment, Services or Wanted
AnyViz is probably the easiest way to monitor, operate and analyze your PLC remotely, thanks to the cloud from any location. No need of additional hardware or software licenses. More info at www.anyviz.de Functions: Real-time process data visualization with just a few clicks Record and analyze machine data easily Targeted Condition Monitoring Remote control - from anywhere in the world Connecting machines, beyond location boundaries Access with any modern browser and any kind of device like notebook or smartphone Have a look at our YouTube Channel to see AnyViz in action. -
We have a PLC that controls a diverts for cartons. The PLC talks to a host to get the divert code and then this is used to trigger diverts through device net. The issue we are having started back a few months. We are getting good scans and the information is being sent to the host and back, but cartons are not diverting 100% of the time. If we remote connect to the PLC and have the program open, the issue goes away. When we disconnect, it issues occur again. The PLC has a wired connection through a network switch. Is this a problem with the PLC or with the network switch or somewhere higher up in the connection? If it is the switch, why does the issue disappear when we are connected? We are remote connecting with a laptop and the connection we use is wireless.
-
Hi Im working with an iQ-R CPU wich controls 6 conveyors with a CC-Link IE Field Network, the CC-Link module is a RJ71EN71. Each conveyor has a remote I/O (NZ2GF2B1-16TE Digital outputs main module with a NZ2EX2B1-16D extension for Digital Inputs). The communication in the CC - Link IE Field diagnostic appears to be OK, but I can´t send or receive IO signals from the Batch Monitor of Gx Works 3. Thanks for your attention!
-
Hello, I have a Mitsubishi Q02U PLC connected through its serial port to a GS2107 hmi located on the same control panel. I need to add an additional GS2107 exactly the same as the first one at a distance of 80 meters from the control panel. How can I communicate with this new HMI ? Is there a special module to add to my configuration? I really dont know? Please advice. Thanks
-
Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
-
I have a version 5.01 SDN card and would like to update it to version 6.02 but cannot find the firmware upgrade files on Rockwell's site. Does anyone have a copy that they can provide or direct me to where I can find it? Also, is it possible to update the firmware on this card using the pass through devicenet driver as this card is in a chassis with a SLC5/05 CPU which has an ethernet port. Thanks.
-
Hello, I'm from Poland. I would like to use the Sony Xperia Z to communicate with Omron NB screens using free software Omron HMI Remote Viewer. Unfortunately, I can not install this software. The attempt ends with the message "Your device is not compatible with this version". Android have software version 5.0.2. Does anyone in this matter can advise me something? Thank you in advance. Bogdan
-
Hello, would like to change some ideas with you. I´m working in a new project and need convert an SLC500 to Controllogix, with a 1747-AENTR is possible create a SLC500 Eth remote.... but in my case i have two 1746-A13 (conected by expansor) and can´t add all the modules in a rslogix5000 aplication. In the 1747-AENTR manual say that is possible in the v21.00 of the rslogix5000... I really need install this new version? Don´t have other way? Thank you! Vitor Prado
-
Hii guys, I have AB SLC 500 CPU 5/03 and 1747 PIC cable... I wanna make configuration. from where i haev to start.? I have no any idea about it... even i have no drivers for cable...from where I could get all solutions... Guide me ASAP.....thnx
-
1734-FPD needed between relay output module and analog input?
python01 posted a topic in Allen Bradley / Rockwell Automation
I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks. -
1747-SN Remote I/O M-File "mapping"?
sharkster411 posted a topic in Allen Bradley / Rockwell Automation
Hello, I'm working with some old Allen-Bradley SLC5/04 systems with 1747-SN modules. The module is located in Slot1. One system is only using the RIO module for a PV1000. How do you know where the "M-Files" for Analog I/O modules and/or Panelviews are located? I see programming using locations such as: M1:1.810 where 60 words are being copied from a Remote I/O PV1000 to some words for the SLC to utilize, but I don't understand why "M1:1.810" was used instead of, for example, "M1:1.800"? I looked and so far cannot find information pertaining to the words other than what is in the User's manual, and it doesn't address this issue. The panelview in my example uses all of Logical Rack 0, Full Rack addressing. Any help would be most appreciated. I have very little experience with the RIO stuff because almost everything I've worked with in the past has been Devicenet. -
Compact logix - change IP address remotely (over ethernet)
SHorcher posted a topic in Allen Bradley / Rockwell Automation
I need to change the IP address of an existing PLC. Only access I have is remote (VPN). Is there any issue with downloading the same program - with the IP address changed - to the existing processor? Then change the local network range to match, etc...
