Search the Community

Showing results for tags '1000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 23 results

  1. Password!!

    HELP! Does anyone know how to change this setting from password numbers to letters and numbers?  Much appreciated Matt R  
  2. OS SECURITY ISSUE

    HELP! I have been tasked with setting the security levels on this GOT 1000 HMI on GT Designer 3, i have come into a problem and this error message keeps appearing: "Delete OS from GOT since authentication does not work if OS for Operator Authentication is installed". I have recently with success set the password levels on a new HMI GOT 2000 and was able to create a log in and log out switch within the program so i understand the procedure.  Please see the picture below and i will appreciate any information.     Matt R 
  3. which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN)  PLC ? PLC has 9 Pin D Male Connection.
  4. mitsubishi nexgenie plc target settings View File This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,    Submitter lionheart86 Submitted 01/18/17 Category Demo Software
  5. Hello everyone, I am a newbie with PLC. I have a Micrologix 1000. The last time I connected with RSLinx easy, however, I change it to DH485 (I do not remember exactly). And now I can not connect it to RSLinx, I tried many times for all types of drivers. Please help me. Thank you very much.
  6. Would someone be so kind as to document a method to clear a fault on a Micrologix 1000. Does one need programming cable and software or is there another method to clear a fault to see if it returns? regards.  
  7. Hello good day ! I have a problem with a Panel View 1000 plus, I accidentally connected this device to 240V and the rv2 of the circuitry has burned. I am not sure what reference this device is but I need to change it as soon as possible, I would appreciate it if you could help me! Thank you
  8. Does anyone have the User Manual for the Modicon Plus 1000? Trying to program a "ReadOut" template to show the value of a PLC-5 Integer file. Keeps saying that the "N" is not a valid file type. I've done this on the Cutler-Hammer PM1000. The Modicon will not allow the C-H program to download, says it's not a C-H product. Thankx in advance for any help
  9. Hello I would like to first let everyone know I am new to the world of troubleshooting or programming plc's . What we have is a SLC500 system that is connected to a Panelview 1000 HMI via the DH+ network. The issue we have is the panelview displays a gate that is suppose to be closed at as gate fault. When i connect to the plc the ladder rung shows that the gate is closed. To show various positions of the gate the programmer used N13:70 as gate opened and N13:71 as gate faulted and N13:72 as gate closed. When i checked the logic it showed the bit N13:72 as engaged or true if you will. This logic is in the ladder rung that is labeled PV Status which i take is the status the HMI reads so my question is why does it show GF when it should be reading GC. Ive searched all through the logic and it doesnt appear to be wrong here is the logic the best I can simulate it  ladder 6 rung  53  instruction is  XIC O:13.0/11 and OTE N13:76/0 (Gate Open ) and the branch is XIC I:5.0/11and OTE N13:76/1 (Gate Fault) next branch is XIC N13:3/11 and OTE N13:76/2 (Gate Closed which this section is green or highlighted or true which ever you like) when i looked at the input XIC N13:3/11 this is what I found is that this XIC is on ladder four rung10 and has the following XIC T4:154/DN and branchoff that is XIC I:5.0/11(gate opened)XIC I:6.0/11(gate closed) which these two inputs are false or not lighted the output is OTL N13:3/11 and it is true which makes the previous rung true showing the gate closed. So why is the panelview showing the wrong position. I even went as far as resetting the HMI and the PLC so if anyone has a helpful hint I would greatly appreciate it.
  10. Does anyone know a way to convert GOT 2000 screens to a GOT 1000? 
  11. Cable pin configuration required.

    Required cable PIN configuration for Nexgen 1000 series PLC, MS-40M-E, NT11-SF121B-EV1 , GT1020-LBD.  
  12. Dear all, i have using nexgenie 1000 cpu for my new project. but i am not able to connect with codesys v2.3 . I have installed target file T1.4 and T2.4. trie with both. Now i have doubt with communication cable. I have used standard RS232 Cable with 5and 8 Pin short. Kindly suggest the correct one. Thanks in advance
  13. How to connect Micrologix 1000 With Weintek MT6070ip HMI? i Can't connect my Allen Bradley Micrologix 1000 With Weintek HMI...
  14. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain
  15. CVS file log not generated.

    Hi guys, Yesterday I posted a question about how to create a trigger for a log. Now I have the next problem. I created my log, loaded the Logging firmware on the GOT but the CVS file is not generated. Can someone tell me what i'm doing wrong? I am attaching all the settings and the PLC part of the program. I want the values of ZR1200 ZR1204 and ZR1205 every time they change. They are recipe values. I tried also putting a button to create the log file on the HMI. Did not work.  
  16. We have a sterilizer w/ Allen Bradley controls which we bought at auction.  It has a panelview plus 1000.  It came with a CD containing .mer and .apa files.  I was able to load the .mer file via the configuration screen by using the external CF card.  When I run the application, their is a login button in the bottom right which when pushed brings up a user/password screen.  We do not know the user/password for this.  Is it possible to find the password by somehow reviewing the files.  We do not have any software, and do not want to make any changes to the program (rather than changing the password).  I've attached the files in case anyone can help. Also, was i correct to load the .mer file??  or should I be using the .apa?  I followed these instructions here. http://www.judiwa.com/2010/10/05/how-to-copy-panelview-plus-application-with-compact-flash-card/ Thanks for your time PA1525_PVP1000.mer PA1525_PVP1000.apa
  17. Hello every people, I am working in to project with one PV Plus 1000 (2711P-B10C4A1 with Logic Module 2711P-RP1A), one KF2 and PLC 5/15, I have finish logic of PV 1000 and PLC 5, but the communication not good , this is the configuration made:       NODOS PLC 5/15 have address nodo 11 KF2 have address nodo 60 PV Plus 1000 have address nodo 0 PINOUT CABLE  DB9 (PLC) -- DB15 (KF2) 1--5--7  --->   8--6--7 DB9 (PV 1000) -- DB25  (KF2) 2--5--3   -----------------> 2--7--3 I wait for your help   Thank you         
  18. Version 1.0.0

    807 downloads

    This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,   
  19. I have this panel view 1000 plus with accounts enabled but customer forgot the app password. I have both the executable and source file. Can I retrieve the password from any of both files? Can accessing configuration mode help disabling security to enter new passwords? Having the files, what is the best way of retake control over this application?    I am not experienced on AB equipment, but have general experience on automation. I have access to Factory Talk View.
  20. Hello,  I am getting this fault when I am trying to load one of my program and set to run mode.  I have the same plc and I have not had this problem again. 1761-L16BWA Any suggestions ? I think this plc is older than the other I have. 
  21. Hello A-B Guru's, I have a small station with a Micrologix 1000 controller in it. Keep getting a "Major Halt Error S:1/13, Invalid STI interrupt set point. Refer to S:30." It is a very simple program, not using the STI instruction. Have a filter on the processor power. Nothing crazy going on, on the station, no big coils, etc. What can I do to prevent this fault from occurring? Can I add a line of code to always unlatch S:30? What should I do? Please help.
  22. Hey guys, so for a while I've been wanting to get a little PLC for home that I can play with and just have some fun with. I don't know exactly what I will do with it, I mean I live in a 1 bedroom apartment in Minneapolis, so I don't exactly have a large workshop to set up projects, but maybe some home automation type stuff. I'll probably set up a little test board with din rail and terminals and just mess around with it when I get bored. Anyways... so I wasn't sure what to get. I've always liked Allen Bradley, but the licenses are so expensive, obviously. But now with my current job I have to take my laptop home in case someone needs support on one of our machines, so I have RSLogix5, 500 and 5000 software/licenses installed on my laptop, so I can just use that. So I was looking at my options. I was thinking about getting an Aurduino or Raspberry Pi, but I kind of wanted to stay with Allen Bradley since that is what I use at work, and I may as well learn as much as I can about that. Well anyways, 2 nights ago I had a few too many drinks after work and I was browsing eBay for used PLCs and I bid on/won a MicroLogix1000. It seemed like a good idea at the time, it says its fully functional, it has free shipping is only $85, and since I already have the software... So what are your guys' thoughts on the MicroLogix1000? To be specific, the one I bought was the: 1761-L32BWA MICROLOGIX-1000 Besides the software and the computer cable, is there anything else I will need? I don't need expansion cards with this, unless I want, because it has i/o built into the controller, correct? I will just need a 120VAC and 24VDC power supply? Thanks!
  23. Ken Roach already answered this question for MicroLogix 1200, I'm trying to find the same answer for MicroLogix 1000. DF1 half-duplex communication gets dropped with MicroLogix 1000 slaves. I monitored the data, and found the slaves stop sending ACK, and the master stops sending ENQ. Slaves still send valid responses, but these responses are ignored by master because the ACK is not present. Power cycle solves the problem, but that's a hassle to drive out to remote sites. Power cycle to master sometimes solves the problem, but not always. Messages are initiated by the master, not by the slaves. Rockwell support said the only solution is to cycle power. Ken's approach was to monitor CS0:17, if it changes issue an ACL command. See previous topic: http://forums.mrplc.com/index.php?showtopic=22686 Thank you!