Search the Community

Showing results for tags '.net Framework is not install'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 6 results

  1. G9SP Configurator

    I am at a client site that has a line with multiple Omron G9SP-N20S safety controllers installed and I need to make a modification to the system.  I tried to install the Omron Configurator and it asks for a serial number, and will not install without one.  Omron said that it is on the CD that ships with the unit, but the equipment manufacturer did not supply any of the CDs.  The only Omron solution is to order a replacement CD, that will take 5 days, which is 5 days too long as there is a hard stop in 2 days.  I have tried entering numbers found on the controller, with no success.  Does anyone have a better way, special contacts at Omron, to et it faster?
  2. For some reason the latest will not install on my main computer. I have turned off the ineternet condom and it will still not install. Any thoughts? Have tried straight install and download and install and file Smc1704_0101 appears to be the problem - the o0ther files install OK.
  3. Just completed a licensed install of CX-One on new computer. Everything installs fine and auto-update completed. When trying to open S[tructured] T[ext] function blocks I get the attached popup. Control Panel indicates Microsoft.NET Framework 1.1 is installed. Have tried downloading/installing latest Microsoft.NET Framework 4.5.2 . Stlll no success accessing ST Function block code. Any suggestions how to resolve this?
  4. There are five steps installation, wiring and inspection of Delta HMI DOP-B03S210. Before using this delta product, please read the DOP-B03S210 instruction sheet to ensure correct use. You should thoroughly understand all safety precautions before proceeding with the installation, wiring and operation. Please observe the following precautions: 1. Install the product in a clean and dry location free from corrosive and inflammable gases or liquids. 2. Ensure that all wiring instructions and recommendations are followed. 3. Ensure that HMI is correctly connected to a ground. The grounding method must comply with the electrical standard of the country (Please refer to NFPA 70: National Electrical Code, 2005 Ed.). 4. Do not disassemble HMI, modify or remove wiring when power is applied to HMI. 5. Do not touch the power supply during operation. Otherwise, it may cause electric shock. If you have any questions during operation, you can contact us customer service. You also can download DOP-B03S210 PDF Format from FastToBuy.com DOP-B03S210.pdf
  5. Omron CJ1M-CPU13-ETN to .NET Framework

    Hello People, In my school we had an assignment to program a Sorting machine using an Omron PLC and CX-Programmer. Now we got the assignment to make an HMI that we can open on our own computer (Windows 8.1) so that we can control various things of our program, such as reading and writing bits, and other data (To the PLC obviously). Now I only have very little experience in reading and writing data from a PLC (Using a PC), I have used the libnodave library to connect to a Siemens S7-300 PLC. With this I managed to read and write bits, and also read and write data to a DataBlock. We wrote this program in Visual Basic 2013 using the .NET Framework with the libnodave library as an added extension. Now I have searched far and wide on the internet but have not come across any good examples of how to do this with an Omron PLC. So I hoped that I could get some advice from you guys. What I'm asking is if anybody here has maybe a link to a guide/ example program/ manual that could get me forward? And if I can easily get this done with Visual Basic, by adding an extension, could anybody tell me which extension this would be? And where I could find it? I appreciate any help. :D Thanks in advance, BitsNBytesRookie
  6. Hey guys. New to the forum and new to plcs. I am running into problems quick, fast and in a hurry. Please be patient. I have created a new project. I have added module 1756 ENBT because that is what I will be connected to. On the chassis there is another ether net card which runs to a switch. That switch runs to a 1734 aent card. I have added this module, 1734 aent, as well to my project. Now I must add a 1734 IB8S and a 1734 OB8S. These are not appearing in my list. I proceeded to download and install these add on profiles. After installation, however, I can still not select the I/O modules. Why is that? And how do I fix it? Thanks in advance, HotPie