Search the Community
Showing results for tags ' use plc’s channel 0 (serial) or tcp/ip interface module(s) to have as many mb tcp/ip devices or serial devices. (some limits apply based on system configurations'.
Found 174 results
-
Beginnerproblems FX2N-48MR, FX2N-232IF Read/Write over Serial
feuertaenzer posted a topic in Mitsubishi
Hello At first - sorry for my bad english. I have a FX2N-48MR with a FX2N-232IF and i only want to watch the X and set the Y over RS232 with a Crestron Contolunit. I use GX Developer 8 on a XP Laptop and figure slowly out how it works. I read the manuals i found, managed to send from the PLC to the Serial Program on my Laptop (Program named HTerm) But i do not figured out the sending. Can you give me some hint? Greetings FT -
Hi! I would like to know how I could send information throw serial RS232 communication. I mean, I have CJ1M-CPU11 connected with ID232 and OC201 modules, and I have an optic sensor (digital input). When the sensor turn on, I would like to be able to read the information (on/off) with an application like Putty (I have the PLC connected by RS232) to develop an application and show the information on another framework. I don't know if I have explained very well. Thank you!
-
HI , Thanks a lot for the reply & help on previous topic. Now i setting up a new system with 2x CJ2M CPU13 and 2x SCU32 and the connection via 1000M RS485 cable. May i know the best communication to use for the serial communications? Regards, TJ SHARON.
-
Please let me know if it is allowed to sell PLC hardware on your forum. I accumulated lots of Omron hardware that I want to get rid off. Here is the list, I have several of each type, asking $12 each plus shipping. All in working condition. Base Unit C200HW-BI051 Base Unit C200HW-BC101 16 Point DC Input Module C200H-ID212 16 Point Digital Output Module 24VDC C200H-OD212 Power Supply Module C200-PA204
-
Dear all, the following error happened with me as following 1-power cut happened 2-rack with DO wasn't working "meaning no DO on plc module or from PLC but from function was active & some DO was blinking very fast" action I took 1-after more try change address for DO module from H/W configuration with spare DO "using Rewiring Option" worked well but I face the following error "i don't if problem was new or related to last action' error on counter module FM450-1 I/O access error and error on FC40 "System function for counter module" no change in H/W wiring in field was done any one need more data can ask DO & FM not on the same rack CPU416
-
PLC-5 BTR setup screen for manalog input module
jrsiscool posted a topic in Allen Bradley / Rockwell Automation
HI I'm using PlC5/20 when I click on setup screen on the BTR block (to view the analog input configuration) i find the following message: No modules exist in the IOconfiguration for this R/G/M however the analog input signals is running properly....i just want enter the setup screen for configuration. I'm assuming that I need to enter I/O module in the I/O configuration? Can I do this without taking PLC to Program mode? -
There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf -
please can anyone tell me how to set A1S68DAV analog output module parameters , such as voltage output and resolution? or is the parameter can't be set at aLL (ie, fixed at -10V to 10V)?
-
ok running into a issue here, so we were able to communicate with the processor to download a program. transfer went fine. upon cycling power, we can no longer connect to processor. we used LM90 for the software. i've tried removing the battery and shorting out the "mem clear" points on the board, however we can no longer communicate with the CPU. we have a POWER and OK light solid on the power supply. kinda stumped here if anyone has any insight.
-
I need to replace MTA10 interface. How to transfer program to another one?
-
Two FX3U-485ADP-MB One Modbus Master and Other as General Purpose Serial Port
ritz2610 posted a topic in Mitsubishi
Is it possible to use FX3U-485ADP-MB as a serial port to send and receive user defined string/data to and from a computer? I have a FX3U-32M PLC and two FX3U-485ADP-MB adapters. I have been using PLC with one adapter as Modbus Master. Now i want to use both adapters, where one will be Modbus Master as usual and the other I want to use to send and receive data to and from computer terminal (Example - Realterm). I have a third party 232/485 converter which works really well. Lets me just describe my requirement straight forward. I want to display process parameters on a windows computer based user interface (UI) and also set some variables in PLC from the same UI. The UI has access to serial ports of computer. -
hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
-
using ZP.PSTRT1 for speed control and speed change control during operation in QD77MS2
diraemon posted a topic in Mitsubishi
hallo everyone ...i use mitsubishi Q00UJCPU and QD77MS2.. i try to make a speed control program and the speed wants to be changed during servo operating, i use dedicated instructions ZP. PSTRT1 (axis 1) and have tryed but it was only successful to change speed with "change speed control" function once ... is it like it? cannot change "change speed control" many times when servo operations? -
Rotation animation in Factory talk view
Lakshmi posted a topic in Allen Bradley / Rockwell Automation
Helo All, Thanks for your support on my previous quiry. Iam now facing an issue with rotation animation of a motor in factory talk view. I have a screen containing 5 motors and good number of numerical displays. Numerical displays need to be updated just every seconds ,so i changed screen updation rate in SCADA as 1, changing so decreased my motor rotation speed. so do i have any other option to change motor animation fast keeping numerical display screen updation rate as 1 second?? i have used the tag syste/blinkfast -
I am new to Automation Direct software and how the programs are written. Can anyone explain how they handle the analog outputs? My processor does not support the IBox that makes life easier, so I am having to do it the old hard way. I understand most of the logic of how its done for sending data to one channel but I don't understand how the channel selecting works. Can someone give me a programming example or explain how that works? I am looking at the online manual that Automation Direct provides for you for the analog module but I am having a difficult time trying to wrap my brain around how they do their analog stuff ><
-
OMRON CP1E communication with ESP8266/Arduino/PC Terminal using Serial RS232C OR USB
Chinmaygarg posted a topic in CX-One
I have OMRON CP1E PLC and I want to read memory address of PLC via serial communication. I want to use ESP8266 OR ARDIUNO OR PC Hyperterminal Please help me in any direction. How I should proceed? -
Hello everybody, I want to make controll system. I have a problem with a choice and costs. Allen bradley distributor sent me £10k proposition(I've bee expected 15% of that money:D) This is my specs: -10 Analog inputs [0-10V] -7 Digital inputs [24V] -1 Analog input [4-20mA] -19 PT100 inputs -5 Analog outputs [0-10V] -9 Digital outputs [24V] Maybe you have an advices for a components?
-
Hello, i'm newbie for plc. i want to ask about PC/computer send data to PLC CP1E with serial communication (RS232). my wiring cable is: PC PLC 2 2 3 3 5 9 4&6 7&8 4&5 and if i send data from PC to PLC, my indicator in COMM is blinking. i think the cable have no problem. but if i send data from PC to PLC, the memory is not same as what i send and whatever i send data, the memory didn't change. i will attach my ladder diagram. what should i do? New folder.rar
-
Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out. iQ-F Customer News regarding FW Update 08-2018.pdf
-
Hello. Anyone ever seen a button disappear on an hmi. This button is to unlock set values to be adjusted. All I done was restart the panel and it will not show up now. A little lock shows up where the button would he
-
Hello every one. I have three FX3U plc needed to be communicate over a wireless network. I'm using serial adapter FX3U-485ADP. I got E-byte data trans reciver E-30 for wireless communication. Now need help to setup the whole thing. Previously the PLC's serial connectors were connected through a flexible bus but when the platforms are running fast there is interruption in the communication. So we want those PLC's to be connected over wifi. Thanks in Advance
-
good evening. Someone can give tips on how to configure and physical the application with the following items: Advanced Interface Converters (AIC +), PanelView800 2711R-T7T A and MicroLogix 1500 Programmable Controllers My doubts are about the configuration of the communication, and I have doubts about the physical environment and protocol to be used.
-
Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form. http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
-
Hi, I have a self-bought usb-serial cable converter for CP1E. Currently can't connect to my PLC using PC. CX-One says "Failed to the PLC". I am supposedly to use "SYSMAC WAY" as my Network Type in PLC settings? EDIT: The CPU type is N30 I've checked the following settings: 1) COM number is correct ( as checked from windows Device Manager side) 2) Cable driver is installed, there is no "unknown" driver in my windows Device Manager 3) My RS232C LED in PLC is not lighted up. Any other suggestions to check settings ive missed out would help, other than buying a new cable for the moment. Regards, Summerstone
