Search the Community

Showing results for tags ' mitsubishi compact'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 363 results

  1. Dear sir, i want sample program for modbus tcp for q series plc
  2. High-Speed Counter Input

    Hi, I working on reading impulse from the input. I am using M8000 as a contact, on the coil [C235 K9999] and it is working fine on the lad, but the problem is I need to applicate sth like that in structure ladder but I dont know how. I found function on the image below but it is for FX3U. I know that 2-phase 2-count input use OUT_C(for example EN True| CCoil CC251| CValue K0) and then DMOV(for example EN True| s CN251| d D100), so is there any method to read impulses from the input? .Thanks in advance. PS I have Mitsubishi FX3G series.  
  3. Hello everyone I have a FX3U mitsubishi PLC with a fX3U-ENET network adapter and I want to connect this PLC to the KEPServerEX 6 system but it marks me communication error, they are inside the same network and it has port 5010. mitsubishi 500p1.500b | unable to read from address block on divece. the divice reported an invalid address an error.| address block = 'M3008' to 'M3023'. mitsubishi 500p1.500b | unable to read from address block on divece. the divice reported an invalid address an error.| address block = 'M3000' to 'M8015'.   I need you help.   
  4. Analog Scaling Problem

    hi there. i am using FX2n-4AD for measuring the volume of tank in litres. The problem is that litres tank can hold is 10,000 .  and card resulation is max 1000 digital value for 20ma. so conversion factor 10, 000 / 1000  = 10liter for one digital raw value . which is much more as program will read for multiple of tens factor.. can any other solution for this problem with the same hardware  
  5. Hi everyone,  I am trying to use Kepware to communicate with my PLC setup which is the iQ-R Series R08PCPU.  I read the documentation which is available at https://www.kepware.com/getattachment/3daf1ac3-5c76-49ce-bbfe-f0fb1015f6cc/mitsubishi-ethernet-manual.pdf I read through the setup for Kepware and the setup procedure for iQ-R series but it still didn't work.  From the documentation, it said something about "using special ladder logic to enable ethernet communications is required.", I couldn't find anything about this online.  Here what I did in addition to the documentation: - Enabled IP Packet Transfer - Ping the PLC's IP Address which was successful Does anyone have any idea what I didn't do to establish that communication between Kepware and R08PCPU?  Thank you in advance. 
  6. can i replace an existing fx 3g 32mt es plc to fx 3g 32mt ess plc with out altering the sink/ source logic of components connected to the plc.?A servo ,vfd is operating with this plc..
  7. I have a line that I'm integrating that requires the main machine (Q13UDVCPU) to communicate via the built in Ethernet port with 3 different up and downstream machines using FX3G controllers with FX3U-ENET modules.    We are using GX Works 2 software. So far I'm having no luck with the Mitsubishi documentation, or online.  Some (old) sources say it is not possible, I hope that is not the case. What I could really use is a working example program to look at and dissect.  But any help would be appreciated.
  8. Hello everyone! I have problem with understanding the usage/principle of operation of parameter "Mark detection number".  In manual i read: "The number of mark detections is stored. "0" clear is executed at power supply ON. Continuous detection mode: 0 to 65535 (Ring counter) Specified number of detection mode: 0 to 32 Ring buffer mode: 0 to (number of buffers - 1) Refresh cycle: At mark detection" My question is which mark detections are stored? Servo detects some kind of marks? I am novice in servo programming, please explain in the easiest way. Thanks for help.
  9. Hi All, I have a system contains 1 PLC mitsubishi Q series , 1 HMI Got2000. Now, I want get data from sql server and use it for my system. My plan: I use 1 PC connect sql server and transfer data from PC to HMI or PLC. As I know, Mitsubishi have tool MX component, can set value directly PLC. But I'm not sure. Can you have any idea, help me resolve my problem.?
  10. HMI RESET TO FACTORY SETTINGS

    Hello, am using a gs series Mitsubishi hmi..unfortunately while downloading screen,power supply interrupted. plz help me to reset hmi to factory settings..presently a black screen is appearing and no communication is possible.
  11. I simply want to create a function that measures how long the machine has been running/functioning. I see the option to create the OUT T function, but that allows me at max to count up to 9999. Do I have to create some registers to continuously store this data?  Can I not just have it count up freely?  I have a couple other functions I need to run off of this further on, but this is the foremost issue. Any ideas? Thanks so much in advance.
  12. Hi, First as i know we can communication in MODBUS RTU as summary below 1.FX series, FX3U-485ADP-MB + ADPRW instruction  2.Q series, QJ71C24 <Serial interface module>+ Pre-defined protocol  3.Q series, QJ71MB91<Modbus interface module Three thing upper, i think it will ok   The question is  1> FX series, Cloud we use < Serial communication only not Modbus adapter> + RS instruction to do Modbus and How to do that.                              2>Can I write modbus rtu over RS-232 interface of the CPU module Q01UCPU and how
  13. Hi I have some problem about QJ71C24N with Modbus RTU Predefined Protocol. I have setting predefined protocol for QJ71C24N and use 485 wiring to modbus slave but when I start communication it returns CRC error then I use Circuit trace to check communication that result as in attachment that there are some echo back from send command mix with response command from slave device I think with these response cause crc error because there are some echo back in response data I have setting echo back to prohibit but result are same. How can I solve this problem?  
  14. Kinco HMI With Mitsubishi FX1S PLC

    I am trying to connect a Kinco HMI (T070) with the PLC of Mitsubishi (fx1s) but I want to know how can I add PLC tags to HMI Buttons (when I will touch on button on HMI, PLC switch X0 should be energized)? http://tiaportal.weebly.com
  15. FR A740 parameter save

    Hi Guys! A have a question about FR A740 inverter. Is there a solution to save the parameters from the inverter ? I know the method how can I copy the parameters from one inverters the to others. But what if I just have one inverter and I have to set the parameters. Is there a software for that task ? I f I remember correctly, there is an ethernet port behind the keypad, maybe I can use that ? ??? I want to save a backup too about the parameters and I dont want to see all of the 1000 parameters....  Thank you... Please help me.
  16. Hello I am  a Robot Programmer. Fortunately  I would be beginning the PLC Programmer Interview Process. From Initial CV Screening and first round of Interview. Screening was easier. But unfortunately I am not good with PLC tech questions apart from that is involved with Robot Programming. I need a few questions to judge whether the applicant is faking his experience or does he has the qualities. If any PLC Programmers can help me, It would be a great help for me.   Thank You
  17. I've set up a range of comments as well as their Chinese Translations in separate columns in GT Designer3. How do I go about putting a selector on the HMI to switch the languages from the HMI? I've been having trouble finding out a clear way to do this. The manual didn't seem to help.  When previewing the HMI, I can manually select the 2 separate languages and everything goes according to plan.Has anyone had any experience with this that could help out a bit?
  18. Mitsubishi GX Works Bugs??

    Hello I have been using GX Works 3 for a while now and I have discovered a couple of things, maybe bugs. I have not had any training for the software or hardware so maybe I did something wrong. 1 Labels. If you sort a global label table into any order other than the unsorted order that appears by default you are unable to create, delete or edit any labels. Our Mitsubishi representative discovered that if you click on the column header between 'Data Type' and 'Class' the order does not change but now editing is available. This, it turns out is a really bad idea. It seems the position the label was in when it was created is preserved, I think this is the unsorted order you get by default. If you sort the list and then delete a label it is possible that the label that should be in that position is also deleted. I have attached a small project to demonstrate this. Open the Global Labels notice the order they were created. Now change the sort order, click on the column header I described earlier to make them editable and then delete the label in position 1. For a while I thought this was the only problem but recently there has been a number of instances where I have created a label, given it a carefully selected address only to discover that it is being overwritten by another variable. I have not been able to work out exactly what is going on but I believe it is connected to the sort order of the labels. Also if you sort the order and change an address, have you changed the address of another label? The only solution I have found is to keep label tables very short so they are managable without having to sort the order, that is probably good practice anyway 1 Axis software limits. I have been using a number of axes in pairs, in incremental mode as caterpillar feeders, using FX5U-40SSC simple motion modules. I had a problem that the axis synchronised to follow would suddenly stop moving, the customer was having to power down the machine and start again. This problem persisted for months with Mitsubishi scratching their heads unable to fathom it out and ultimately stating that the problem must be in my code somewhere. It was suggested by the customer that it may be getting to a software limit, I showed the customer that the software limit was disabled in the setup and it was confirmed by Mitsubishi that it was not the problem. guess what, it is a problem. Once the actual position reached the limit of the double word memory it would stop moving. The solution is the take the servos out of synchronisation in order to set the position (datum) to zero every cycle. Unfortunately the drives do not always re-synch on the first attempt so you have to keep trying till it does, this now causes slight variations in cycle times but it works. Andy EDIT: I have since been informed that to disable the software limits they must be set to zero. This implies that the Enable/Disable setting is invalid and the limits are defaulted to their respective max values. Surely a default to zero would be more appropriate.     Label Test.gx3
  19. FX5U32MTDS error code

    Hi guys, I receive the error code, in Hexa, C035 randomly.  I've searched for an explanation about this code but found nothing. Does anyone have ever receive this code!?! FX5U32MTDS communication via MELSOFT protocol over Ethernet with MX-Component.
  20. Hi everyone, I just want to layout the structure of the question. I have a GOT2000 (GT27* series) that I have hooked up and communicating with an Allen-Bradley PLC. I have established connection and can pull out certain tags values from the PLC program in RSLogix 5000. While I can read the tag values, I cannot modify them (in certain conditions).  So let say that I have a User-Defined Structure named "Smoke_Detector" and here are it's available members: Smoke_Detector:   - ALARM (BOOL)   - ON_TIME (DINT) * DINT in Allen-Bradley but Signed Binary 32   - Battery_Life (REAL)  My question is that while I can read and display the tag and its members through the following:   - LAMP for Smoke_Detector.ALARM   - Numerical Display for both Smoke_Detector.ON_TIME and Smoke_Detector.Battery_Life But when I tried to modify the values via a Bit Switch or Numerical Input, it does not operate on them.  However, if these tags are members are just standalone tags, meaning that they are not within a UDT in RSLogix 5000, then I can operate/ modify them just fine.  Here are the things that I have tried: * Making sure that the permission are set to Read/ Write in RSLogix 5000 * Making sure that the tag definition in GT Designer 3 follows the structure where @[channel]:[Network #]:[Station #]::[Tag instance and member (e.g Smoke_detector is the instance and Alarm is member] Any possible insight and input are appreciate! 
  21. MITSUBISHI PLC TO VB SETDEVICE

    Hi, Have anybody knows how to SetDevice ? I only managed to make GetDevice working here on VB script here
  22. Gxworks installtion error

      Hai Freinds,  please help me to install the software. This is message  I am getting while installing GXworks2 sofware.  (could not read a file that is necessary for installation .Please Check If the installation source media is not damaged. When Downloading from MELFANS web .Please download again because .there is possibility of failing the download  )
  23. Dear Sir! I have a PLC Mitsubishi Q03UDE and a PLC micro850 of Rockwell. Can I get connect PLC Mitsu with micro850 via ethernet IP? If it can do, can you show me how to do it? Thank you in advance!
  24. Hi all !    I need a help about connection between mitsubishi GOT Simple series (gs2110) to kawasaki robot via crossed ethernet cable on tcp/ip protocol. I actually have a fx3g for main unit of my project, and also i have a kawasaki robot for slave unit. My purpose is basically to control both with HMI. I used RS422 between plc and got gs2112 and I want to use a crossed ethernet cable between robot and got but i did not communicate with ethernet even between pc and got. There is a manuel which I found on internet about GOT2000  Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) I think i need to work on  microcomputer connection (ethernet) subject, what do you think about that ? I need all advices and ideas which come from you.   [ROBOT]--------Ethernet--------[HMI]--------RS422--------[PLC] https://electrobit.ee/web/file_bank/Manuals/operaatorpaneelid/mitsubishi/GOT2000/GOT2000-connection-manual-ENG.pdf
  25. Hello, I am quite a newbie in PLC programming. I am trying to add a PID control function into a ladder program of FX3U PLC that was made by the person before me who used GX developer. I have read the manual, but still not sure if I understand it correctly or not. Please help me with questions below: 1. For parameters [S3]+1, how do I set the bit value? My understanding is that I need to align the bits I want, and then convert to Decimal number to set it, is this correct? i.e. If I need bit to be 0100001, do I set the parameter to 33? 2. How do I know if I am doing backward or forward operation? I think what I am doing is feedback control loop, does this mean it is a backward operation? 3. If I set auto tuning bit (parameter [S3]+1 bit#4) to 1, will this make the the program to run auto tune everytime I start the PID? 4. For parameter [S3]+22, [S3]+23 and [S3]+24, the manual said it will be occupied. Does this mean it will be preset by the program which I shouldn't mess with them? But how do I set the output upper and lower limit in [S3]+22 and [S3]+23? Also, I couldn't find any example of PID parameter setting in the manual. Not sure if I missed any important section in the manual. So please point out to me if there is any example. I also attached the manual on the PID page just for a quick reference. Thank you in advance for the help. FX3U Programming PID.pdf