Search the Community

Showing results for tags ' firmware revision 5.007 or later -1756-eweb controllogix ethernet/ip web server module'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 405 results

  1. Hi, Is it possible to get RS5000 or slc 500 software on an ipad to fault find and troubleshoot or even make edits.
  2. Direct Logic 05 Ethernet

    I have a control that I want to use a Direct logic 05 plc in.  It is a really simple program but it is going into a plant that has a main control panel that runs the plant.  I dont know the brand of the plc in the main control.  They want to be able to send me a command from their plc to the direct logic to turn on my unit.  I suppose that would mean a simple set instruction to my plc.  I also have a couple alarm conditions that I want to send them.  For example if water pressure is to low I would put my unit in the alarm mode and send them a low water signal.  If the chemical is low likewise,   I dont have a clue how to do this in my program.  Can anyone give me some examples in direct logic plc program for making this happen??? Thank you Thank you Thank you. MikeC
  3. Graphic Operational Controller

    Please give me the steps how to communicate GOC with Laptop using Ethernet and serial port I have using Codesys for Programming
  4. FX5U comm with A1SJ71QE71N3-T

    Hi, does anyone has program example of ethernet communication between FX5U (GX Works 3) and A1SJ71QE71N3-T (GX IEC Developer). I need to read and write in both directions. Thanks
  5. I was wondering if I can use the ethernet and the rs232 interface at the same time with two different devices. A computer with RSLinx on the ethernet and and Arduino RS232 on the RS232 with DF1?
  6. We have two computers and a plc that we use for training purposes to teach new techs the basics of going online with a plc and simple troubleshooting techniques. For some reason a couple classes ago we started getting an error from one of the pc's when we would try and download a program to our teaching plc. The exact same .ACD file can be downloaded to the plc with no issues from pc-1 but from pc-2 it gives the error attached below. I tried uninstalling all Rockwell related software from pc-2 and reinstalling but this didn't solve anything. Once I download using pc-1, pc-2 is able to go online with the plc and make edits no problem; it is just the downloading of the .ACD file it cannot seem to do. Processor: 1756-L55 ControlLogix5555 Firmware Version: 16.21 pc-1 OS: Windows 7 pc-2 OS: Windows 7 I'll be happy to include any extra details if needed but my team and I are just at a loss. Just short of formatting pc-2 we have no idea what could be causing this.
  7. Good Afternoon,   We have two PLC's and (L75), EN2T NICs.  One PLC is redundant.  L75 and L77 CPU's.  Over the last two weeks, we gradually lost HMI communications to ONE of the two PLC's.  Oddly, computer/RSLINX could see topics for ONE PLC but NOT the other.  Finally this was remedied by power cycling CPU. . . But then communications to second PLC, between RSLOGIX and CPU stopped working, while HMI comms was restored.  But now, gradually, we are seeing RSVIEW32 stop communicating -- that is, it stops 'seeing' topics on this second PLC, one workstation at a time.  EVEN THOUGH CPU SHOWS UP IN RSLINX.  When I run the OPC Test Utility, and click 'online', it shows no tags for that controller under 'online', whereas the other controller, shows the tags.  When I attempt to go online with the effected PLC in RSLOGIX, it just gives an hourglass.  Plant is running so my ability to troubleshoot is limited.  RSVIEW32 7.40 here under XP (I know it's very old). I even tried a separate installation of RSLOGIX on a laptop, same symptoms.  Even tried USB connection.  When I connect USB to network card, and browse to controller, it just gives endless spinning ball/Bill Gates stopwatch.  When I connect USB directly to controller, I also can't go online. Using mostly Stratix switches.  Also have a Prosoft Modbus card, and an eWeb card.  Problems seemingly came out of nowhere.  Any advice welcome!
  8. I have a fx5u plc connected to 2 keyence sr 1000 qr code scanners using plc link. On random times the plc error light will light up and all ethernet connection will be disconnected and i cannot connect to the plc with gx works 3. If i put the plc in stop mode tho i can connect to the plc. I do not know what error code is causing this because each time i connect the error code is missing. The problem starts when the plc is in run mode. Can anyone help me with this as this is a persistent bug that keeps on happening in my system?
  9. Hi I am using a P342020 together with a HMID642 Magelis Panel. Using Unity Pro I have successfully downloaded a program to the CPU via USB. The HMI Panel powers up into 'Initial Start Mode' and is asking me to 'Download the system from your editor.' How is this done? How should the ethernet connections be made? between PC (with Unity Pro and Vijeo), M340 and HMI panel and where do I set all the IP addresses? I guess there is documentation somewhere but couldn't find it...! Regards   Andy
  10. hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
  11. hallo everyone ...i use mitsubishi Q00UJCPU and QD77MS2.. i try to make a speed control program and the speed wants to be changed during servo operating, i use dedicated instructions ZP. PSTRT1 (axis 1) and have tryed but it was only successful to change speed with "change speed control" function once ... is it like it? cannot change "change speed control" many times when servo operations?
  12. Hello everyone!  I am having some issues with the internal wiring/wiring of the 1756-OF8 analog output card in my Controllogix L55 controller. I have just recently started using  Allen bradley products, so please bear with me. If my memory serves me correctly, in my past experiences with other plc vendors I thought I was required to provide 24vdc+ from the power supply, which is common to all the channels used for driving the analog out(4-20ma) to the field device being controlled. But I can find any documentation from Allen Bradley that supports this. Can anyone shed some light on how to connect the power supply to the OF-8 card.   Thank you!! Shane
  13. Good Day, I am seeing intermittent bUs (communication bus) errors on 3 VFD's simultaneously.  These are Yaskawa P1000's with CM092 Industrial Ethernet Cards. There are Stratix 5700 switches between the drives and the Controllogix 1756-L75 CPU.  Happens every day to every week -- intermittent. Reading parameter F6-98, it indicates a 'connection time out'.  I don't understand why I would receive this fault.  IGMP snooping and querier are enabled on all switches, if that matters. I do not have unicast checked but Yaskawa said that didn't matter.  Packet time is 100 milliseconds.  I welcome any input on what might cause this.  One Yaskawa tech said I should set speed to 100 Mbps (now set at 10 Mbps). Any help appreciated.
  14. Hi All  I'm struggling to a PLC using WAGO's e!cockpit software which I am new to.  In the network tab when I click to select "ETHERNET" from the "Scan Settings" area all that comes up is a drop down with "update selection" which does nothing.  As a result I cannot scan for the PLC's on my network. Has anyone got any ideas on this issue.  I'm running on windows 10, could that be a problem?     
  15. Hello, I have a fuel level reading system in a 2000 gallon diesel tank. the system has a slc 5 05 of rockwell. I need to connect the system to a printer located in an office 300 meters away from the tank. can someone give me lights about the type of printer I need and what communication technology to use, preferably wireless. Thanks.
  16. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  17. Hi All, I am new with PLCs. Currently I have a project that required me to send a 12 alphanumeric (2D code scanned) from multiple CP1Hs to NJ101. Then NJ101 will directly send the data into a SQL (haven't made yet). So basically, there are a few hurdle that I face. 1) How send data from CP1H to NJ101.  - I have tried using _CPU010_SendData from CP1H but I'm not sure how to do the ladder or what to use on sysmac (NJ101) side. Btw, I really not familiar with sysmac.  This is the first project that I use sysmac.  - I have read about TCP IP, Fins/UDP and Fins/TCP but I'm not familiar with those method. 2) How to confirm that NJ101 has received the data from CP1H 3) How to arrange the data received from CP1H into SQL - This one I have a sample program that I can follow from my colleague. 4) Setting up a dummy SQL server just for the sake of testing. - I don't have any idea on this. I anyone have an application or software that can used to test the database function, please let me know.   Your helps are greatly appreciated!   Thank you! Bob
  18. If you’re looking for a SCADA with extensive support for a wide range of PLCs and protocols, check out IntegraXor. It’s robust, feature-packed, and user friendly. The built-in web HMI lets you access your processes anywhere, anytime, on any device. Official Website
  19. All, I have been trying for days to find a way to control a yaskawa v1000 over Ethernet. I have been trying to use explicit messaging but I cannot find the instance class  etc in any of the yaskawa literature. All I can find is to use EDS files with RS5000 but I have a micrologix 1400 and I don't have that capability. If anyone has any recommendations let me know. Thank You, Liam M.     
  20. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  21. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  22. Hello I have a problem with dl-ep1 ethernet modul. I connected the module to a IL-1000 sensor amplifier. There is some problem with the communication. How should I adjust ? I made some pic about the trouble. The sensor is a IL-600 laser distance sensor. I dont know yet how can I get the actual value.  Anybody knows how to set this modul ? If I think correctly after the right setting, if I check the sensor output:0 then, I can see the actual value of the IL-600 sensor. But unfortunatelly this part also not so clear for me, because I can connect about 15 sensor this ethernet modul.  Thank you so much if anybody help.
  23. I have a cpu33 that I had issues with a bad battery and it loaded from memory card.  The version on the card was old so I decided to download the latest version from 2 days ago to it.  When I did, I lost communication through ethernet.   Can't connect through usb either.   The thing that baffles me is that I can ping the plc at the address and I get a reply.   Any help/suggestions would be greatly appreciated as I am not familiar with omron plc's at all.  Also on the display it cycles through Er HE 1P 07.
  24. Hi everyone,  I am trying to use Kepware to communicate with my PLC setup which is the iQ-R Series R08PCPU.  I read the documentation which is available at https://www.kepware.com/getattachment/3daf1ac3-5c76-49ce-bbfe-f0fb1015f6cc/mitsubishi-ethernet-manual.pdf I read through the setup for Kepware and the setup procedure for iQ-R series but it still didn't work.  From the documentation, it said something about "using special ladder logic to enable ethernet communications is required.", I couldn't find anything about this online.  Here what I did in addition to the documentation: - Enabled IP Packet Transfer - Ping the PLC's IP Address which was successful Does anyone have any idea what I didn't do to establish that communication between Kepware and R08PCPU?  Thank you in advance. 
  25. Hello,  I am migrating a PLC-5 to Control Logix.   Due to location etc, we need to keep the existing 845D-SHHZ25AGCW4 Encoders.  (256 counts, single turn 24vdc NPN open Collector.) I tried to use a 1756-Ib16IF, but I toasted my spare encoder.  (Have to get another one). My question is has anyone ever done this since the 1771-DL is not made in CLX form factor.   Also, what Module did you use if you did try this and if you have a wiring diagram,  would be great!  (I cannot afford another fried encoder) Thanks! Dan