Search the Community

Showing results for tags ' firmware revision 20.011 or later -1769-l16er'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 32 results

  1. RENU HMI

    Hi  I want to down grade my renu hmi FP5070T from 2.33 to 2.30. I have accidently firm ware updated to 2.33 .Now HMI is blinking and showing USB connected and disconnected.
  2. Hello Im using a 1769 HSC card with a L35E and trying to get the RPM. Ive been reading through forums for a couple days trying all the ideas from people who have had similar issues but I still cant get the current.rate(x) working.  Im using a single channel encoder at 60ppr. I believe the card is set up right and the channel is enabled. The counter seems to work fine but the rate stays 0 when im spinning the encoder slow but will jump to  100 or 200 if I spin it fast.  Any help would be appreciated. Thanks
  3. CompactLogix to 1769 I/O Cable?

    Looking for some help that i cant seem to find online - I have a  CompactLogix 5370 L1 Controller part number 1769-L16ER-BB1B and would like to connect a 1769-IF4 and a 1769-OF2 Analog expansion modules. Rockwell sales tell me they are compatible The Compactlogix looks to be a "slide in" and the expansion modules are Plug Type. Is there a cable or base rack I can use? Thanks in advance.
  4. Hello everyone! This is the first time I use Micro850 controller (2080-LC50-48QWB) and after I made a really simple programme (just for testing) I wanted to download it to my controller (which I was able to see and connect to via Ethernet and USB normally) and I got a message saying that firmware version didn't match (programme - v9, and PLC - v4). So I found some datasheet where was explained how to upgrade device firmware with ControlFLASH. I started the mentioned software, choose the right controller, and I choose the version 9 and the process started, but near the end I got the ERROR message, and the update wasn't finished successfully. So my controller went to fault (FAULT red light flashes) and now I can not see it in RSLinx nor via Ethernet nor USB. Does anyone have any idea what could I do to try to establish connection with my controller? I have tried to change from prog mode to run, and back to prog, but the fault remains. I really hope that I didn't make some serious mistake, because we need this PLC very soon for work. Thanks  in advance!
  5. Kinetix 3 firmware

    Hi, Can anyone advise on how to upgrade the firmware on Kinetix 3 drives (2071-AP8 Series A)? There is a firmware update option in Ultraware, but when I try that it says something like f/w version does not support upgrade. Is it actually possible to upgrade them at all? You can download new versions from the AB website, which suggests it must be possible. They currently have v2.00, and latest version is v2.23. I know these are old drives, but they still work so might as well get some use out of them. Thanks, James.
  6. R04CPU old firmware

    Hi all :) I'm looking for old iQ-R firmware (r04cpu), does anyone know where i can get hold of those? (Ver40 and before)    Thanks! YR  
  7. Hello everybody I have strange effects when connection MODBUS TCP IO-Boxses from my FX5U-80xx. So I thought about looking for network issues fixed in the firmware. So, the website below has firmware 1.201 and I have 1.110 currently. Does anybody know where to look for the revision history of these Firmware fixes? https://www.mitsubishielectric.com/fa/download/software/cnt/plc/index.html#js_swdata_cat_9 The Japanese have some more info here: https://www.mitsubishielectric.co.jp/fa/download/software/detailsearch.do?mode=software&kisyu=/plcf&shiryoid=0000000051&lang=1&select=0&softid=1&infostatus=8_1_1&viewradio=1&viewstatus=&viewpos= Translate:  "New functions added in firmware version 1.201 (2019/11) For details on the additional functions, refer to "Addition and modification of functions" in the related manual "MELSEC iQ-F FX5 User's Manual (Application)". The CPU unit serial number can be used from "17X ****" or later." I was not able to download these manuals (Japanese login screen). So I googled it and found it. But I was not able to find it in this document.  If someone knows more. Would be nice.  Thank you DWIM  
  8. Can I download an old program (written with RS Logix 500 version 5.2) into a newer SLC 5/04 Series C with a higher FRN than my copy of RS Logix supports? I don't want to use any newer functionality. Just wanting to get a spare 5/04 and load the application software on so it is ready to swap out in the event of a failure. I see some 5/04's on eBay that are new in box but have a FRN of 11 which wasn't out at the time my version of RSLogix was created.  
  9. Dear All, TM241CE40R is installed with firmware 4.0.3.18 If I buy new CPU with some other firmware, will it work or I will need to change the firmware?  
  10. Hi all,  I am trying to update the firmware of a NS12-TS01B-V2. I have downloaded the RecoverUpdate_8_95.exe (and someothers) from the myomron website. I have followed the instrucctions PDF, but when I switch on the HMI with the Compact Flash inserted, nothing happens: the screen is dark and the led is lit orange (not blinking).  The compact flash is 1GB (not omron) and formated using a CJ2. I have been using this card in OMRON PLCs and HMIs for years without problems.  I read in other topic than I guy had similar problems and he solved it using other computer and other unzipper program. I have tried it, but it did not work.  After that, I tried to update it using the DIP switches, but I got more problems, because I got a Warning first, and later an Error, because I forced the installation of the Firmware of the NS8 (BANK1) instead of the NS12. However, the other BANK folder contains the FW for the NS5... Anyway, I could fix this error because previously I did a backup of the already installed system (V7.0). I would like to ask you to send me a BackUp of another NS12, using the "Manual Transfer", that should works. I need the 8.20 version or higher.  Thanks a lot.  My email is hector.moreno.lax@gmail.com
  11. Dear All, 2094-BM01-SA0192 was installed on a machine, now we are installing 2094-BM01-SB1111 Problem is that when we Power ON, it start showing 0,1,2 and remains on 2 while in old SA0192, it goes to 1,2,3 and 4 then comes to normal display. can anyone suggest the solution? waiting
  12. Hi there, is somebody experience whereby the output of the 1769-OF4Ci is not responding on the value entered?.  Setting: 4-20mA Res: 0- 32767 - PID set whatever value I key in the output current remained.  please help. Ganie
  13. Hello forum! I'm using AB Compactlogix 1769 L35E CPU energized by 1769-PA2 power supply which is also supplying to 1769-SDN DeviceNet scanner, both via backplane. Trying to build a simply DN network connecting the scanner to a Balluff BNI DNT-104-000-Z004, which is a 16 PNP digital input block, since is only input module I rely that no extra power supply will be required. The problem is that when connecting both scanner and input block via my DN thick cable (Balluff BCC07YY), the input module does not energize. In fact I got no voltage reading when measuring voltage between scanner V+ and V- terminals. I measured voltage at 1769-PA2 power supply DC output (which is not in use) and its providing 24VDC, also scanner is powered on so I do not think the problem could be power supply nor backplane. Scanner display shows 92 number, scanner manual says that 92 error is "no devicenet power" and has the following description: No network power detected on DeviceNet port. Provide network power. Make sure the module drop cable is providing the proper power to the DeviceNet port. Which I do not get, is not the power supply from 1769-PA2 via backplane enough?  Is not the scanner supposed to provide voltage to the network? I've no grounding connection connected to PE yet (just between devices GND terminals)... is that a problem for testing this small network? It will be done soon but now I'm waiting for cable material. Actually I'm online using Studio5000 and have 1769-SDN DeviceNet scanner device declared at the project, there is no warning nor major fault displayed from the software. Thanks for reading.
  14. I need to run 4 exactly same devices with 4 different controllers. The logic for them would be exactly the same but the IPs and controller names would be different. Is there a way to do it using 1 project file? Basically whenever download is done the logic would be downloaded but the controller name/IP would be left unchanged. They will be connected to the same network so the IPs must be different. I am using 1769-L32E for these and all racks are set up exactly the same. Any ideas?
  15. Hello everyone! I am new to Eplan, and I am working on a big project on which someone else has worked on before me and almost finished it, but with a lot of technical mistakes and missing peaces. My boss expects me to fix a lot of things, but I have no experience with this software, so I could use some help. The problem is that no revision information (revision date, description, approved by etc) is displayed in this project, and I don't know how to make it appear, and be correct. I have made changes in plot frame and added special texts which should display these data, but I don't know where should I define wanted information (for example, I put special text for "approved by" but I can't seem to find adequate place to write the name of that person)? And, is there a way for Eplan to generate automatically revision description, based on the changes I made? From all said, it is obvious that I have no idea at all how revisions work, so any help would be enormously appreciated Thank you in advance! Cheers
  16. CompactLogix Hart

    Has anyone used a 'Spectrum 1769sc-IF4IH' hart card?  I am currently using studio 5000 vr 24.
  17. Is it possible to upgrade the firmware in an NJ controller?
  18. Hello everyone, we have two damaged analog cards for CompactLogix PLC ( 1769-OF8C  & 1769-IF8) that we are going to replace. my experience is with Siemens and Schneider PLC's  but for Allen Bradley, not so much so my question is : are there any requirements or specification other than the part-number that could prevent the cards from going in service directly ? as for the firmware, series and so on ?  and do i need to do any extra work after replacing the card ? thank you Best Regards
  19. Compact Logic 1769

    I have just started programming PLC's and the first thing I have came up against is a 4-20ma signal to a analog card for a Turbidity meter. The problem I am having is the reading is very erratic. Is there any way to get it from jumping around so much?
  20. Compact Logic 1769

    I have just started programming PLC's and the first thing I have came up against is a 4-20ma signal to a analog card for a Turbidity meter. The problem I am having is the reading is very erratic. Is there any way to get it from jumping around so much?
  21. F940GOT firmware

    Hi everybody, My client got a problem with F940GOT HMI, probably due to its lithium battery has dicharged. We have managed to find it and to replaced the battery, then have downloaded the working copy of the HMI program, which was uploaded from GOT to PC in good time, when the equipment was working fine. However after that not all is working well, something went wrong: there are unexpectable symbols on the HMI screen, undefined in the project... Perhaps, the HMI got a problem with its firmware... Therefore the questions are: 1) Where is to find the firmware? (may be somebody has it)  2) How to download the firmware into HMI? Thanks in advance for a quick answer and help, because the issue is quite urgent !
  22. S7-1200 firmware load on the CPU once we have it inside the card. What is the process and sequence of LEDs indicating which CPU is running at all times. Have a look and red amore at... http://www.tecnoplc.com/cargar-firmware-s7-1200-en-una-cpu-6es7-214-1be30-0xb0/ You can find some more inforamtion about how to update firmware at... http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ ------------------------------------------------------------------------------ www.tecnoplc.com
  23. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  24. Hi: I know how to update the S7-1200 by this link: http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ , but anyone knows about update the Firmware with other type of Memory Cards??? Is it available with 12MB or 4MB card??? Thank you a lot.
  25. First post. We recently upgraded our machine from an SLC to compactlogix. In the SLC 5/05 we used analog 1746-ni8 cards for pressure and position sensors. When we moved over to the compactlogix 1769 l36erm with 1769-if16c cards we seen issues where the analog values had very little definition accuracy. This can be resolved by changing the filters but then the response time of the card is to slow and we miss data. All of the relevant code from these sensors are in their own task and ive tried periodic, event and continous tasks but none of this helps. The strange thing is with the SLC we never seen these issues. Any ideas how i can improve the reponse time when the filters are set low?