Search the Community

Showing results for tags ' are: -1756-en2xx controllogix® ethernet/ip communication modules'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 470 results

  1. Hi. My goal is to communicate from a Wago 750-881 Controller to CJ2M With ETN21 on Modbus UDP. I can only find Modbus TCP function Blocks but would prefer UDP. Does it excist ? Cheers. WagoGrim
  2. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.

  3. connecting ixt4a to a cj1m/cp1l/ns network

    geomariolis posted a topic in Omron

    hi everybody i have a network with 2 pieces cj1m and 2 pieces cp1l communicating with a ns15 monitor. everything is fine. i need to connect an ixt4a monitor in that network. my question is : do i have to make new routing tables or it is not neccessary? my routing table for cj1m and cp1l cpus are attached. if then i have to make new routing table so that the cj1m will be able to communicate ixt4a monitor, how am i going to do it for both monitors? Any help will be mostly valuable and appreciated. thanks
  4. https://plus.google.com/u/0/collection/oCtiX To be continued...
  5. Hello everyone, I will be working on an automation project with an AB PLC, but so far I have only worked with Siemens. The system requirements are the following: Modular PLC that supports Ethernet communication (To use a PanelView), 10 DI, 10 DO, 10 AI and 10 AO at least and capabilities for ON/OFF and PID control instructions. I have been checking the selection guides for the SLC 500 System and the CommpactLogix System, but only found the PID instructions capabilities in the SLC 500. Probably the 1756 Controllers are too big for the I/O number necessity. I would like to get some advice about this selection, I am almost sure that the SLC will do the job, but if some other one that's smaller and more economical can have the aforementioned capabilities it'll be a better choice. Thanks in advance

  6. CJ1M communication protocol

    WKla posted a topic in Omron

    Hello, I am not familiar with the Omron PLC's. A PC is connected to the peripheral port of an CJ1M CPU12 PLC. The write command the PC is transmitting to the PLC looks like this (ASCII): "@00WD0070010055*." Can you tell me what kind of communication protocol it is using? It is a public or proprietary protocol? Thank you!

  7. Omron<-->Bosh Rexroth Ethernet/IP

    FrankA posted a topic in CX-One

    Hi, I'm trying to set up communication between a cj2m plc and an indra drive servo driver from bosch rexroth over ethernet/ip. Tried following a youtube video from rexroth explaining how simple this drive is to set-up with a 3rd party plc.... I have no experience with ethernet/ip, but what the video describes, i can't seem to do with omrons network configurator. more specific info on my equipment. Indra drive: HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-NN-FW Firmware: FWA-INDRV*-MPB-17VRS-D5-1-NNN-NN PLC: CJ2M-Cpu31. rexroth info says there is no eds file for this firmware, i have to use a generic ethernet module, and set up from there. I've tried everything i can think of and implemented all googled info i've got to no effect, can't get communication. Any help getting this drive running is very appreciated. Thanks, Frank
  8. *** SOLVED*** When opening a source or trying to connect to a 1756-L61 I get the following error: failed to open file..... Support for the 1756-L61 controller is not installed. All EDT files for it seem to be installed and I have no idea what else I need. Does anyone here know?
  9. Several years ago before I arrived at my company, an integrator came in to do the automation on our system. They used a Controllogix 1756-L61S for the safety portion of the project. Apparently, when they completed the job they did not provide the source code with comments, safety password, etc. for anything and it got ugly between our company and theirs. In other words, they would not provide it if we went back to ask them. Allen Bradley has told us that we can not make any alterations now to the safety logic because we do not have the password that was used to create it. And they said there is no longer a master password that you could use like in previous controllers. Does anybody know of any workarounds for this? Or have heard of anything that might possibly work?
  10. I have camera Keyence connected via ethernet to the S7-1200. In the cameras can be set about 30 "tools". Each "tool" perform a different function in the image. In what way in the program code on S7-1200 I can read eg Tool number 10? For example, if tool 10 is the correct I want to to value 1 on some tag for eg camera_tool1. Thank you in advance for any help. Regards Mikołaj
  11. Q. Is anyone aware of a manufacturer of ethernet power adapters that work on 575V (600V)? There are plenty of adapters for 100-240V, Linksys PLSK400 Powerline AV 4-Port Network Adapter Kit but I need them for 575V. Any help greatly appreciated. Many thanks!
  12. Hello, I am trying to communicate with MicroLogix 1100 from CompactLogix. But I keep getting an error and It says connection failure. This is what I have done so far. Can anyone tell me what I am missing? Regards,
  13. Automation professionals, I would like to read the display values of a red lion DP700 in a control logix PLC. I was able to successfully integrate both devices through EtherNet / IP and I am geting the corresponding values in a DINT register in the PLC. But the problem is that the value in the PLC register is not in the same format as in the DP700 display. The display reads the length of a product in inches like 288.484 etc. Where as the value in the register is a 10 digit number like 1133526516. For sure, there is a definite correlation between these two values but I am not able to figure out the exact relationship as a function of a formula. I have given below 25 data pairs for your analysis. I tried to find out the scaling factor (slope and offset). The scaling that I found fit the first 10 records but did not fit the remaining 15 records Can you help me to find out the relationship between the ? # DP700 PLC register 1 288484 1133526516 2 288627 1133531202 3 288631 1133531333 4 288739 1133534872 5 288741 1133534937 6 288742 1133534970 7 288746 1133535101 8 288757 1133535461 9 288776 1133536084 10 288796 1133536739 11 241060 1131482972 12 241043 1131481858 13 241027 1131480809 14 241032 1131481137 15 241055 1131482644 16 241038 1131481530 17 241078 1131484152 18 241025 1131480678 19 241030 1131481006 20 241037 1131481465 21 241040 1131481661 22 241023 1131480547 23 241053 1131482513 24 241041 1131481727 25 241077 1131484086
  14. Hi All, I newbie in allen bradley usage. I am trying to configure 1756-SYNCH profile in RSLOGIX V21. According to help of "Associated Axes" tab, Axis 0 can support AXIS_SERVO, AXIS_SERVO_DRIVE, AXIS_CONSUMED, or AXIS_VIRTUAL. To cross verify, I have added AXIS_CONSUMED in my project but AXIS_CONSUMED tag is not showing in axis 0 choice selection. Can you guys please help me why AXIS_CONSUMED is not showing in choice selection of axis 0 and axis 1.
  15. Hello everyone, I need to modify furnace ladder diagram to take control of the upper PID limit. The temperature on the furnace is controlled using PID. There is master PLC CJ1GCPU45SP which communicates several slaves CJ1MCPU13. It looks that all the PID parameters are send from the master to slaves over DeviceNet using seven DRM21 modules installed on extension rack. I can see where the values for the PID are entered on the HMI and moved to new location in the master but I don't understand why they are not placed in memory locations used by DeviceNet by default as per DRM-21 manual ( which if I understand correctly are D30000 to D31599). Is it because the DRM21 are mounted on extension rack? I will list all the upper limit locations in master, it is a long list but hopefully will help in resolving this issue: HMI entry location Moved to location in the ladder D16401 __________________ D32023 D16403 __________________ D32047 D16405 __________________ D32071 D16407 __________________ D32095 D16409 __________________ D32323 D16411 __________________ D32347 D16413 __________________ D32371 D16415 __________________ D32395 D16417 __________________ D32623 D16419 __________________ D32647 D16421 __________________ D32671 D16423 __________________ D32695 D16425 __________________ D29923 D16427 __________________ D29947 D16428 __________________ D31723 D16429 __________________ D31756 D16430 __________________ D31757 D16431 __________________ D31758 After they are moved to the D3xxxx location they are not used anymore anywhere in the master PLC so I am assuming they are transmitted over to be used in slaves. Is my reasoning correct? How can I calculate address space used by each DRM-21 card to make sure I am understanding what is transferred where? Thank you.
  16. Hi ALL, Can Schneider Electric CitecSCADA 6.10 talk to AB Micrologix 1100 via a Ethernet Interface Communication Module [1761-NET-ENI ]? And what Citec Driver can I use to set this up? Thanks Chris

  17. Built-in Ethernet vs QJ71E71 Module

    valsidalv posted a topic in Mitsubishi

    This is my company's first time using a Mitsubishi PLC and our partners/clients advised us against using the built-in Ethernet port on the Q03UDE CPU, saying that we should instead use a standalone QJ71E71 Ethernet module. The QJ71E71 costs 1.5x the CPU module so there are significant savings in using the built-in Ethernet. They cited reliability issues but can anyone here back up their claim? We use our PLCs as simple I/O blocks - a PC runs a program which communicates with the PLC and tells it what outputs to fire. There is no actual ladder logic on the PLC. The PC connects directly to the PLC. I wrote a small C# utility that blasts the QX40 and QY80 input/output cards on my stack with random values and reads them back to ensure correct data transfer. The QJ71E71 Ethernet module averages 10 ms for a read or write operation and the Q03UDE averages 3 or 4 ms (much quicker!). So, does anyone have a reason to use the QJ71E71 port instead of the CPU? Thanks
  18. Hello, At the plant I work at there are devices with IP addresses starting with 192.168.0, 192,168.1, and 193.168.2 The SLC in question is on 192.168.2 We would like to access it from our laptops which are on 192.168.0 The laptops have their subnet mask set to 255.255.252.0 and we are able to pull see other controllers on the 192.168.2 network. However, for some reason we can't with this one, not even when I'm plugged directly into the Ethernet port on the controller unless we change our IP address to one on 192.168.2 I believe the subnet mask on the controller isn't set right. Can anyone tell what I'm missing here? Here's an overview of the current settings: Laptop: 192.168.0.20, 255.255.252.0 Controller: 192.168.2.17, 255.255.252.0 Any help would be greatly appreciated. Ben
  19. Hello, I have an annoying problem with communication between Siemens S7 PLC and HMI panel. Here it how it looks like: I am using Siemens S7-315 with 343 Lean ethernet port. This port is used to communication with HMI terminal. Communication is realized through S7-TCP communication protocol. When I was testing the communication in the office everything worked fine and nothing wrong happened. The problem occururs only on the installation. After turning the PLC and HMI on everyting works fine, data is transferred correctly and variables are displyed on HMI. After a few hours the communication is suddenly lost. This is a direct connection between PLC and HMI and there are no other devices in this network. So it is not possible that suddenly there is an address confilct. I made a wireshark analysis (I connected a notebook and hub into the network) and I found out that when the communication is lost HMI terminal is trying to get data from the PLC but it is not responding. It looks like PLC ethernet port is broken. You cannot ping PLC from notebook and HMI. On the other hand you can exchange pings between HMI and notebook. The communication is back again only if you'll restart the PLC. The strangest thing is that I did not have any problem with the communication when I was testing it in the office. The configuration and project of PLC and HMI is excactly the same. The only difference is that on the installation PLC is realizing also a communication throguh Profibus and MPI. I've tried to use different ethernet cables (crossed, non-crossed) but in all cases the situation is the same. Do you know waht can be the cause of such behavoiur? Maybe someone had a similar situaion? In the attachment I send a screenshot from Wireshark which shows the moment when the communication breaks.
  20. Hello. This is the first time I use Ethernet in PLCs. I want to connect a Compactlogix L24 with remote I/Os and Panelview. I have many questions . But can you help me select the type of cable for this application , 2 or 4 pairs? shielded or unshielded?
  21. Schneider doesn't have the Sercos 3 interface out for the Altivar 32, and I'm going to use the Ethernet/IP interface until they do (not my choice). I found documentation on the CIP basic and CIP advanced control, and honestly, I will probably use one of those two, but I'm curious about the "Native" control, which seems sparsely documented. SoMachine Motion doesn't label any of the input/output words and it looks like you're supposed to custom select parameters that will be read/written using the drive's web server. Just wondering if anyone has an app note, bonus if it's explicitly for PacDrive3. Related, I'm a little fuzzy on explicit messaging with Ethernet/IP, but it seems that's what I'll need to do to setup the motor parameters and possibly to configure the "Native" control words. Any examples of that on PacDrive3 would be nice. I have a manual with the file name: ATV32_Modbus_TCP_EtherNet_IP_Manual_S1A28701_02.pdf that has been really helpful and may even answer all my questions, but it looses me in a few spots, such as how a parameter is addressed with explicit messaging.
  22. Good day I have a scenario where I need to connect to Ethernet ST-lite units to an L-series PLC. With a Q-series you will use the Modbus card and create a Intellgent Function Module to do this and specify the header addressing for the unit. With the L-series, you have Modbus on the build-in Ethernet port, but how do I now setup and specify the addressing for the for the ST-lite unit? Please help...
  23. I'm new arround here so first of all greetings to all and apologies for my English. I tell you the case: I have a machine that has an Allen Bradley PLC 1756-L1 (yes, it's already a bit old) communicating with another plc, a B&R 2003, through the serial port. I wanted to download the program from AB. I open RS-Linx, I create a DF-1 driver and then click on autoconfigure. At this point I get an error saying RS-Linx can't find the communication parameters. I tried to connect with two other cpus 1756-L1 that I have (these are new so they don't have program) and the RS-Linx locates them perfectly. I guess the ab cpu has its serial port configured as USER to communicate with the B&R plc (or something similar), so my question is if there is a way to connect to this cpu through the serial port (such as putting the serial port in default mode without deleting the program) or the only option left is to find an ethernet card to connect to the cpu. Thank you very much for any answer because I've searched a lot and I don't find any information about this.
  24. Hi I need a little help please with networking through ST Lite. The scenario. I have a Q03UDECPU (Ethernet CPU) PLC which need to connect to STL-ETH1 (ST-Lite unit) unit and then also to the LAN for the MAPS SCADA to be able to read it. Now the STL-ETH unit has 2 network ports that I can use. However, I need to know if a daisy chain type of configuration will work. Basically LAN --> Port 1 on ST-lite and from Port 2 -- PLC and then back the same route. Is this possible? Reason for this is because I only have 1 network connection available from the LAN.

  25. Control G120C via Profibus

    Bryll posted a topic in Siemens

    I'm trying to control the speed of a G120C via profibus, but it will trip out when any changes are done to the speed value. The unit was commissioned by another guy, and he doesn't have a clue where to look. We can start and stop the unit, but it will stop at any attempt to change the speed. I was told to look for a parameter allowing it to be controlled remotely, but wich one is it ? As usual when it comes to Siemens, the manual sucks. I'm using a function block for controlling the drives (13), and the older 12 is responding correctly to any change. Anyone here that has a clue what parameter to change ?