Search the Community

Showing results for tags ' architecture design this driver can be conviniently used with visual studio in development of complete large scale complex hmi/scada systems. it can be used to perform advanced reporting mes'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 385 results

  1. Control Valve

    protosta posted a topic in General Topics - The Lounge

    Hi, Please I am new to PLCs & SCADA. I will appreciate if someone can explain what it means by The inlet valve will be actuated by the SCADA  system via two 24V DC digital outputs. Why is it using two 24V DC digital output. Is this because it is a solenoid two way valve?   Thanks
  2. I'm printing extracts of my code for change control records. The print quality is terrible as it seems to output low-resolution JPEGs to the PDF or XPS files rather than vectored graphics and TrueType (or other vectored) fonts. See the attached close-up showing the artifacts. Exporting in this fashion also makes the resultant PDF unsearchable. I can't find any configuration options for this. Is there a fix?
  3. So my company recently purchased a new Allen Bradley PLC Demo kit from Amatrol (CompactLogix L16ER) and I installed the Studio 5000 v24 onto our company computer and started going through the Amatrol Lesson Plans. But then I had a bit of a snag. The lessons required that I open the files from the From Upload option on the Studio 5000 start up screen. Only, it wasn't there! There is no From Upload option on the start up screen. Anyone have any ideas how or why it's not there, and most importantly, how to get it there? It's kind of important!   Thanks!
  4. I have version 1.17  .. and when I tried to import a file from a friend, I got this instead: Is there anything higher than V1.17? 
  5. Hie, I am from a power utility company with almost 100% SCADA-ready facilities. the next challenge is trying to convert all these overwhelming site information into ACTIONABLE infos. The idea is to establish a dedicated centre (NOT a control centre) as a Monitoring Master Station and also as the Real-Time Asset Management and Predictive Maintenance tool. Question: Anyone can share experience/review on suitable Software and Hardware for such Master Station? If possible, inclusive of Front End module/ Historian/ Database Server/ Intelligent Software for input logics, etc.
  6. Hi.  I'm running a Windows 7, 64-bit machine.  I have NB Designer 1.4 installed.  when I plug in the nb7w-tw00b, it shows up as "MTP USB device", and that the driver install failed. so I opened Device manager and find the item, I right-click "MTP USB device", and "update drivers".  I click "Browse for my drivers" and navigate to "C:\programfiles (x86)\omron\nb-designer\driver".  I check "Include subfolders".  then click next.  it does not find the drivers.  says "MTP drivers are the best" So I try again: right click the "MTP USB device" but this time I click "browse for drivers", then "Let me pick from my device drivers...".  i navigate to C:\programfiles (x86)\omron\nb-designer\driver.  I select the bulksub.INF file, and i get this error: "The folder you specified doesn't contain a compatible software driver for your device.  If the folder contains a driver, make sure it is designed to work with WIndows for x64-based systems" NOTE: I just tried this on a Windows 7 32bit machine. same problem.  Except the message says "Make sure it is designed to work with Windows for x32-based systems"   Any thoughts to get this to work?
  7. Hello admin, Im new to PLC domain , i have one OMRON CP1E N30 with in built RS 232 port and ladder program to run in Homing and forward and reverse motion. I want to control the PLC from a computer using RS 232 communication. From what little i read from manual supplied for programming ,i came to know that there are two type of commands C mode as well as Fins commands. My doubt is whether these commands can read/write CIO memory addresses that are used to set and reset the motor enable/disable in ladder program through CX programmer software? for example: in my ladder program CIO memory address 30.00 is the motor enable/disable address so if i want to control externally from a PC to enable/disable the motor ,which commands should i use and is there a format to send these commands as well as the value. I am planning to build a GUI in Labview to cotrol the PLC via Serial RS 232 . How can i do it ? Thanks in advance.
  8. Good morning i want to know how i can recognize into the compactlogix 1769-L24 ER the micro 850 (2080-LC50-24QBB), because i want to communicate this two devices with MSG, i already i can see these two equipments into RSlinx but when i start Studio 5000 i don't know whick module i have to use it to recognize the micro 850, please help me
  9. I am new in sysmac studio programming. I used WSFT function (word shift) in cx-programmer. What function I will use in Sysmac studio? Thanks.

  10. Invert scale 0-990 --> 990-0

    Chickenkiller91 posted a topic in CX-Programmer

    Hello.  I have a D word number 0-990. I would like to convert it to 990-0. So i need a function which shows me 0, when the D100 is 990, and shows me 0 when the D100=990. And of course for the between values also. Calculating continiusly. Help is much appreciated :)
  11. Hi, I'm a long time lurker and would like to start by saying thanks for all the help over the years, much appreciated!  This is my first post, please be gentle. I'm working through a large project with an L83 (V28) including 75 EIP nodes & 5 servos.  We have a need for quick real-time response of 2 cameras during a quick servo move (taking several pictures).  I've broken my program up into a few event driven tasks (allowing me to chose the execution time interval (5 to 8 ms for more important tasks and 20 ms for less important tasks, etc.)), along with these I have 2 periodic tasks: 1 for my HMIs & faults running every 30ms and 1 for this quick real-time response camera situation running at .5ms which contains my camera and servo logic.  Everything is running well and seems responsive and repeatable enough, but I am now adding the second half of the logic which will essentially double everything (2 up system).  This has made me consider the best structure approach: Is it better to have a few larger routines within a few larger tasks or better to have more smaller tasks containing an abundance of smaller routines or some other different mix? Thanks, JD43    

  12. pc to plc

    Nyogianto posted a topic in Other PLCs

    I'm making a plc interface tasks using vb serial communications, I used omron plc CPM2A and Visual Basic 2013 to control and monitor the plc, but I do not understand how to transfer to plc vb command, and the response from the plc to vb. please help me, I'm sorry if my english language is not good
  13. Apply Now!BBG Management Corporation has an opportunity for a Factory Automation Services Manager in Columbus, GA.Responsibilities:- Leading engineering teams in maintaining a high-tech manufacturing facility- Working with clients and customers to outline and fulfill project requirementsRequirements:- At least 5 years of experience with service delivery (ideally in the manufacturing industry)- Excellent leadership (at least 5 years of management experience) and client-facing skills – sales skills are an asset- Experience with PLC/SCADA/HMI is ideal- Familiarity with IOT devices, sensors and transducers is an assetIf you feel that you would be a good fit for this position, please contact our recruiter Diana Iliev at diana.iliev@bbgmanagement.com.  Or, apply directly on our website at https://bbgmanagement.com/careers?t=5&b=Z5DQZZ6MC4P4LMHFTAUL4EEMAZLPA2U3Y3BRIBS6AA5RM6CJLZZLIJMVXRTBJHRXRUF5OC635ZESOLEDKEF7W%3D%3D%3DOur jobs are also available on LinkedIn, Indeed and Glassdoor.BBG Management welcomes and encourages applications from people with disabilities. Accommodations for disabilities in relation to the job selection process are available upon request.
  14. Apply now!BBG Management Corporation has an opportunity for a Manufacturing Engineer in Montreal, QC. There are two openings available, one junior position (recent graduates welcome) and one senior position.Requirements:- Experience with PLC, SCADA, manufacturing and robotic automation – several years for Senior, some exposure for Junior - Familiarity with C or C++ would be an asset - BilingualismIf you feel that you would be a good fit for this position, please contact Diana Iliev at diana.iliev@bbgmanagement.com.Our jobs are also available on LinkedIn and Indeed.BBG Management welcomes and encourages applications from people with disabilities. Accommodations for disabilities in relation to the job selection process are available upon request.
  15. BBG Management Corporation has three long-term contracts opportunities for Factory Automation Specialists in Columbus, GA.Requirements:At least 3 years of work experience as a technologist in a range of shop floor manufacturing applications (with a focus on manufacturing machine tools/robotics)At least 3 years of experience with machine tool PLC and SCADA software programmingAt least 3 years of experience with data collection and reportingStrong interpersonal and communication skillsFamiliarity with a dynamic shop floor environmentStrong mechanical skills/know-howFamiliarity of the Ignition software package is a huge assetIf you feel that you would be a good fit for this position, please contact our recruiter Andrea at andrea.nemer@bbgmanagement.com. Or, apply directly on our website at: https://bbgmanagement.com/careers?t=5&b=X2PUKIEMCALPSJOCDCH2O7FB2G7A7UZPVPEIYFMHDCFA2IF2I4FILAS6USM6ICE4BNXRBUMXELDSS5WX2VXVC%3D%3D%3DOur jobs are also available on LinkedIn and Indeed.BBG Management welcomes and encourages applications from people with disabilities. Accommodations for disabilities in relation to the job selection process are available upon request.
  16. Here's an article that compares the prices between FactoryTalk View and Ignition: http://blog.perfectabstractions.com/2017/03/13/ignition-versus-factorytalk-view-licensing-and-training-costs/

  17. Visu+ SCADA Query timeout exceeded on SQL Server 2014

    Bruna Pozzato Tavares posted a topic in Other PLCs

    I have an application in the Visu+ Scada System, from Phoenix Contact, which makes a query in the SQL Server 2014 database. While the database was empty, queries were made perfectly, after 4 months the database grew up absurdly and then stopped running the query, returning the following error: Query timeout exceeded. I have a general table with 210 variables being written every 20 seconds. The query is made by updating the parameters in another single row table, it generates a trigger that copies the requested query to a third table and it is plotted on a chart in the supervisory system. The error occurs when Visu+ sends the parameters to be updated in the second table, returning "Query timeout exceeded.". However, when I update directly through SQL Server, it updates, generates the trigger and performs the requested query. Could someone help me solve this timeout problem, please? Thank you very much in advance!!
  18. Inductive Automation is conducting a 5-day training course covering the core features of Ignition by Inductive Automation. It will be hosted at Flexware Innovation which is located near Indianapolis, Indiana. Most of the Ignition Core Classes in the US are offered in California, but for this time only we're offering it in Indy - midwest USA. Whether you are a new user to Ignition or an existing user looking to discover the full breadth of Ignition's capabilities, this is the course for you! You will get an in-depth look at the architecture of Ignition, involving the interactions between PLCs and SQL databases. You will learn how successful projects are planned and executed from start to finish. The course is 5 days long with class from 9 AM - 4 PM each day. The course is taught in a classroom where each attendee must supply his/her own computer. Complimentary lunch will be provided each day. The curriculum includes lecture, demonstration, and the creation of a live project that gives each student hands-on experience with all major features of Ignition. The format of the course encourages students to ask questions relevant to specific projects they have planned.   When: May 15-19, 2017 Class Hours: 9am - 4pm Where: Flexware Innovation - 9128 Technology Lane, Fishers, IN 46038 Cost: $2500 first attendee ($2000 additional attendees)   To learn more and register, please visit: http://www.flexwareinnovation.com/inductive-automations-ignition-core-training-fishers-indiana/ OR https://inductiveautomation.com/training/course/details/475

  19. KUKA: WorkVisual 4.0

    panic mode posted a file in Robots and Servos

    Version 4.0

    128 downloads

    KUKA: WorkVisual 4.0    
  20. KUKA: WorkVisual 4.0 View File KUKA: WorkVisual 4.0     Submitter panic mode Submitted 02/16/17 Category Robots and Servos

  21. Quick Panel (TCP model) Upload

    cajunconfigurator posted a topic in HMI & SCADA

    Hello All, I have an older Total Control Quick Panel QPI2D100L2P 10.4 inch Monochrome that I am trying to retrieve the program on. The original programmer is unknown and we do not have a copy of the program. The screen has gone out on this panel.I am using quickdesigner on an XP virtual machine. I have the correct programming cable the 8 pin DIN connector HMI-CAB-C49-JWhen I connect to the HMI, The software "sees" that the HMI is connected and says "waiting for the Display to be ready" then times out and tells me "the display is Hung" and another message "Turn display OFF" when I turn it off the software gives me the message "Turn Display ON" then when I turn it on, the software goes to "waiting for the Display device to be ready" and just sit there. Nothing more. I have waited for 20 mins for it to progress and nothing. At first I thought maybe the Panel that I am working on is just bad. However I get the same indications on another, same model, quick panel that IS working just fine. I know this is older stuff. And ProFace Support (who took over making the replacements from TCP) wont support using quick designer on anything other than a Win 2K machine or older. Anyone have experience with these panels?

  22. Dialog File Browsing

    gunnaraherman posted a topic in NJ Series / Sysmac Studio

    Hello, I am looking for a way to use the OpenFileDialog in VB to be able to select a recipe file to import. I read this forum: and thought that maybe I could access the OpenFileDialog function from the code, but System.Windows.Forms namespace is unavailable.  Is there any other way to access the dialog box to let the user select a file? I am using Sysmac Studio with an NA5 series HMI. Thank you for your help.
  23. Has anyone been able to produce screenshots of an NA project via File/Print menu option on Sysmac Studio? All this does for me is produce an image of a page showing objects or controls on the page itself, but it does not include anything from pages that are setup as 'background' for the page. This makes producing documentation a real pain. Am I missing something? Thanks for any help.
  24. Is there an built in function in iFix or VB script to export tags from an offline .grf graphics file? Thanks.
  25. My intention is create a visual basic program with access (or excel), if possible with a Cold link (so I wake up when I need data only). See if you can orientate me about the best way and solve my doubts. I am pretty new to all this. I have several Allan-bradley plc’s in the Ethernet network. Several PC’s with windows 8 and excel/acces in the latests versions I have a server in the net where I have installed RSLINX gateway version. I have created a topic and I can see the PLC variables in there OK. In rslinx  commnications -> I have set the click “enable rslinx classic gateway” I have run the OPC test client and it works OK according to some test Ihave found in google 8so OPC/DDE server is active etc) I want to retrieve Data in My PC from the rslinx that is in that server called BCNA08. I have colleagues that know how to run the EDIT ->copyDDE/OPC link and create a HOT LINK in excel in the same computer for other versions of rslinx (lite I believe) that they had for tests purposes. So I try the same but of course it does not work for a PC that is nor running RSlinx. My Rslinx is in BCNA08. How can I set a hot link (excel continuos update) and cold link (visual basic open/close communication). Any help or suggestions will be welcomed. Any good link to learn more too.