Search the Community

Showing results for tags ' architecture design this driver can be conviniently used with visual studio in development of complete large scale complex hmi%2Fscada systems. it can be used to perform advanced reporting mes'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 264 results

  1. How to watch the value in decimal directly in the ladder page ?  Default Hexadecimal The only way I can do it is in Watch Tab and I/O map per example Thank you
  2. i am new in indusoft web studio. i am facing a problem about communication of indusoft with plc.   i am communicating with plc through fx2n-422-bd card.   can some one guide me the steps of communication.  he/she will be a life saver.. as i am  in a deep trouble
  3. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  4. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!

  5. Compare data RS232

    riandanualdy posted a topic in CX-Programmer

    Halo, my name is Riandanu, I connect PLC Omron CP1E to weighing scale, and its done. i think i dont have problem between PLC and weighing scale. And i want to ask about, how to compare value from weighing scale ?  example : from the picture you can see value of weighing scale is " ST,+00160.66  g", and i want to compare it with 180 or 150 to give output on to lamp. Thankyou Riandanu       PLC to ek-i.cxp
  6. Hello all. I have been working with an SLC 5/04 system, which houses various Digital and Analog INs and OUTs, up to Slot 29. I am currently mainly working with Slot 25, an Analog Input: 1746-NI16I. This is a system which has already been set up and has been running for the best part of 8-10 years. This particular card has had some spare inputs, one of which I am trying to connect to. In the Advanced Configuration, only a few Channels are actually "Enabled", and each channel is pretty much slightly different from another in terms of Input Type, Filter Frequency and Data Format. I am trying to set up Input 14, which is Channel 15, to "Enable" it, 4-20mA Input Type, Filter Frequency of 6 Hz and Data Format of either Raw/Proportional or Engineering Units. Now, after I have made my choices, I click apply, and then OK. I am then confronted by a pop-up which states: "Configuration Rung and Data Integer Data File Number: 25 Integer Data Element: 100 Rung to be inserted: XIC S2:1/15 COP #N25:100 #O0:25.0 24 At Program File Number: 4 82" I have the options of OK or Cancel. If I click OK, I now have LAD 4, Rung 82 Highlighted. This First Scan Bit and COP function were already here, but does that mean I have now altered what is being written to "#O:25.0"? I now Download the Changes. However, after all this, I am not getting any Analog input reading coming in from the Live PLC. What is this COP function? What does it do? How do I properly set up this Analog Card?   Thanks for your time, -Jame

  7. Communication

    ivan da silva posted a topic in Allen Bradley / Rockwell Automation

    good evening. Someone can give tips on how to configure and physical the application with the following items: Advanced Interface Converters (AIC +), PanelView800 2711R-T7T A and MicroLogix 1500 Programmable Controllers My doubts are about the configuration of the communication, and I have doubts about the physical environment and protocol to be used.  

  8. Torque Control

    avfleali posted a topic in Omron

    Hi, For my system I use the functions Mc_MoveAbsolte and Mc_TorqueControl. my problem is when i use absolute function after torque control for zero point. the servo turns the torque point control. For example: Target 1: 200 mm target 2: 150 mm Target 3: 240 mm ( Start point of torque) Taget 4: 330  mm (end of process) Target 5: 0 mm After "end of process" the servo turns  to "start point of torque" Can you help me please    
  9. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
  10. Hi all, I uploaded SW from working PLC NJ301 1100 v 1.9. Uploading worked, but when I tried to open program, all rungs were empty (see picture). Does anyone know the cause?
  11. Hello guys, I have a system of 3 load cells (SP4M-7Kg) attached  to a Micrologix 1500 analog inputs. in the same PLC i have 3 coils for a vibrator, each vibrator is working with signal generators. and the load cells with an external 24vdc Power Supply. i see my load cells readings fluctuating too much even with the vibrator not working. if it is set lets say 70 Grams it is jumping from 68.4 to 74.8 going up an down never never stabilizes in one number, so i suspect am getting noise somewhere put a 100uF capacitor PLC inputs for the load cells but weight just increases more and more. How can realize where is the noise comming? what can i use as a filter? how can i improve this system? should i changed it to digital?   any help welcome! thanks.  questions?    

  12. Homing servo motors

    scotty134 posted a topic in NJ Series / Sysmac Studio

    Hello everybody, I have a question about homing servo motors. I have a project with new servos from Omron and I would like to know what is the best way to do homing for the servos and how often. Before when we have servos with encoders I was making special homing sequence and was calling by some event. I heard that new servos from Omron pretty smart and remember own position without batteries. So with this 'new generation' of servos what is the key to keep machine robust, easy for motor replacement without useless programming stuff. Regards, Scotty
  13. I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501.  If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.
  14. does anyone know about usb driver cx programmer for windows 10 64 bit? I can not upload / download programs without this usb driver. Please tell me if anyone has or there is a link for this, Thank You.
  15. Any new tags I add in studio 5000 the HMI project shortcut cannot locate the tags, it says unresolved route to processor. It's the same shortcut all of the other tags are using. Please help. 
  16. This is my first time to the forum and I am still very new to plc programming. I just had to move all of our software over to a new computer ( kind of new) it's running windows 7 pro. The same is as the computer before. Same computer name, same I'm, same file directory. However when I add tags in studio 5000 and reference them in the HMI, it says it is unresolved in route to the processor. It only does this for the new tags. I used the same shortcut and everything so I am at a complete loss here. What do I do.

  17. Struct as FB input

    Alex Teeuwen posted a topic in NJ Series / Sysmac Studio

    Hello,  I am trying to define a struct as an input variable for a Function or Function Block. For example the function AddDelimiter (This is a standard Sysmac function), has a input variable with the variable type Struct, an it is possible to couple a struct to this input (See picture below). If i try to make my own function block with a struct or Structure as an input data type, i get the following error (See picture below). When I try to define a struct from the data types (In this case struct: Test) it doesn't give a error. But when I try to couple a struct to this input, that is a layer deeper than the function block struct i get the following error (See picture below). How can i define a struct as an function/ function block input? Thanks in advance.
  18. OS: Windows 7 Ultimate 64-bit running on VMware virtual machine. Installed software: Studio 5000 V21.0 Licence: Concurrent (served by licence server on another PC). On starting Setup.exe from the VM's desktop I get the message     "Studio 5000 does not support this version of windows" Any ideas how to proceed?
  19. Hello,   I want to do a small scada for Allen bradley plc  on C#. I did a hmi/scada for Siemens S7-1500 plc on C#, it is working and free. I dont want to use Advanced  Hmi. it is looking free but I can not use it in industries as free. so I decided to use direct C#. Do anybody has sample program, code, document, library, link, etc.. about C# and Rockwell plc communication? second solution and question, if anybody has no solution; I may solve it with modbus TCP. but I dont know Compact logix L27ERM CPU support direct modbus tcp protocol. if anybody has knowledge about the modbus tcp protocol document, sample program etc.. I can try to communicate with modbus tcp C# and Allen Bradley.   Thank you in advance. 
  20. Is there any way to establish a variable as min/max value of a gauge on sysmac studio?
  21. I am using an Omron NJ controller and a Cognex Dataman 260 bar-code scanner.   At this point I can trigger the scanner and receive data from the scanner via ethernet/ip. My issue is in converting the response from the scanner to something human readable. The bar-code I scanned reads "872-3GSq".  The results of the scan are located in the variable Dataman_to_NJ[8]-[11]. At some point I know I need to use the SWAP function but I believe my lack of data type knowledge in this system is hindering me. How can I convert the value in Dataman_to_NJ[8] to the string "87"? Any assistance would be appreciated.  
  22. Hi, I've been working with RSLogix 500, today i found that i was unable to connect to Micrologix PLC because in the RSLinx the Driver Ethernet IP that was configured to communicate whit PLC appears with a Red Cross. Yesterday everything was working. I've installed an antivirus software, i supposed the reason was the antivirus, but i've tried on configs and even uninstalling it, and RSLinx seems that can't reconigze the ethernet adapter (guess that means red cross) RSLinx 3.51 CPR 9 SR 5.1 RSLogix 500 Pro 9.0 Windows 7 Ultimate 32 bits Could you, provide to me some guidelines to solve this, or if somebody has had this problem, could share the solution? thanks in advance

  23. HMI VIEWER APP

    jampc posted a topic in Omron

    Hi recently I have seen Omron Europe and I have download an app for Android and iOS, that app can allow you to remote view HMI types NB,NS and NA9last from Omron). The reason of all of this, is if some body have try this app and also if communication and remote view was creat it. I have try all my best but still can't make it, if some body did it, could you please share it?. Thanks, Jose
  24. Save on development time by having a copy of your target system on your bench.  Develop the target code in a local environment (coffee handy of course)  then deploy with high confidence.  Systems built to order.  
  25. Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture.  https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.