Search the Community

Showing results for tags '#siemens #logo! #soft comfort #free software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 215 results

  1. Hi all  I need help with communication between Mitsubishi L06CPU-P with Siemens S7-1500 by Modbus TCP. It's necessary to send data from L06CPU to S7-1500, but I don't know anything about mitsubishi and gx works2.  Picked up some pics how I did it, but I didn't verified how it works. Can anybody help me with this?   edited: I also found LQnUDEModbusTCP_GW2_with_FC_V120 library, but how it works I dont know
  2. Hi, I have an old TSX 47 30 that has an I / O fault (red led on) green led on run and plc stopped. I'm writing to see if you can help me to establish communication and achieve the download of the program. I do not have the communication cable or the PL7-3 software under OS 2. So far I have done searches on the schneider page, forums and all the links are lost or deactivated. I have read your answers in plc of the same series and I observe that a converter rs 232 to current loop is needed. In this case here in Venezuela it is difficult to get this converter, however I have observed the black box model 232 CL-E, CL050A and I think it can be useful. I also have an old toshiba laptop with windows xp with a native rs 232 port to avoid another converter and I could make the connection cable DB25-DB9 to the PLC. Now I would miss the procedure to make an OS / 2 bios and get the software or make a virtual machine in which case I require the appropriate software .. thanks for your help
  3. I am pretty new to the SCADA world. I wanted to know what are the advantages of using a paid proprietary SCADA software such as WinCC, Wonderware, cimplicity over free software such as OpenSCADA, OpenAPI, IndigoSCADA and so on. I have read, there are more layers of security in the paid one. What does that mean? What are the other main differences between the paid and free ones out there in the market?
  4. I have a purchased Machine that came with a Siemens LOGO 8.FSR PLC (Smart Relay). Generally we use Allen Bradley or Mitsubishi. Anyway, we need to communicate data between the LOGO and an Allen Bradley Compact Logix.  I do not desire to add an additional network to the AB but as best i can tell the LOGO is exclusively Modbus TCP/IP. Has anyone come across a similar situation?  I look online and did find an  Anybus module that claims to be able to link them together.  Looking for anyone who has faced this challenge and succeeded, or failed.   Thanks
  5. Good day all, I'm going to get a new Siemens PLC (model haven't decide) for a project using OPCUA server. I'm curious to know whether I made the right choice or not? Cause I planning to use that PLC to process some data that it got from OPCUA server. Can I know whether I can directly use Ethernet connection to take the data from server directly and fed it into my Siemens PLC? (I probably won't use the DI of the PLC for input data)
  6. Hi, Is it possible to have two hardware configurations which can be switched through HMI. currently i have two hardware configurations and the project remains same. So without connecting with Simatic Manager i want to switch the hardware configuration. 
  7. Check it out here!
  8. Siemens IEC 60870-5-103

    Hello!, im having some troubles communicating Siemens Relay 7SJ622, with the IEC 60870-5-103 protocol, with some SEL controller, i don't have any signal of the slave relay 
  9. Hi guys, since this is a forum for people starting out with TIA Portal, I would like to share with you my course that I developed for the last 6 months.  This course uses a real-life sample application and translates it into a fully functional TIA Portal PLC application.  This course of 2,5 hours consists mainly of video explanations with practical programming assignments to put your newly gained knowledge straight to work.  As a controls engineer, I have over 10 years of hands-on experience with TIA Portal ranging from software development, commissioning and troubleshooting. At the end of this course, you´ll be able to: Structure and program a real-life user application in TIA Portal Download and Troubleshoot a TIA PLC application Program function blocks (FB) using ladder logic Build global data structures using user-defined-data-types (UDT) and data blocks (DB) With the coupon link below, you can enrol for only $12.99 (might vary depending on the country you live in).  The course is normally $99.99, so you get an amazing all-round programming package for almost no money.  So go and check it out  Take me to the Course Now!      
  10. Did you always wanted to get started with Siemens TIA Portal programming, but you were never sure where to start or how to get the best performance out of the platform? Eager to upgrade your TIA skillset from an instructor with over 10 years of TIA experience in the field?   -> Then this course might be just for you! My course "Siemens TIA Portal - PLC Programming Basics" will take you through the steps of creating your very first TIA application - from structuring (very important!) and programming your application, to downloading and troubleshooting your application online.  The course is based on video lectures and is around 2.5 hours long, and consists of 40 lectures divided over 6 main chapters. The enrolment fee is offered at a huge discount at the moment, so take action while it lasts! Take me to the TIA Portal course, I´d like to check it out...   Thank you, and I hope to see you inside the course! Hans
  11. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.
  12. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  13. Omron CJ1M CPU11 - ProfiNet - Siemens

    Hello guys, newbie here. Wait, where are you all going...? Don't go! I've got *some* experience. And a job on my hands. I've got an Omron CJ1M with a CPU11. Attached, is a PNT21 Profinet IOController. At the other end, it is going to be a Siemens SIMATIC ET 200AL, PROFINET interface module IM 157-1 PN with a couple of digital input and output modules attached. The hardware isn't here yet, otherwise I'd just jump straight into trouble. Probably. I've got it mostly setup in ConfiguratorFDT with the GSD files from Siemens. The question: How do I map the Symbols to the digital IO at the other end of the profinet? Can I just set the symbol address to the IO areas that ConfiguratorFDT show me, ie, 3300 for the inputs, etc? Thanks!
  14. i am trying to communication my weintek HMI with Siemens Energy Meter PAC3200. I am using MODBUS TCP/IP Protocol but i am unable to read the data register of my energy meter. Somehow i got to read the 32bit data register but still unable to read the 64bit data register of my total KWHr Energy consumption. I have also attached the manual of my energy meter. Please guide how to read all the data registers of that energy meter. Please see the page 40 onwards for reference. The manual the about 7MB so i cannot attach the file.  
  15. Hi guys I am trying to connect a Mitsubishi FX5U PLC to a Siemens WinCC RT Advanced. I did find a document on the Siemens side on how to configure the HMI, but I can't seem to find any instructions on how to configure it on the Mitsubishi side. Any help, sample will be appreciated.   Kind Regards Morne
  16. Siemens Simatic S7-1200 component selection

    Hi,  I am designing measurement devices and i intend to use Simatic S7-1200 as PLC for my new device. The problem is, my background is nothing close the electric and I am having quite a lot troubles when it comes to select components, I do not know how can I select components that are compatible with the PLC i am going to use.  Pressure sensor, humidity sensor shall be selected and which parameters I should be careful about? I read somewhere 24VDC supply voltage is needed. Is it needed even the device has digital output or is it for analog output only? How do I make sure about the communication interface? For some devices it says I2C, is that compatible with S7-1200? or do i need a special communication module for each component? Then it will be super expensive.  I would appreciate any answer. 
  17. Connection cable for Sinumerik810

    Hi, I am trying to connect my M2 pg with a Sunumerik 810 cnc.    does anyone have the part number or pin out of the 25 pin-25pin tty cable that’s needed for this.    thanks   
  18. Hello, I need to make communication NB TW01B by Omron with Siemens's S7 1200 PLC using MODBUS TCP. I did everything like in this manual: I can read and write single bits from and to DB but I have problem with representation of float variable. In hmi_variable.png you can see my DB. Every BOOL variable communicate just fine the real ones doesnt. In NB - variables.png you can see how i added them into NB panel variable table. Settings.png shows settings of my INPUT number element on the frame( screen in NB). When I write on panel for example number 10.0 then from the panel view it looks properly but in PLC you can see value like in the 10.0.png. What am I doing wrong? Any suggest? hmi_variable.png NB - variables.png Settings.png 10.0.png
  19. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  20. Hi everyone! I have a question to all of you guys - do you ever use any software or online tools to manage your automation/electrical engineering projects? I have worked in a number of companies and have seen various scenarios, from using excel tables to run multi-million dollar projects to using proprietary SW for every little tiny project. Unfortunately I do not have experience working for any major big integrator and am very curious how projects are managed at this level (and if every engineer likes the way it is handled).  Additional question - does anyone have ever used a software to automatically generate the PLC code? I know some companies develop products to generate the "skeleton" of PLC program and I think it is a great thing to have.
  21. I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio).  I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT.  I have been told I should be able to do that, but it still does not work.  The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before?  It may be a setting I have not done right maybe?? Thanks,
  22. Hi all,  I am in the process of doing a project for some school work and need to do a SWOT analysis of the latest modular PLCs from Mitsubishi (R series), Siemens (S7-1500) and Allen Bradley (ControlLogix).  So I thought what better way than to ask the people on what they think are the pros and cons of each! Thanks for your responses in advance!

    Hello everyone. I am looking for a link to download Microwin 4.0 sp7 or higher and not the update. Kindly advise me. Thank you.
  24. Hi all. I would like to get in contact with whoever can help me in my particular problem. I hold an HNC level in robot and plc programming but for different reasons I'm still trying to get on the industry but is being a hard task. It's been a while that I'm trying to get into some companies by agencies and they are always asking for something that I can't provide like two years experience. Basically I'm writing here trying to find someone that can help me in anyway. Currently I live in Shrewsbury and it will be complicated to get relocated but nothing is impossible if things are interesting for both sides. Thanks to all even for read it and just consider the possibility to help me on any way.   
  25. Dose anyone have experience with Beckhoff FC3121 profibus master PCIe card connected to Siemens CP342-5 as a profibus slave? The data retrieved from S7 PLC is wrong, and keeps fluctuating rapidly. TwinCAT (TC) config looks OK, and it reports that the slave is OK and has no error. The slave is in Run mode with green LEDs. S7 side is believed to be OK as another master from HMS-Anybus retrieved the data correctly. Tried several versions of TC up to the latest (at the moment) ver. 2.11.2305. Here is a zip file with two graph pics of the two masters showing how the "same" data looks like in each case: Thanks, Hos