ASHISH CHABHADIYA

MrPLC Member
 View profile  See their activity

  • Content count

    4

  • Joined

  • Last visited

Posts posted by ASHISH CHABHADIYA

  2. Posted

    On 04/03/2020 at 7:37 PM, Michael Walsh said:

    95.01 is motor non-conformity.  It that is actually the fault that you have, it means that you are not using the correct motor and drive combination. 

    If the error is actually a 95.05, then you need to perform the motor setup and absolute encoder setup.This needs to be done with software.  

    On 04/03/2020 at 7:37 PM, Michael Walsh said:

    95.01 is motor non-conformity.  It that is actually the fault that you have, it means that you are not using the correct motor and drive combination. 

    If the error is actually a 95.05, then you need to perform the motor setup and absolute encoder setup.This needs to be done with software.  

    Yes, Michael you are right error is 95.05. I can reset it by connecting to PLC via sysmac studio then in ETHERCAT menu selecting motor and encoder setup menu on my drive and pressing "Reset motor replacement detected error" button. But I want to reset this error using some code or some instruction in my program so that I am not required to connect my laptop to PLC to reset this error, when I replace motor from machine...

    I have read in manual that I need to perform motor and absolute encoder set up. Please tell me how to do this using some instruction or some code...

    Please share necessary code to reset this error using program and without connecting my laptop everytime, I replace a motor...

    Thanks to all for your support till now, thanks in advance for future support...