-
Content count
20 -
Joined
-
Last visited
Posts posted by javiermorales
-
-
Hello colleagues, I leave you a link from Amazon, where I leave you Mitsubishi PLC clones at a low price, ideal for doing small tests at home level
FTVOGUE DC24V FX1N-14MR Placa de... https://www.amazon.es/dp/B07NPPX356?ref=ppx_pop_mob_ap_share
best regards
-
colleagues, here I leave you an offline configured for the Q system greetings
http://forums.mrplc.com/index.php?/files/file/1160-q-selection-tool/
1 person likes this -
-
hello I leave you the euro protocol more.
with digital inputs and outputs both security and control.
best regards
-
hello, you have to download the ethernet ip configuration tool software, once you have it installed there you can put the equipment
best regards
-
The only purpose is that the variables you declare can be used in both safety and control program.
Greetings -
Hello colleagues, I comment.
I have left an iq-r selection tool for the offline version.
It comes very useful when you don't have internet.http://forums.mrplc.com/index.php?/files/file/1157-iq-r-selection-tool/
-
IQ-R SELECTION TOOL
View File
IQ-R selection tool offline version
-
Submitter
-
Submitted02/10/20
-
Category
-
-
Hi, what model is it, and how are you communicating with it?
Greetings. -
hello to use the variables you have to do the safety table, I attached an image of the three tables, shared safety, no safety, and only safety
so I could see the table that is putting the safey entry, it is a non-safety table
-
1 hour ago, Thiago Turcato said:News: I've been running some simulations and even though you bind QJ71LP21 module to R04 in System Parameter, the module error persists indicating incompatibility. This way the solution is like said by Gambit: make two separate racks with one CPU each and connect them by using Simple Communication or any other network that is compatible with both CPUs, Safety RnSFCPU and Regular Ladder RnCPU.
BR,
Thiago
hello thanks for the clarification I will try to look at this part to be able to make it independent. Greetings and thank you
-
1 hour ago, Thiago Turcato said:Hello, if the melsecnet model is associated with the r04, but I think that as both the r04 and the r120 have to have the same hardware in their programs, and these in turn are housed in the same rack, I think that is where the problem, my intention is to see how I can do it to have it and to be able to communicate, since I am currently working without the expansion rack so that it does not incompatibility. thanks
-
-
Hi thanks.
The main CPU is security.
the other cpu is the one that I bridge between r04 is the one that I join with the expansion rack.
The question I ask is this?
would it be convenient to separate the r04 from the r120 in different racks?
and then could communicate as you say, I imagine it would be cable between racks. -
hello, the scada with which protocol works
because if it is connected to mitsubishi and goes by ethernet
pcs7 has an ethernet option -
Hello partners.
I wanted to comment that I have this configuration.
and he is giving me the following error in r120.
although the expansion frame is controlled by r04.
I wanted to know how I can fix it because I have to communicate the r04 with the expansion rack
and the r120 with the r04.
I don't know if it would be independent one rack the r04 and another rack the r120
and if that were how I could get to communicate them.
thanks
Replacement different brand PLC.
in Mitsubishi
Posted
At the hardware level, they are similar, the difference is in software that will have to be connected to contact to migrate it.