JeanPierre

Hello, Let's have a look to the join quick start. DDE link OK. CX_Server_DDE_Manager.pdf

Let's have a look to Cx-Protocol Help > Create/Upload Trace Data. Use the procedure to record trace data.

Let's have a look to this example.INDIRECT_BINARY_ADRESS.cxp

Use @DM/EM (Binary indirect addressing)

I've been trying FinsGateway Trial 2003. No problem http://www.plcsoft.ne.jp/soft/Eng/T_Trial2003_E.shtml Serial Communications and FINS Network The communication functions that FinsGateway provides are based on the FINS network model. This section explains how FinsGateway communicates with serial devices based on the FINS network model. Unit Number and FINS Network For Host Link (SYSMAC WAY, SYSMAC WAY-CV) and CompoWay/F, a unit number is assigned to distinguish each device connected to the serial cable. In FINS, communications are handled by network address, node address, and unit address. For the FinsGateway SysmacBoard Unit, the serial line is treated as a network, and that network is assigned a FINS network address. In other words, the computer COM port is considered one network. In FinsGateway, a device that can be distinguished by its own Host Link or CompoWay/F unit number is treated as a node in the FINS network. However, the Host Link or CompoWay/F unit number, and the FINS node address do not have to be the same. The Host Link or CompoWay/F unit number and the FINS node address can be set independently of each other. The Host Link or CompoWay/F unit number and the corresponding FINS node address are set in the SerialUnit Properties, COMx dialog, in the Node tab. Be Careful: The Host Link and CompoWay/F unit number 0, which cannot be used in FinsGateway is preset to be node address 240. In FinsGateway serial communications, the unit number of the FINS address has no meaning. However, to be consistent and compatible with other networks, it is recommended to set the unit number 0 for serial communications.

let's have a look to this attachment. Quid.pdf

hello, i would like to store the content of IR index into DM, to know the adress of the max value, in a DM array. let's have a look to my example, please. new french member. MAX_AVEC_GESTION_DES_INDEX_IR___DR.cxp