Ojay

Thanks for the reply....i critically checked the alarm files and see that no comment was entered for some error. Perhaps the bit is ON and the HMI just displays "No message". I will investigate further from the GX works.

existing project and i have checked the comments for the NO message but cannot find it. Please tell more about the extended settings

I would want that the pop up alarm is not showing when there is no alarm or error message. I am using GT 21 and the pop up alarm is there and displays NO message all the time. How can i disable it when there is no error or alram message?

is the settings for the file save configured properly? with softGOT2000,it is always advisable to open the project afresh when you restart

someone please help to answer this question

Thank you.....actually did not get the right direction....quite a newbie... Attching a screen or explainng more will help. I do not mind waiting.

I have several motor devices and would like to use just one window screen; to pop up when the switch near the motor device is clicked ...for on,off and stop. is it possible to use just one window screen for all these motor devices about 10 of them on the same base screen?how?

Absolutely right. Thanks for the clarification.

how can i do this?...please explain further

i preview and test  my design  on the preview window.    I have a numerical display tool  and a graphic bar.... I want that when the value on the numerical display changes the fill on the graphic meter should respond accordingly...... the graphic meter should read data from the numerical display......and fill accordingly... i still cannot figure it out    

I create a graphic meter and i want it to read data from the numerical display..how can i do this?

Thanks a lot  Steve.That worked......

Please i want to put a title for on the overlap window...I cannot figure how to do it. For example on this screen,how did they input the text "Load Information" on the overlap window screen? Mine is empty and just the close button on it.Thanks

Thanks....