Anthony0307
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Posts posted by Anthony0307
-
-
ETH-1 is active in RSlinx but the RSLogix5k shows Path AB DF1
-
-
-
-
I got it!!! Thanks to everybody. But I'm having problem going Online. I need to change the Path from DF1 to ETH-1 Protocol. Any idea how this is done?
Thanks,
Anthony!!!
-
Can someone help me on this, please.
Thanks!
Anthony
-
Hi Folks,
Here are the steps I'm using trying to communicate via Ethernet; As I explained before, this is an old CompactLogix 1769-35-L35E that was removed from a working machine. I'm able to communicate using the serial port but I have not success using ETH1-Ethernet. On the Controller, Tree I click on the Controller Ethernet card then properties and type in the IP I want to use, 192.168.1.10, my Computer IP is 192.168.1.6. Then I opened RSLinx , on the Host window I type again 192.168.1.10 but RSLinx is not recognizing this IP. Then I tried to Ping 192.168.1.10 but the destination Host is unreachable. Please look at the sequent below. Thanks in advance for all your help.
Anthony
-
Hi Folks,
Can someone help me with this topic, please. Any help would be highly appreciated.
Thanks
Anthony
-
Hi Daniel,
Thank you for your help. I'm still having problems communicating with the controller via Ethernet. This is what I did; I opened RSLinx, configured DF1 driver and established communication via RS-232. From the Controller tree, I changed the IP address from 10.10.50.131 to 192.168.1.10, my computer address is 192.168.1.6. I deleted the DF1 driver and configured Ethernet devices driver, then I added the controller IP on the Host name but the RSLinx is giving me Unrecognized Device. I also used BOOTP-DHCP and ping the Controller IP with the same result. is there something I've been missing? I appreciate your help on this topic.
Regards,
Anthony
-
Hi Daniel,
I opened the RSLinx Classic, selected the CPU/Ethernet Module and the the current IP Address is 10.10.50.131, and my Computer IP Address is 192.168.1.6, subnet 255.255.255. 0 but I still can't communicate. Any help would be appreciated.
Thanks,
Anthony
-
Hi folks, I'm trying to communicate with an old CompactLogix L35E via Ethernet. I have already establish communication via DF1 Serial port and was able to go online but I Do not know the IP address to communicate via Ethernet. Can someone please tell me how I could determine the IP Address or create a new one ? This Controller was remove from a working machine. Any help will be highly appreciated.
Thanks,
Anthony.
-
Hi Daniel,
Thank you for the quick response. I was able to communicate using serial port USB-SR232 cable but I would like to communicate via Ethernet. The processor is blank, no original machine program and I do not know the subnet range on the processor.
Best regards,
Anthony
-
Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated.
Thanks,
Anthony
-
Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated.
Thanks,
Anthony
ETH-1 Ethernet Protocol
in Allen Bradley / Rockwell Automation
Posted
Thank you guys!!!! I got it...