MrPLC Member
  • Content count

  • Joined

  • Last visited

Everything posted by TrevorD

  1. Hi All I find my self in the middle of a project where i am required to use 12 sew movigear motor/vsd's controlled over EtherNet IP by a Rockwell 5069-L330ER.  I dont have any expirence with these and as such was wondering if any one here has any pointers or better yet, a sample program that i would be able to go through to help teach me.  I have gone through the manual however im still a little confused as to some points. I would like to be able to start, stop and control speed, acc, dec ect like i can with a Powerflex 525 if its possible.  Trevor
  2. Micro850 CCW Panelview Help

    Is the hmi connected over ethernet? If so i have never done this before but have asked rockwell as it was a plan for an upcoming project.   The answer i got was that it shouldn't be a problem. Because ccw only allows you to have 1 hmi at a time, try open it in a separate project and add the tags manually. or save as the project under a different name and then create the second hmi in that separate file.    
  3. Hi all I have just entered the extremely frustrating world of Studio/rslogix5000.  After fighting for 2 years i have managed to convince management to purchase studio 5000 standard edition version 32 for our site.  I was extremely happy until i found out that the 1756-L61/B controllogix i was trying to upload from wasnt in the version 32 library.  After some reading online i found i was able to download version 20 for free and use that. So off i went to our machine to try upload the program when i find the firmware of the PLC is version 17 After downloading version 17 of rslogix i found that my activation is invalid and that i only have a 7 day grace period.  After some more reading i find that i am only able to get a minimum of version 20 for my version 32 licence.  If this is all correct, my question is then in regards to flashing the firmware of the plc before my 7day (now 3 day) grace period ends.  The rack consist of a few input and output modules, a Ethernet bridge module and a sercos 8 axis motion control module.  Would flashing the firmware on the CPU to version 20 effect any of those modules? would i have to flash the firmware of them too?  Am i doing something wrong to only be getting version 20 and 32 not 17?  Trevor      
  4. Controllogix firmware upgrade

    Thanks Joe That's what i would assume. It doesn't seem right to me that you buy the latest version and then all older models are now redundant so you can't get access to them.  It's very possible i am doing this all wrong. I don't understand why like other software its not backwards compatible in terms of version 32 being able to do all versions of plc firmware upto 32. It must be nuts requiring 20 versions of the same software. When i read this technote i understood it as im only able to get a minimum of version 20. If there is a way im able to rehost the licence or any other options im very open the hearing about it. i'm only 3 days experienced with everything so it it is possible i'm missing something. 
  5. Hi all I have a project where i am building a bread softness tester.  To do this i am using a smc electric actuator and an A&D scale. The electric actuator will push down on a slice onto an A&D scale.  A micro830 plc is then reading the data from the scale and storing the real variable in an array 80values long.  I would like to display on the hmi (panelview800) the peak/maximum value in the array. I am struggling on how to do this though and have not found much information online. any help would be much appreciated Thanks in advance Trevor
  6. Hello We have a machine called a tweedy mixer in a bread plant. It has 3x  SLC5/04 plc's and 2 Xycom industrial pc's running wonderware intouch 7. The system communicates over DH+. The issue  i have is that the DH+ network is obsolete and we require a new Industrial pc to replace a broken unit. unfortunately you cant not buy an industrial pc with DH+ anymore so we have had to use a prosoft AX-X2-AB to convert from DH+ to Ethernet.   This network seems to lag though and i would say the commands take around 10 seconds to reach the plc through the prosoft converter.  unfortunately that lag renders the machine completely useless. i have used multiple PC's and the issue hasnt resolved it self. I am wondering if there is anything i could check or do to try speed up the network. or if this lag is to be expected. I would also like to know if some one else has a similar system and if its running perfectly.  I look forward to your reply  Trevor
  7. SLC 5/04 timer pre

    Thank you for your reply.  I will look into using a counter set up or running 2 timers.  Seems like rslogix500 will take some getting used too. 
  8. SLC 5/04 timer pre

    Hi all I am brand new to rslogix500 I am a little confused as to the maximum value that can be placed into TON pre and acc. Being 16bits it should be 65535 how ever my current program has 32767 will increasing the value cause a problem. I cant see why you would want to have a negative number in a timer. Look forward to your reply Trevor
  9. S7-1200 timer

    Hi All I am struggling to get a TON in TIA v15 to work properly (s7_1212). I have tried reading what i can but still dont understand why what i have is not working.  I have attached a screen shot. I am trying to achieve a bit that is active for 1 scan cycle and resets every second. Coil1 is just staying active however and not resetting the timer.  What i have written works in Connected Components Workbench and other plc software i have used. What am i doing wrong? Thank you in advance. Trevor  
  10. S7-1200 timer

    using global memory fixed it thank you  
  11. FX-USB-AW Driver

    Thanks for the help guys, i managed to get it sorted this morning. Rookie mistake. I kept trying to get the program out of a sub folder. I just needed to specify the entire disk E.   
  12. FX-USB-AW Driver

    Hi all i am new to this thread i am having issues installing the fx-usb-aw drive onto my laptop (windows 10 64bit) i have tried downloading the driver from the CD and from online. My issue is that every time i go to device manager. i can only see the cable under "Other Devices". when i tell it to use the driver specified under the "easysocket usbdriver" in the programs under C drive or on the cd. it will state. "not able to find driver."  any help would be much appreciated  thank you
  13. FX-USB-AW Driver

    I have tried. It just keeps saying "Windows was unable to install you FX-USB-AW   Windows could not find the driver for your device."
  14. FX-USB-AW Driver

    Thanks Gambit i have tried installing it from the CD and i have also tried version 1.70. Unfortunately it wont let me install anything simply stating "can not find driver"  Trevor Davies
  15. FX-USB-AW Driver

    Thanks Kaare_t  I have attached a photo of the cd.