Alex Teeuwen

Dear Innoaloe,  Thanks for your reply.  I know that i coupled the wrong variable to my function block, I wanted to test if a nested struct would couple to this input, and that is not the case. The problem is that I want to be able to couple any struct to my function block, just like the AddDelimiter function, is it possible to create a input with the data type Struct? Thanks in advance.

Hello,  I am trying to define a struct as an input variable for a Function or Function Block. For example the function AddDelimiter (This is a standard Sysmac function), has a input variable with the variable type Struct, an it is possible to couple a struct to this input (See picture below). If i try to make my own function block with a struct or Structure as an input data type, i get the following error (See picture below). When I try to define a struct from the data types (In this case struct: Test) it doesn't give a error. But when I try to couple a struct to this input, that is a layer deeper than the function block struct i get the following error (See picture below). How can i define a struct as an function/ function block input? Thanks in advance.

Hello,  I am trying to connect a Weidmüller UR20 Ethernet I/P  (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word).   When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.