riandanualdy

MrPLC Member
  • Content count

    57
  • Joined

  • Last visited

Everything posted by riandanualdy

  1. WRITE MULTIPLE REGISTER MODBUS

    Hallo my name is Danu, i have a CP1E wirh CP1W-CIF11 and connect to modbus RTU device, i have done with write single coil, write single register,  read single register and read multiple register. But i try to write multiple register,  the indicator of CP1W-CIF11 is off and if i check d memory its no data. I attached my cx programmer. Can you help me create write multiple register in cx programmer?  Thank you AD4402-modbus edit edit edit edit edit.cxp
  2. NB DESIGNER Number Input

    Hello,  I done connect HMI NB7W series to PLC CP1E and just using input and output (0,0 and 100,00) and i can send data from weighing scale to PLC CP1E with RS232 communication. My Question is, if i want to send data from HMI NB7W to PLC CP1E but must input the new data first using number input in HMI NB7W, can i send a new data with RS232 communication (like send data from weighing scale to PLC CP1E)? so i can save the new data to memory in CP1E. I use NB Designer Software and CX Programmer software. If possible, can you tell me how to do it?  Thank you Riandanu
  3. halo, i'm newbie in HMI and PLC. i have a problem connect HMI omron NB7W-TW00B TO PLC OMRON CP1E. i done setting same baudrate,data bit,parity check, and stop bit in HMI and PLC and i use nb designer for create a HMI display. and this is attachment: a cx programmer, bit switch and bit lamp in nb designer. and the output in hmi is [2]PLC No Response:00-00-1 can you help me? thanks
  4. Input Name of User in CP1E

    Hello, my name is Danu. I have a project to print label to SATO printer with CP1E from my weighing scale. I can print weight data in label, and i think i dont have a problem with SATO and weighing scale. My question is, can CP1E input the name of user with keyboard or HMI (especially NB7W (because i just have NB7W)) and save it in memory in CP1E? because i want print a label with name of user, weight data, and name of goods. And my second question is, Does Omron PLC have a type that has 3 RS232 or 1 RS232 with 2 optional board for RS485 (CP1W-CIF11) and RS232 (CP1W-CIF01) ? Thank you.
  5. Input Name of User in CP1E

    How to input the name with NB and save it in to D memory in PLC? I Have CP1E-N30DT and include 1 RS232 port, if i want use 2 port RS232(for SATO dan HMI NB) and 1 port for RS485(For my weighing scale), what module can i use?   Thank you Danu
  6. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    i Try just send RW without CrLf and the output is just weight data without ?. And i think my problem its solved, Thank you for your help Mr. @Wasan and Mr @Michael Walsh. 
  7. Hallo, i want to connect Omron PLC CP1E use CP1W-CIF11 to AD4329A with RS485 communication.  my wiring is CP1w-CIF11     AD4329A SDA-                  SDA & RDA SDB-                 SDB & RDB and until now, i cant get data from AD4329A. Do you have any clue for this project?   Thank you Riandanu PLC to 4329A coba.cxp ad4329aex.pdf
  8. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    The post before this post i use ladder diagram V3, but if i use V2 and move it to my ladder diagram, the output is like this (check my image), first PLC get ST,GS,+0009675kg but after that the data change to ?T,GS,+0009675kg. I Attached the image for memory of PLC and i connect it from my weighing scale to PC and the second image is the output from PC 4329A TO CP1E TXD with command FIX.cxp
  9. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    Sorry, if i try again your ladder diagram, first the weight data is move to D60 and after that clear the data in D60, but if i change the position between RXD and BSET, just clear the data, not to get weight data. rs485 CP1E - AD4329A - V3 -20190503.cxp
  10. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    I try with your  ladder diagram and its working. And actually if i use your ladder diagram and change SW 5 in CP1W-CIF11 to ON/OFF its not change anything.  My question is, Does all of serial communication(RS232 and RS485) With PLC (receive and transmit data) always must clear data memory before receive the data? Can you explain to me what different between LD and @LD ?  
  11. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    It's true if i send MTCrLf command, D60 is have data MTCrLf too but always move to D61. but i think its normal because if you read the manual book, if i send command MTCrLf the scale will send MTCrLf too to PLC, but why if i use command RWCrLf, the feedback is just not the weighing data but RWCrLF+weighing data. should i reset the port like RXD before?
  12. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    I think i dont have a problem with command Zero and Tare, but if i use command RWCrLf to get weighing data the output is random not like stream mode or manual print mode, normally the output is ST,GS,+0000825 kg CrLf. What should i do if i want to get the normally data? rs485 CP1E - AD4329A.cxp
  13. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    @Wasan @Michael Walsh yeah i done try your ladder diagram, and its working. How about the TXD? if i use command mode and the example of command is MTCrLf or MZCrLf. i done try to create ladder diagram, but i think its not working at all, but i think PLC done send data because if i change 0.02 to On the led in CP1W-CIF11 is blinking. Thank you    
  14. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    its working i think, i try use stream mode (send data repeatly) the memory can save data from weighing scale but sometimes A392.12 is ON and cant go off again, And i read A392.12 description is ON when a communications error has occurred at the serial option port. The port must be restarted when this flag turns ON. What is port address for me to restarted when A392.12 is ON?
  15. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    Mr. @Michael Walsh i think if i push print randomly with that ladder diagram, A392.12 is ON, A392.14 is OFF and must restart PLC again if want to send data (A392.14). And if i use Stream Mode (Send Data Continously), i think can't use this ladder diagram. any solution so i can compare the weight data (just number) like this picture and ladder diagram? Thank you 4329A TO CP1E MOV DATA.cxp
  16. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    Hello Mr Michael, I done checking D0 and data is same with AD4329a, but maybe sometimes if i push manually repeatly, A392.12 is on, A392.14 is off and can't get data and i think cant send data again after a392.12 is on. but my question is what different with your ladder diagram and my ladder diagram before? can you explain to me?
  17. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    i done change dip switch all of them is OFF and change F-47 to 1.  and still cant get the data, just get from A394 is &16 and its true because total of data is 16 digit.
  18. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    This is manual book for RS485 OP-03-AD4329A.docx
  19. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    i done clear PLC memory and push print and check data again in D10 output still 00 but A394 is 16 and i think A394 is true because total data is 16,  
  20. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    This is the memory D10. Actually the output from 4329A is ST,GS,+00001.3 kg (example).
  21. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    I use 4 cable, CP1W   4329A RDA      SDB RDB      SDA SDA      RDA SDB      RDB and i attach the screenshot of cx programmer but still i cant get the data from weighing scale if i push print (Manual Print Mode).
  22. HOW TO CONNECT PLC OMRON CP1E TO RS485 DEVICE (CLEAR)

    Sure i done adjust DIP switch pin 1,2,3 ON and 4,5,6 OFF, but still cant get the data. Is that the setting of PLC Settings and ladder diagram is true? because im not sure about that.
  23. Hallo, i want to connect PLC Omron CP1E to indicator weighing scale with modbusRTU connection and i have a CP1W-CIF11 module to connect indicator with CP1E. ,but I have no experience in RTU modbus communication in the PLC. How do i start?   *i just need output: 1. Coil (Reference No = 0. Output bits) for input switch with address 3 (Tare). 2.Input Status (Reference No = 1) for output lamp with address 17 (stable) 3.Input register (Reference No = 3) to read data with address 5 (gross weight) 4. holding register (Reference No = 4) to write comparison data with address 17(over) page 85 - 94 in attachment     ad4402_manual.pdf
  24. HMI CONNECT TO NON PLC WITH RS232

    HELLO, i want to ask. Can HMI connect to Non PLC device(example: zebra printer,Barcode Scanner or Weighing scale) using rs232 ? if can, can you suggest me what type of HMI that can connect to Non PLC device Using rs232 communication? thank you, have a nice day....
  25. WRITE MULTIPLE REGISTER MODBUS

    Finally i can create write multiple register, i just follow the pdf you give me. I want ask, how to read data (read input register and read holding register) real time or in data memory always display the real time data?