anishb92
MrPLC Member-
Content count
20 -
Joined
-
Last visited
-
Yes the FX5U detects the Rotation in clockwise and anti-clockwise direction but counts are not Proportional to rotations. A 500ppr encoders doesn't measure 500 counts upon one clockwise rotation. similarly for anti-clockwise mode.
-
Hello, Thank u foe the setting, i wired up the hardware and downloaded ladder into plc. But the encoder misses the pulses The encoder is line driver type and has output as A B Z A' B' Z' My local suppier says line driver encoder can work as open collector output and should be compatible, but mitsubishi channel partner recommended open collector output or use a module to make it compatible... Which kind of output is okay with FX5U cpu ???
-
i executed the FBD in my FX5U and atached encoder Phase A - X0 Phase B - X1 after resetting the CPU, when i rotate encoder in CW direction the Pulses counts but when CCW direction the pulses again increase instead of decreasing. no negative effect on count in SD register
-
Thanks was of gr8 help !
-
Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same. i am unable to fetch counts... Encoder: 500ppr, 24V line drive, A-B phase, PFA datasheet
-
Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same. i am unable to fetch counts... Encoder: 500ppr, 24V line drive, A-B phase, PFA datasheet Hollow Shaft encoder.pdf
-
Hello Everyone, I am struggling with interfacing Incremental encoder with FX5U PLC, Does anyone have parameter setting and sample program for same. Encoder: 500ppr, 24V line drive, A-B phase,
-
can u mention the link for GT designer 3 latest version download !? i am stuck in older version of software ! it will be of gr8 help, thanks
-
No ethernet communication
-
can anyone please mention procedure for FX5U - GS2107 Ethernet communication
-
i am unable to connect FX5U and HMI kindly suggest measures for successful connection any tutorial is there ?
-
Ohkay ! will try this ! Thanks again :D
-
but came up with new issue ! in my editor this is the basic sample design and i made as described in training manuals i made 2 switches and one bit lamp on HMI switches are visible but the bit lamp and all output devices like numerical disply is not on Physical HMI, even simulator of GT3 shows all components
-
yeah This worked ! i gave write command and powered on at same time !!! it is updating to new project now ! this worked Thanks a ton !
-
HMI screen Freezes to this startup logo screen it doesnt move forward