vinothkumar2012

MrPLC Member
 View profile  See their activity

  • Content count

    9

  • Joined

  • Last visited

Community Reputation

0 Neutral

About vinothkumar2012

  • Rank
    Newbie

Profile Information

  • Country Trinidad and Tobago
  1. Hi, Thanks for all, I misunderstood for TAG configurations. I changed as base tag. Now it is working from panelview.
  2. Hi, Thanks,  I start and stop from ladder its working good. but when i start from HMI it is not start and stop.I did mapping correctly. What i mentioned before when i start from ladder its working and i could see from HMI (the OUTPUT " RUN" indicator is glowing), only i can't start and stop from HMI.(INPUTS). I checked TAG External access is READ/WRITE in both PLC and HMI. sorry, i am not well in English.
  3. Hi Sparky, i am new for A&B plc, i had experience in Omron. anyway i read the manuals and i will try. Thanks for your patients and gave me a reply.  
  4. I tagged correctly  Start is LOCAL:1:I.DATA.0, STOP BUTTON IS LOCAL:1:I.DATA.1, OUTPUT INDICATOR IS LOCAL:1:O.DATA.0. The same tag is in the ladder logic also. when i force on input the output is energised and i can see in the HMI output indicator. only i could start and stop from HMI i checked HMI tag, and it is correctly.  
  5. Even i try to toggle in  (LOCAL:1:I.DATA.0) ladder while online. but it is not working.  Tag is READ/WRITE
  6. Hi Sparky, Thanks a lot now it is connected. And i try to start from HMI but it is not started. But when i toggled in ouput the hmi indication button is glowing. Anyhting i have to do in ladder daigram
  7. Hi, You mean same  ip address : 192.188.152.110 
  8. PV ip address is 169.254.170.100 subnet mask : 255.255.255.0 L24 also same subnet mask : 255.255.255.0
  9. vinothkumar2012 started following Panelview 800 to Compactlogix L2 controller communication problem
  10. Hi Experts, Recently we bought Compactlogix 1769-L24ER-QBFC1B & Panelview 800 2711R-T4T. I trying to connect Panelview terminal to Compactlogix controller through Ethernet. I have CCW version 10.01 and Panelview 800 version 4.014. I write a small program and downloaded to plc successfully by studio 5000. Then I write a panelview application and downloaded to terminal successfully. Then I connect PLC to Panelview 800 terminal through Ethernet. After I try to operate from HMI but no response. Communication not established. I get error message in HMI (please see attached copy).   Not:- I found when I connect PLC to Panelview Terminal 800 Indicator (NS) is still blinking not stable. I read the manual it showing Communication not Established. Please help me to sort out this isue. Thanks, Regards, M.Vinothkumar T1.xls